Plastic ID Card Printers

The Zebra ZC300 Dual-Sided bundle gives you everything you need to start printing double-sided ID cards in-house, straight out of the box.Replacement ribbons: Zebra ZC300 ribbons.Included in the bundle:Zebra ZC300 dual-sided ID card printerZebra CardStudio 2.0 ID card design software licence200 blank white PVC cardsZebra YMCKO full colour ribbon (200 prints)The ZC300 Dual-Sided prints both sides of a card in a single pass, at 300 dpi edge to edge. It handles up to 450 monochrome cards an hour or 140 in full colour. It prints CR79 and CR80 cards in PVC or PVC composite, with a feeder that adjusts to the card thickness automatically.AES data encryption protects card data on its way to the printer. Advanced host authentication stops unauthorised devices from sending print jobs to it over the network.Need encoding, a webcam or extra ribbons and cards? Call or email the Plastic ID team and we will talk you through the options...

IDP Smart 21S ID Card Printer Overview The IDP Smart 21S is a compact, entry-level printer built for small organisations, schools and clubs that want to print ID cards in-house without a big upfront cost. It offers single sided card printing in 24 seconds for full colour and just 6 seconds for monochrome.Compatible ribbons: IDP Smart 21 ribbons. How It Prints The Smart 21S uses direct-to-card printing. Direct-to-card printing works by pressing the printer ribbon directly against the surface of the card as it passes under the printhead, transferring colour or black text straight onto the card in a single pass. It's the same principle as a thermal transfer label printer, just applied to a plastic card instead of paper. Because the printhead sits right against the card, it's fast and inexpensive per card. The Smart-21 feeds one PVC card at a time, fed in by hand, so it suits steady, on-demand printing rather than large unattended batches. It prints up to 150 full-colour cards an hour or 600 in monochrome, at up to 1200 dpi, which is sharp enough for photo IDs, logos and small text without looking soft or pixelated. SmartMark comes as standard with most IDP printers. This is a visible security overlay that can be customised with your own text, logo or design, making a card harder to convincingly copy or tamper with. An optional Kensington lock can also add physical security if the printer's sitting somewhere accessible rather than in a locked office. Is This the Right Printer for You? This printer doesn't encode cards and it's not suited to access control cards with an embedded chip, the chip can damage the printhead over time. If you need to encode magnetic stripe or contactless cards for door access, look at the IDP Smart 31 instead. If you're printing straightforward photo ID, membership or visitor cards without encoding, the IDP Smart ID card printer range is an excellent choice. It's one of the easiest-to-use card printers on the market and makes printing staff ID cards a really straightforward process. Software and Compatibility A free copy of EasyBadge Lite card design software comes included with this printer, which is Windows-only, as is the ID printer itself. Please note: ribbons and blank cards aren't included with this printer. Add compatible consumables to your order so you're ready to print as soon as it arrives. Key Features: Direct-to-card, single-sided printing Hand-fed card feeder Print speeds up to 150 full-colour cards/hour, 600 monochrome cards/hour Resolution up to 1200dpi SmartMark visible security overlay, customisable, included as standard Optional Kensington lock Dimensions: approx. 179mm x 169mm x 259mm Weight: 2.7kg 2-year manufacturer warranty (3-year optional extension available; printhead covered for 3 years) Includes EasyBadge Lite design software (Windows only, 100 record limit) Compatible with Windows only What's Included: ..

Magicard Pronto100 ID Card Printer Overview The Pronto100 is Magicard's fastest printer in its smallest package. It's built for small offices, schools and businesses that need professional ID cards without a large-scale system or costly setup. It's a hand-fed printer able to print a full-colour card in 23 seconds (with a higher-speed colour option with slightly less quality at 18 seconds) and monochrome cards are printed in just 5 seconds. How It Prints The Magicard Pronto 100 uses direct-to-card dye-sublimation printing, applying full colour edge-to-edge onto standard CR80 cards. It's rewritable too, so a card can be wiped and reprinted rather than thrown away when a design needs changing. This is really useful for temporary passes or anything that gets updated regularly. USB and Ethernet connectivity both come as standard, so it fits onto a shared network from day one rather than needing a workaround. Security Built-In as Standard Every Pronto100 includes HoloKote watermarking, which is included on most Magicard printers. HoloKote is a visual security watermark that Magicard prints directly into the design of a card, a faint pattern or logo (there are three standard designs to choose from) that overlays the printed image and makes cards difficult to reproduce or fake. It's there to make a counterfeited or tampered card obvious at a glance, without needing any special equipment to check it. Digital Shredding is also included with this printer, which renders data unreadable after each job to help with GDPR compliance. It's also threat-benchmarked, tested against the same security standards used on Magicard's higher-end printers, so security is not scaled back because it's the smaller model. For an extra security layer, HoloPatch cards are available, which add a reflective security mark that makes cards even more difficult to replicate. Day-to-Day Management Clix, Magicard's remote management interface, lets you monitor supplies, check printer status and manage maintenance without needing to be standing at the printer itself, which is handy if it's not sitting on your own desk. Is This the Right Printer for You? For standard staff ID, membership and visitor cards without encoding, the Pronto100 is a fast, easy-to-use choice with lots of features that aren't commonly found in this price bracket. However, as a direct-to-card printer, the Pronto100 isn't recommended for access control cards with an embedded chip; printing directly over a raised chip can damage the printhead. If you need to encode cards for door access, the Magicard 300 is the better starting point. Key Features: Direct-to-card dye-sublimation printing, edge-to-edge Rewritable card support Print speeds: 23 seconds (standard colour), 18 seconds (high-speed colour), 4.7 seconds (monochrome) 50-card input and output hoppers, hand-fed USB and Ethernet connectivity, standard HoloKote watermarking (3 standard designs), optio..

Zebra ZC300 ID Card Printer (Single-Sided) Overview The ZC300 is built for organisations issuing ID cards regularly, not occasionally. It has card printing capabilities of up to 900 monochrome cards an hour or 200 in full colour, so it's designed for keeping up with busy production runs. And at 300dpi edge-to-edge printing, your card design comes out exactly the way you want it every time. It's a strong step up from an entry-level printer without the cost or complexity of an enterprise system.Compatible ribbons: Zebra ZC300 ribbons. Key Features: Direct-to-card, dye-sublimation thermal transfer printing, edge-to-edge 300dpi resolution Print speeds up to 900 monochrome cards/hour, 200 full-colour cards/hour (single-sided) Dual-sided model: up to 450 monochrome cards/hour, 140 full-colour cards/hour Compatible with CR79 and CR80 cards, including PVC, PVC composite, adhesive-back and writable-back stock Automatic card thickness adjustment Matched input and output hopper capacity AES data encryption and host authentication for network security Kensington lock point on printer cover Optional magnetic stripe encoding (high and low coercivity) Optional third-party contactless encoding USB and built-in Ethernet connectivity, standard Optional WiFi upgrade Compatible with Windows (including Server editions), Mac and Linux LCD interface with on-screen design preview Cassette-loaded ribbons for easy changes Saloon-style output doors for quick card removal Dimensions: 258mm (H) x 157mm (W) x 383mm (D) Weight: 4kg (single-sided), 4.4kg (dual-sided) Speed and Card Handling Single-sided, it runs 900 cards an hour in monochrome or 200 in full colour. The dual-sided version manages 450 monochrome or 140 full colour, printing both sides in the same pass. It prints to CR79 and CR80 cards, in PVC, PVC composite and even adhesive-back or writable-back stock. The feeder adjusts automatically to card thickness and because input and output hoppers share the same capacity, both empty and refill together rather than one running out before the other. Built-In Security AES data encryption protects card data as it's sent to the printer and advanced host authentication stops unauthorised devices sending print jobs to it over the network. A Kensington lock point on the printer cover protects both the printer and any card stock or rejected cards inside it, which is vital for protecting information if the printer is sitting in a public-facing space rather than a locked office. Encoding and Connectivity Magnetic stripe encoding (high and low coercivity) and third-party contactless encoding are both available, so the ZC300 can produce access control cards as well as standard photo ID. USB and built-in Ethernet come as standard, with an optional WiFi upgrade if you'd rather avoid running network cable. It's compatible with Windows (including Server editions), Mac and Linux. Day-to-Da..

Zebra ZC100 ID Card Printer with USB (Single-Sided) The Zebra ZC100 single sided card printer supplied through Plastic-ID as an authorised Zebra dealer, built for organisations printing staff IDs, membership cards or event passes in-house rather than outsourcing to a print bureau. It connects via USB as standard, with Ethernet available as a field upgrade if you need it on the network from day one.Compatible ribbons: Zebra ZC100 ribbons. Built to replace the ZXP Series 1 The ZC100 is Zebra's direct successor to its ZXP Series 1 card printer and it's genuinely faster: up to 30% quicker in monochrome and 15% quicker in full colour than the model it replaces. If you're comparing specs against an older Zebra printer you've used before, these are the practical differences you'll notice on a daily basis and why upgrading now is a great option. Security features that go beyond a locked drawer AES data encryption protects card data as it's sent to the printer and printer-to-host authentication means only devices the printer recognises can send it a job in the first place, so a laptop plugged in without permission can't start printing your organisation's ID cards. Physically, the printer cover has a Kensington lock point built in, protecting the printer itself and the card stock loaded inside it from theft, useful anywhere it'll sit in an open reception area rather than a locked office. Genuinely simple to run day to day The card feeder adjusts automatically to whatever card thickness is loaded, so there's no manual recalibration switching between card types. The driver interface shows an on-screen preview of your design before it prints, which cuts out the cost and time of repeatedly printing test cards just to check alignment. Ribbon changes are built to be difficult to get wrong and Zebra's own engineering brief for this model was making it the slimmest printer in its class, so it sits comfortably on a reception desk or a shelf rather than needing dedicated floor space. Zebra ZC100 Specifications This Zebra card printer features some really impressive specs, including: Manufacturer Zebra Model ZC100 (33-1065) Print technology Dye-sublimation / thermal transfer, direct-to-card Print sides Single-sided Card format CR80, various plastic card thicknesses Resolution 300dpi Print speed Up to 700 cards/hour monochrome, up to 150 cards/hour full colour (YMCKO) Card hopper capacity 100 card input hopper, 100 card output hopper, auto-adjusting for card thickness Connectivity USB as standard, Ethernet as a configuration option Encoding options Field-upgradeable ISO HiCo/LoCo magnetic stripe, software-selectable Security features AES data encryption, printer-to-host authentication, printer cover with Kensington lock point Warranty 3-year limited warranty on printer and printhead Dimensions 258m..

Evolis Zenius 2 ID Card Printer Overview The Evolis Zenius 2 is a compact, single-sided desktop printer suited to small and medium-volume card programmes. Schools, corporate offices, membership organisations and reception desks issuing employee ID cards, student IDs or membership cards in manageable runs will find it covers the job without demanding dedicated space or IT involvement. The printer comes in two versions. The Zenius 2 Classic is for single-workstation use, and the Zenius 2 Expert is for teams that need network printing or plan to add encoding to their cards. Specifications Specification Detail Print technologyDirect-to-card dye-sublimation/resin thermal transfer; rewrite Print modeSingle-sided, edge-to-edge Colour print speedUp to 180 cards per hour Monochrome print speedUp to 700 cards per hour Resolution300 × 300 dpi standard; 300 × 600 dpi enhanced colour and monochrome; 300 × 1200 dpi enhanced monochrome Input hopper50 cards (0.76 mm / 30 mil) Front output hopper25 cards Rear output hopper50 cards Card sizeISO CR-80, 85.6 × 53.98 mm Card thickness0.25 to 0.76 mm (10 to 30 mil) Card typesPVC, composite PVC, PET (monochrome only), paper (monochrome only), rewritable ConnectivityClassic: USB; Expert: USB and Ethernet OS compatibilityWindows and macOS SoftwareEvolis Premium Suite 2 driver; ID-ALL Starter Edition (developed by CARDPRESSO) Security featuresDigital erasing; Kensington lock slot Expert-only featuresEthernet connectivity; YMCKOO ribbon support; encoding options Encoding options (Expert)Magnetic stripe, contact chip, contactless Dimensions196 × 205 × 310 mm Weight3.3 kg Noise level47 dB (A) operating Warranty3 years What’s Included: Evolis Zenius 2 printer Back output hopper (50 cards) USB cable Power supply and mains cable Starter cleaning kit Quick start guide ID-ALL Starter Edition software licence Print quality and speed for a working card programme The Zenius 2 prints full-colour cards at up to 180 cards per hour, so a batch of 50 staff ID cards takes around 17 minutes to run through. For plain-text or barcode-only cards, the monochrome speed climbs to 700 cards per hour. That makes it practical for bulk visitor passes or temporary credentials where colour isn’t needed. Resolution starts at 300 dpi. An extended resolution mode reaches 300 × 600 dpi for colour and monochrome work, and 300 × 1200 dpi for monochrome. A built-in colour profile manages colour accuracy, so photos and logos reproduce consistently without manual calibration between jobs. Rewrite technology comes as standard on both models. It lets you print, erase and reprint the same card, which suits visitor badges, library cards or any credential that gets updated regularly rather than replaced. Digital erasing is also built into both versions. After each job it ..

Magicard 600 ID Card Printer Overview The Magicard 600 is built for organisations printing ID cards regularly and at real volume. With up to 190 full-colour cards an hour, a single card with HoloKote prints in under 20 seconds, without the cost of an enterprise-grade system.Compatible ribbons: Magicard 600 ribbons. This is one of the latest Magicard printers and it's built on the high quality legacy that the range has offered for decades. From its headquarters in Weymouth, Magicard has developed some of the best plastic card printers in the world. Print Quality and Speed At 600 x 300 dpi, the Magicard 600 renders even small text and fine detail legibly and its wide colour spectrum gives a truer representation of photos and logos rather than flattened, over-saturated colour. Compared to the Magicard 300, the 600 prints faster and at a higher quality. Full colour cards print at up to 190 cards an hour and monochrome up to 750. The 100-card input hopper means you're not stopping to reload every few minutes on a longer batch, either. Magicard 600 or Magicard 600 Duo? The Magicard 600 is available as a single-sided printer or as the Magicard 600 Duo, upgraded for double-sided printing as standard. If your cards only need a photo and name on the front, the standard 600 covers it. If you need information on both sides, terms and conditions, a barcode or a second language, for example, the 600 Duo prints both in the same pass rather than needing the card flipped and run through twice. Both share the same print engine, speed and security features. Security Built In as Standard Digital shredding fragments print data after each job, so the printer itself can't be used to recover what's been printed or access cardholder information. Beyond that, the Magicard 600 is threat-benchmarked; its software and system configuration are run against Nessus Pro, a widely used vulnerability assessment tool, which is the same standard of scrutiny you'd expect across the rest of your IT estate. HoloKote watermarking is standard too and pairing it with HoloPatch cards highlights one section of the watermark as a reflective, high-visibility seal, which makes your cards harder to replicate convincingly. Connectivity and Compatibility USB, Ethernet and WiFi (802.11b/g/n via the supplied dongle, with WPA or WPA2 encryption) all come as standard, so the 600 fits onto a network out of the box with minimal setup. It's compatible with Windows 7, 8, 10 and 11 (32 and 64-bit), Windows Server 2008, 2012 and 2016, Mac OS and Linux with CUPS support, so it isn't locked to one type of office setup. Built in the UK Every Magicard 600 is designed and manufactured in Weymouth, UK, by Magicard by Brady. It's backed by a 3-year MagiCover Plus warranty, covering printhead replacement and a loan printer swap if yours needs repair, so a fault doesn't mean going without a working printer. Choosing to buy your Magicard 600 from Plastic ID mean..

About the Evolis Badgy 200 ID Card Printer Overview of the Badgy200 Card Printer The Badgy 200 is an entry-level, single-sided ID card printer built for organisations with small, regular print runs rather than high-volume production. It produces professional, edge-to-edge PVC cards carrying photos, text, logos, and barcodes. Its quick setup and intuitive interface ensure that no specialist training is needed to get started. Please note: this listing is for the printer only. Ribbons and blank cards aren't included; add compatible consumables to your order before you check out, so that you're ready to start printing the moment your Badgy 200 printer arrives. Evolis Badgy 200 is ideal for printing a variety of ID cards, such as: Employee badges Student IDs Membership cards Loyalty cards Event passes Business cards How It Works Badgy 200 installs and runs like a standard office printer. Cards load into the feeder and come out through the output hopper, both at the front of the printer, so there's nothing awkward to thread through or configure. Ribbons click into place and are automatically recognised, no manual setup required. Evolis Badge Studio software comes included, giving you a working design tool from the moment it's set up, and a free template library is also available online if you'd rather start from a ready-made design than build one from scratch. Speed and Capacity The Badgy 200 prints up to 95 colour cards per hour, or a single card in around 38 seconds, at 300 dpi resolution. The input feeder and output hopper each hold 25 cards. They're sized for printing on demand and small batches rather than running large overnight batches; load what you need, print it, and top up again for the next run. Built for a Desk, Not a Print Room At 147mm x 200mm x 276mm and 1.7kg, this ID card printer is smaller than an A4 sheet of paper and light enough to move between desks if needed. The size means that this won't clutter up the workspace, and the design means that everything happens at the front of the printer (loading and unloading cards), so this printer is an excellent choice if you need an ID card instantly but don't want a printer that needs a dedicated space or entire desk. It connects over USB and runs on Windows and Mac, so it fits straight into most existing office setups, and thanks to an easy-to-use interface, printing badges as you need them is as straightforward as printing on a normal printer. Features and Benefits Direct-to-card dye-sublimation and resin thermal transfer printing Single-sided, edge-to-edge printing 300dpi resolution Print speeds up to 95 full-colour cards/hour 25-card input feeder, 25-card output hopper USB connectivity Compatible with Windows and Mac Dimensions: 147mm (H) x 200mm (W) x 276mm (D) Weight: 1.7kg 2-year warranty Includes Evolis Badge Studio design software Don't Forget Your Consumables To..

The PriceCardPro Flex+ Bundle includes: 1 x PriceCardPro Flex+ printer 4 years Ultra Cover (in the event your printer breaks, then a loan unit will be supplied whilst yours is being repaired) 1 x white monochrome printer ribbon (1000 prints) 100 x matte black cards (140 x 54mm) 100 x matte black cards (86mm x 54mm) PriceTag design software 703-5101 PriceCardPro Flex+ Printer The PriceCardPro Flex+ meets high-volume card printing requirements to produce batches of up to 100 bespoke price signs for food displays - ideal for those not needing price signs on an ad-hoc basis. With print speeds of less than 23 seconds per card, you can produce high-quality price signs to improve your counter displays quickly and efficiently.Replacement ribbons for the Flex+ are listed under PriceCardPro ribbons. With the longer format cards, you can add as much information as you need. Include your logo, the product's title, a description, pricing, allergen icons and more so your customers know everything they need to know about your products. This improves the attractiveness of your counter display and reduces the time you spend writing out price signs by hand, giving you further time to dedicate to other areas of your business...

Zebra ZC350 ID Card Printer Overview The ZC350 is Zebra's top-of-the-line printer in the ZC series, built for organisations that want everything: fast, professional card printing with genuine security features and an easy-to-use interface.Compatible ribbons: Zebra ZC350 ribbons. Key Features: Direct-to-card printing, edge-to-edge, 300dpi resolution Print speeds up to 225 full-colour cards/hour (single-sided) and 1,000 monochrome cards an hour Dual-sided model: up to 150 full-colour cards/hour, up to 500 monochrome cards/hour Reworked card hopper for smoother, uninterrupted batch printing Suitable for photo ID, access control, membership, gift, loyalty and payment cards AES data encryption and printer-to-host authentication Kensington lock point on printer cover Optional magnetic stripe encoding (high and low coercivity) Optional contactless encoding USB and Ethernet connectivity, standard SDK available for custom application integration On-screen design preview, no test cards needed Saloon-style output doors for easy card removal Easy-change ribbon cassette Compact footprint, suited to counters and reception desks 3-year manufacturer warranty on printer and printhead Dimensions: Single-sided: 258mm (H) x 157mm (W) x 383mm (D), weight 4.0kg (8.8 lbs) Dual-sided: 258mm (H) x 157mm (W) x 468mm (D), weight 4.4kg (9.7 lbs) Speed and Card Handling Single-sided, it prints up to 225 full-colour cards an hour and 1,000 monochrome cards at 300dpi, edge-to-edge. The dual-sided version manages up to 150 full-colour cards an hour or 500 in monochrome, printing both sides in the same pass. A completely reworked card hopper keeps a badging programme running smoothly rather than needing constant attention and it handles more than standard photo ID, with employee badges, membership cards, gift cards and loyalty cards all possible. Built-In Security AES data encryption protects card data as it's sent to the printer and printer-to-host authentication stops unauthorised devices sending print jobs to it over a network. A Kensington lock point on the printer cover protects both the printer and any card stock or rejected cards inside it from being taken, which is useful when it's sitting in a public-facing space rather than a locked office. Encoding and Connectivity Magnetic stripe encoding (high and low coercivity) and contactless encoding are both available, so the ZC350 can produce access control cards alongside standard photo ID. USB and Ethernet come as standard and it's built for easy integration, with an SDK available for custom applications if your organisation needs one. Day-to-Day Use An on-screen preview shows your design before it prints, cutting out the need for physical test cards. Saloon-style output doors and easy-change ribbons make daily operation straightforward and the ZC350's compact size means it fits easily on a counter ..

IDP Smart-31 ID Card Printer Overview The IDP Smart 31 is a straightforward, entry-level card printer built for small businesses, schools, and organisations printing less than 100 high-quality ID cards at a time. How It Prints The Smart 31 uses IDP's FINE™ imaging technology to produce full-colour or monochrome cards with sharp detail at up to 156 full-colour cards an hour. It's built for standard photo ID: staff badges, membership cards and visitor passes, printed directly onto the card surface. A small, deliberate border stays around the edge of every card too, protecting the printhead so print quality stays sharp and consistent, card after card. With the right card design, this border is barely noticeable, and at a 300 dpi minimum, your cards look great fresh off the printer and for years afterwards. Please note: Because this is a direct-to-card printer, it's not the right printer type for access control cards; that's a job for a retransfer printer instead. This is because the embedded chip can cause blemishes as the card moves across the printer head. Choosing the Right Variant The Smart 31 comes in three configurations. The 31S is single-sided, the standard starting point for most organisations. The 31D adds double-sided printing if you need information on both sides of the card. The 31R is a rewritable, monochrome-only version: instead of using a ribbon, it wipes and reprints the same card up to 500 times, which is a useful option for temporary passes or visitor badges that change constantly, since it removes the ongoing ribbon cost entirely. Security That Punches Above Its Price PC authentication locks the printer to a specific machine, so it's no use to anyone if it's stolen, and USB data is encrypted as standard. UV ink printing adds an image or text only visible under UV light, and a customisable SmartMark watermark, using your own text, image, or logo, sits under a transparent overlay for an extra visible layer of security. With all of the built-in security, cloning a Smart 31 card convincingly is genuinely difficult. Software and Compatibility A free copy of EasyBadge Lite comes included, limited to 100 records and Windows only. If you need Mac compatibility or a higher record limit, cardPresso is the better fit and is sold separately. The printer itself connects over USB as standard, with Ethernet available as an upgrade, and it's compatible with Windows 7, 8, and 10, Mac OS, and Linux. Please note: ribbon and blank cards aren't included with this printer. Add compatible consumables to your order so you're ready to print as soon as it arrives. Key Features: Direct-to-card printing, FINE™ imaging technology Print speeds up to 156 full-colour cards/hour (approx. 23 seconds per card) Available as single-sided (31S), double-sided (31D), or rewritable monochrome (31R, reusable up to 500 times) Print resolution: 300 dpi (Colour), 600 dpi / 1200 dpi (Mono) UV ink printi..

The Zebra ZC100 is a single-sided card printer built for low to medium print volumes and this bundle gets you printing on day one: printer, design software, ribbon and blank cards all in one.Replacement ribbons: Zebra ZC100 ribbons. What's included in the ZC100 Card Printer Bundle Zebra ZC100 single-sided ID card printer CardStudio 2.0 card design software 200 blank white PVC cards Zebra YMCKO full-colour ribbon (200 prints) We'd recommend picking up an additional printer ribbon and pack of cards while you're here too, as well as some lanyards and card holders. But even if you just buy this bundle, you'll have everything you need to start printing ID cards in your organisation. Zebra ZC100 Printer Overview This Zebra card printer is a single-sided card printer built for straightforward, low to medium-volume ID card printing. It prints up to 150 high-quality, full-colour cards an hour at 300dpi onto standard CR80 cards, with a plug-and-play setup and an automatic card feeder that adjusts to different card thicknesses without manual tweaking. Security is built in rather than added on: AES encryption protects card data in transit and printer-to-host authentication stops unauthorised devices sending jobs to it. It's a compact, intuitive printer suited to receptions, offices and customer-facing counters alike. Features and Benefits Dye-Sublimation / Thermal Transfer Printer Technology Print Up To 150 Cards Per Hour (Full-Colour / YMCKO), Up To 700 Cards Per Hour (Monochrome) Standard CR80 Size Compatibility Standard Single-Sided, Edge-to-Edge Printing 300dpi Resolution 100 Card Input Hopper Capacity 100 Card Output Tray Capacity Automatic Plastic Card Thickness Adjustment AES Data Encryption to Protect Sensitive Data During Printing Print-To-Host Authentication Prevents Unauthorised Printing Printer Cover with Kensington Lock Point to Prevent Card Theft Dimensions: 258mm (H) x 157mm (W) x 383mm (D) Weight: 3.9kg (8.6 lbs) USB Connectivity as Standard, with Optional Ethernet Upgrade Optional Magnetic Stripe Encoding 3-Years Limited Printer and Printhead Warranty Effortless Card Feeding with Redesigned Input/Output Hoppers Built-in security features, not bolted on This Zebra printer has advanced security features such as "government-grade encryption" data protection. AES encryption protects card data as it's sent to the printer and printer-to-host authentication stops unauthorised devices from sending print jobs to it in the first place. On the physical side, the printer includes a Kensington lock point, so it can be secured to a desk rather than left free for anyone to walk off with, along with the card stock loaded inside it. Day-to-day handling The card feeder automatically adjusts to whatever card thickness you load, so there's no manual recalibration between batches. Ribbon changes don't need a manual either, each printer ribbon comes pre-loaded into a casse..

Evolis Primacy 2 ID Card Printer Overview The Evolis Primacy 2 is built for organisations issuing ID cards at medium to large volumes. It combines speed and quality with a level of security flexibility that most printers at this tier don't offer as standard. How It Prints The Primacy 2 uses dye-sublimation for full-colour cards and thermal transfer for monochrome, printing edge-to-edge on single or dual-sided cards. Rewrite technology comes as standard, letting you print, erase, and reprint the same card in seconds, which is a useful cost saver for visitor badges, student cards, and anything else that gets updated regularly rather than issued once. With 300 x 600 dpi in full colour and 300 x 1200 dpi in monochrome, the Primacy 2 offers some of the highest-quality ID cards on the market. Speed and Capacity Single-sided, it prints up to 280 cards per hour. The dual-sided version manages up to 170 cards an hour, printing both sides in the same pass. A 100-card feeder comes as standard, with a 200-card feeder available as an upgrade if your volume grows. High-resolution printing mode, paired with Evolis's colorimetric profile, keeps colour output close to true-to-life rather than flattened or oversaturated. Built to Grow With Your Organisation Double-sided printing, the 200-card feeder, encoders, a lamination module, and an LCD screen can all be added later rather than needing to be decided at the point of purchase, and every one of these upgrades installs on-site without needing a specialist visit. So the Primacy 2 is a long-term investment as you can buy for what you need today, and add capability as your requirements change. Security, Chosen to Match Your Requirements The Evolis Primacy 2 card printer is packed full of security features to keep the data and sensitive information you pass through it safe from prying eyes. Kineclipse® masks sensitive data on the ribbon after printing, so nothing readable remains once a job's finished, and digital erasing clears the same data from the printer's own memory automatically. A mechanical key lock protects the inside of the printer, so consumables and any fitted encoders can't be accessed or stolen without it. For cards that need to resist wear and fraud, a YMCKOO ribbon adds a double overlay layer, giving three times the abrasion resistance of a card printed with a standard YMCKO ribbon, and a UV effect can be added via that same ribbon or through the optional lamination module for an extra visible security layer. Encoding Options Magnetic stripe, contact smart card, and contactless encoding are all available, including specific encoder options like Evolis Elyctis Dual and OMNIKEY 5122, so the Primacy 2 can be configured to match whatever access control or ID system your organisation already runs, chosen at purchase or added later. Connectivity, Compatibility, and Everyday Use USB and Ethernet come as standard, with WiFi available as an option, a..

Magicard Pronto ID Card Printer Overview The Magicard Pronto is a compact, hand-fed printer built for small businesses and beginners printing ID cards in low volumes. Card printing with this machine is straightforward enough to set up and run without any specialist training and the free card design software doesn't require a degree in Photoshop to get started.Compatible ribbons: Magicard Pronto ribbons, part of our full range of Magicard printer ribbons. How It Prints The Pronto is a single-sided card printer. It prints a monochrome card in 7 seconds or a full-colour card in 35 seconds. It's direct-to-card print technology allows for edge-to-edge printing on standard PVC CR80 and CR79 cards. It's rewritable too: print the front in full colour, then wipe and reprint the back in monochrome up to 500 times. For visitor passes or temporary badges that change on a daily basis, this is a huge cost saving. Security as Standard Holokote®, Magicard's watermarking technology, comes included with four predefined watermark designs, selectable directly from the printer driver, so every card can carry a visual security watermark at no extra cost. Pair it with HoloPatch cards (which include a highly reflective gold seal that's difficult to replicate convincingly) for an additional layer of security. Software and Compatibility A free copy of EasyBadge Lite comes included, limited to 100 records and Windows only. It connects over USB and runs on Windows 8 and 10 (32 and 64-bit), Windows Server 2012 and 2016, Mac OS 10.9 and above and Linux with CUPS support. Every Pronto is designed and manufactured at Magicard Printers headquarters in Weymouth, UK. Is This the Right ID Card Printer for You? The Pronto handles standard photo ID, membership and visitor cards well. As a direct-to-card printer, it's not the right choice for access control cards with an embedded chip, printing over a raised chip can cause blemishes and force a reissue. For that, the Magicard Ultima retransfer printer is the better fit. But for simple ID cards this is an excellent option. It's easy to use, straightforward to maintain and produces high-quality cards that look great for years. Please note: this printer is supplied without ribbon or blank cards. Add compatible consumables to your order before checking out. Key Features: Direct-to-card, edge-to-edge printing Hand-fed single card feeder Print speeds: 7 seconds monochrome, 35 seconds full colour Rewritable, reuse the back of the card in monochrome up to 500 times HoloKote security watermarking (4 standard designs), optional HoloPatch cards USB connectivity Compatible with Windows 8/10, Windows Server 2012 and 2016, Mac OS 10.9+ and Linux (CUPS) Includes EasyBadge Lite design software (Windows only, 100 record limit) Card thickness: 0.51mm to 1.02mm Dimensions: 233mm (H) x 215mm (W) x 270mm (D) Weight: 4.4kg 2-year MagiCover Limited Warranty (covers 50,0..

Zebra ZC300 ID Card Printer (Double-Sided) Overview The Zebra ZC300 Double-Sided is built for organisations issuing ID cards regularly and at real volume, printing both sides of a card in a single pass rather than needing two runs through the printer.Compatible ribbons: Zebra ZC300 ribbons. Speed and Card Handling This dual-sided model prints up to 450 monochrome cards an hour or 140 in full colour, at 300 dpi edge-to-edge. It prints to CR79 and CR80 cards, in PVC, PVC composite and even adhesive-back or writable-back stock. The feeder adjusts automatically to card thickness and because the input and output hoppers share the same capacity, both empty and refill together rather than one running out before the other. Built-In Security AES data encryption protects card data as it's sent to the printer and advanced host authentication stops unauthorised devices sending print jobs to it over the network. A Kensington lock point on the printer cover protects both the printer and any card stock or rejected cards inside it, so personal information and the printer itself are safe in a public-facing space. Encoding and Connectivity Magnetic stripe encoding (high and low coercivity) and third-party contactless encoding are both available, so the ZC300 can produce access control cards as well as standard photo ID. USB and built-in Ethernet come as standard, with an optional WiFi upgrade if you'd rather avoid running network cables and it's compatible with Windows, Mac and Linux. Day-to-Day Use An LCD interface shows your design and setting changes before you print, cutting out the need for physical test cards. Ribbons load into a cassette rather than needing manual threading, so clearing a jam or fixing a ribbon takes a few seconds rather than stopping production. Saloon-style output doors also make removing printed cards straightforward too. Is This the Right ID Card Printer for You? For standard photo ID, access control, membership and loyalty cards at volume, printed on both sides in one pass, the ZC300 Double-Sided is a strong, well-specified choice. Despite how much technology that's built-in, using this printer day-to-day is simple thanks to the interface. So, if you'd like a printer that can print on both sides of the card, encode access control cards and produce high-quality results, the ZC300 is a really solid choice. Please note: this printer is supplied without ribbon or blank cards. Add compatible consumables to your order before checking out. Key Features: Direct-to-card, dye-sublimation thermal transfer printing, edge-to-edge 300dpi resolution Dual-sided printing: up to 450 monochrome cards/hour, up to 140 full-colour cards/hour Compatible with CR79 and CR80 cards, including PVC, PVC composite, adhesive-back and writable-back stock Automatic card thickness adjustment Matched input and output hopper capacity AES data encryption and host authentication for network s..

IDP Smart-51S Single-Sided ID Card Printer Overview The IDP Smart-51S is a mid-range, single-sided direct-to-card printer built for organisations that issue ID cards regularly and need reliable output without constant operator attention. It suits HR teams, membership clubs, schools, and anyone running a medium-volume card production programme. Print quality and speed that keep pace with your workload The Smart-51S uses dye-sublimation with IDP's Enhanced FINE™ Imaging Technology to produce full-colour photo ID cards at 300 dpi, edge to edge across the full CR80 card face. Monochrome resolution steps up to 600 or 1200 dpi for text, barcodes, and line detail that reads cleanly under a scanner. Speed is where the Smart 51 stands apart from lighter-duty card printers. Full-colour YMCKO cards print at up to 212 cards per hour. Switch to a monochrome ribbon and that rises to 720 cards per hour. That throughput is useful when you need to issue a large run of single-colour access control badges or membership cards quickly. Every card comes out dry and ready to hand over; there is no waiting for inks to cure. The input hopper holds 100 cards with the lid closed and opens to 200, so a sizeable batch runs unattended. The 40-card removable front output hopper keeps finished cards organised, and individual cards can be hand-fed when you only need one or two. Upgrade options and encoding The Smart-51S ships as a single-sided, USB-connected printer. Optional upgrades are all field-installable, so you can add capability as your programme grows rather than buying a new printer. Dual-sided printing. A flipper module converts the 51S to the 51D, printing colour on the front and black on the back in a single pass. If cards also need lamination for daily handling, the IDP Smart 51L is available separately as a ready-configured dual-sided model with the lamination module installed. Ethernet. USB is standard. Ethernet connects the printer to a shared network so multiple users can send jobs without physically accessing the machine. Encoding. Magnetic stripe encoding writes to ISO 7811 tracks for door access and time-and-attendance systems. Contactless smart card encoding covers MIFARE and other ISO 14443 formats for proximity access control cards and contactless passes. Security printing. The SmartMark feature prints a custom visible watermark, which can be text, a logo, or an image of your choice, into the overlay panel at no extra ribbon cost. UV printing adds a covert image to the card that only appears under ultraviolet light. Either feature on its own deters casual copying; both together make a card significantly harder to clone. Please note: This printer is not currently compatible with Windows 11. It supports Windows 7, 8, and 10, plus macOS and Linux. Specification table Specification Detail Print modeSingle-sided (dual-sided via field-upgrade) Print technologyDye-sublimation direct-to-card ..

HiTi CS-200e Single-Sided ID Card Printer Overview The HiTi CS-200e is a direct-to-card dye-sublimation printer built for organisations that print staff ID, visitor passes, student cards and access control credentials in-house. It is compact enough for a desk, straightforward to run and modular enough to grow with your card programme. Print quality and speed The CS-200e uses dye-sublimation for full-colour output and thermal transfer for monochrome, both at 300 dpi continuous tone. Continuous tone means colours blend smoothly across the card surface rather than breaking into visible dots, so photos and gradients look clean at card size. Edge-to-edge printing covers the full CR-80 card face with no white border. A full-colour YMCKO card prints in approximately 21 seconds. Switch to resin black and the CS-200e completes a card in approximately 4.5 seconds, which is useful when you need to issue a large batch of single-colour passes quickly. The YMCKO ribbon yields up to 400 prints per roll; the half-panel YMCKO variant stretches to 560 prints by using shorter panels, which makes sense for cards where the photo only covers part of the card. A resin black ribbon covers 1,000 prints. Card handling and compatibility The printer accepts standard CR-80 cards (53.98 × 85.6 mm) in PVC or polyester with a polished PVC finish, at thicknesses from 0.25 mm to 1.00 mm. The 100-card input hopper keeps the printer running without constant attention, and the 50-card output hopper collects finished cards neatly. The CS-200e connects via USB and runs on Windows 7 or later, including Windows 11, as well as macOS v.10.6 or above. The bundled CardDesiree CS design software is Windows-only. If you are on Windows 11 in S Mode, deactivate S Mode before installing it. Optional encoding and duplex modules Dual-sided printing. An optional flipper module adds automatic two-sided printing. You buy the base printer as a single-sided ID card printer and fit the module when your card design requires a reverse side. Encoding. For access control or smart-card programmes, three encoding modules are available as field-upgradeable additions: a magnetic stripe module (ISO 7811 Hi-Co and Lo-Co), a contact smart card module, and a contactless RFID module covering ISO 14443A/B, ISO 15693, MIFARE and HID iCLASS formats. Each module fits the existing chassis without sending the printer away for modification. High-capacity hopper. An optional 400-card input hopper is also available for higher-volume runs. Ribbons, cards and the bundle option The CS-200e takes its own ribbon format. Plastic-ID stocks the full range of HiTi CS-200e ribbons, including YMCKO full-colour, monochrome black, gold, silver and white options. If you need card stock, plain white PVC cards in CR-80 format are available in 480 and 760 micron packs of 100. If you want to start printing immediately, the HiTi CS-200e bundle ships with the printer, a 400-print YMCKO ribbon, 400 plain white cards and CardE..

Evolis Agilia Retransfer ID Card Printer Overview The Evolis Agilia is a high-performance retransfer ID card printer built for organisations that need production-grade print quality, a range of card types, and the flexibility to add encoding and security features as their needs grow. It is available in single-sided (simplex) and dual-sided configurations. What retransfer technology means for your cards With a direct-to-card printer, the print head touches the card surface directly, which limits both quality and the range of cards you can use. The Agilia works differently. It prints first onto a clear retransfer film, then thermally bonds that film to the card. The result is true edge-to-edge coverage with no white border at the card edge, and the 600 dpi print head renders fine details with genuine sharpness: microtext, guilloches and high-definition QR codes all come out crisp and clean. Because the film conforms to the card surface, the Agilia handles cards that would be problematic for direct-to-card printers: PVC, composite PVC, PET, ABS and PC cards all produce the same clean finish, including chip cards and cards with surface irregularities. Card thickness can range from 30 to 50 mil. Colour profiling is built in, so the printer adjusts output to maintain consistent colour across a run, not just across a single card. Print speed, card handling and throughput Single-sided colour printing (YMCK) runs at up to 150 cards per hour; dual-sided (YMCKK) runs at up to 100 cards per hour. A 200-card input feeder and 100-card output hopper mean the Agilia can handle batch jobs without constant reloading, and a 10-card reject hopper keeps the output tray clear of cards that didn't pass inspection. For on-demand issuance, there is also a manual single-card feed option. Ribbons are automatically recognised as soon as they are inserted, so there is no manual configuration when you change consumables. The YMCK ribbon (RT4F101E100) gives 600 colour prints per roll; the dual-sided YMCKK ribbon (RT5F102E100) also yields 600 prints. The retransfer film (RTCL100NAAA) delivers 1,200 prints per roll. You can order all Agilia consumables directly from the Evolis Agilia ribbons page. Encoding, security and upgradeability The Agilia ships as a print-only unit and can be expanded at any point with factory-fit or field-installed options. Encoding choices include a magnetic stripe encoder (ISO 7811, HiCo/LoCo 3-track), a contact smart card encoder, and a dual contactless encoder covering ISO 14443 A/B, ISO 15693, MIFARE and DESFire, making it a practical choice for printing and encoding access control cards in a single pass. Security features go beyond the card itself. Advanced print elements include UV printing (using the YMCFK ribbon), microtext and guilloche patterns that are difficult to copy. Sensitive data can be erased from the printer's memory after each run. An optional electromechanical lock restricts physical access to the card feeder and rib..

Pointman Nuvia N10 Printer Bundle Overview The Pointman Nuvia N10 is a compact, single-sided, direct-to-card ID card printer for small to medium-sized businesses that need to print a low volume of full-colour ID cards without a large upfront investment. This bundle adds a 200-image YMCKO colour ribbon, 100 blank white PVC cards and CardExchange Go design software, so you have everything ready to start printing on arrival. Specifications Specification Detail Print technologyDirect-to-card dye sublimation / resin thermal transfer Print resolution300 dpi, 16.7 million colours Full-colour print speedUp to 200 cards per hour (YMCKO, single-sided) Monochrome print speedUp to 600 cards per hour Card feedingManual single feed slot (one card at a time) Card formatISO CR80 (85.60 mm × 53.98 mm) Card thickness0.4 mm to 1.2 mm ConnectivityUSB 2.0 and Ethernet (standard) Memory128 MB OS compatibilityWindows (not Mac compatible) Warranty3-year limited What's Included: Pointman Nuvia N10 single-sided card printer Pointman 66200740 full-colour YMCKO ribbon (200 images) 100 blank white PVC cards CardExchange Go software (PC) / CardPresso XXS (Mac) Print quality and speed for a working ID card programme The N10 reproduces photo IDs, logos and colour-coded designs with the sharpness a professional badge demands at 300 dpi for up to 200 full-colour cards per hour. If you only need names, barcodes or numbering in black, switch to a monochrome ribbon and the printer reaches 600 cards per hour. That keeps costs per card low when full colour is not required. Manual card feeding works by loading plastic cards one at a time through the front slot. That keeps the footprint small and the printer lightweight, and it suits any office that issues cards in small batches rather than processing hundreds in a single run. If you need to print on pre-encoded access cards or cards with a magnetic stripe, the manual feed slot lets you control exactly what goes in. The 128 MB of onboard memory handles card designs that mix photos, text and logos without slowing the print cycle down. Connectivity, software and design USB and Ethernet are both standard. You can connect the N10 directly to a single workstation or put it on the network and share it across a team. The bundle includes CardExchange Go, an ID card design and print application that covers everything from basic name badges to more structured card layouts. PC users receive CardExchange Go; Mac users receive CardPresso XXS instead. If you need a more capable design tool with a larger database or advanced workflow features, an IDAssist software upgrade is available at the point of purchase. The N10 runs on Windows only. If your workstation runs macOS, check that the bundled CardPresso XXS meets your requirements before ordering. Warranty, ribbons and ongoing supplies The N10 carries a 3-year ..

Symeyo Printer Overview The Symeyo™ printer is a dedicated label printer for retail and food-service counters. It produces professional price signs and display labels that make your counter look its best and give customers the information they need to buy. It prints double-sided labels in the size your display calls for, and ships with everything you need to start printing on day one. Specifications Specification Detail Print technologyThermal transfer using Symfoil™ foil ribbons (no ink or toner) PrintingDouble-sided InterfaceUSB 2.0, Parallel, RS-232 MemorySDRAM 8 MB, Flash 4 MB Memory expansionSD Card Reader, up to 4 GB Status indicator1 LED (green, amber, red) OS compatibilityWindows, Linux, Mac X.11 Software supportBartender, Nice Label, SAP, Oracle, Microsoft SQL Server External device compatibilityEPOS, weighing scales and more Dimensions213 mm (W) × 188 mm (H) × 314 mm (D) Weight2.8 kg Part number750-2000 What's Included: Symeyo label printer Symeyo Ultra-Lite label design and print software Windows printer driver Printing display labels and price signs The Symeyo™ prints using Symfoil™ foil ribbons. The printhead heats the ribbon and transfers the foil onto the label, so there is no ink or toner involved. When a ribbon runs out, you simply load a new one. Double-sided printing lets you put product information on both faces of a label. You need fewer labels to cover a display run, which saves media and keeps the counter tidy. A single-sided sign can only face one direction. A double-sided label is readable from both sides, so it works well for freestanding shelf-edge displays or hanging tags. Colour and size flexibility means you are not locked into pre-set formats. The print colour comes from the Symfoil™ ribbon you load, so changing colour is as simple as changing the ribbon. Labels can be designed in whatever size your display needs. A bold 90 × 75 mm shelf sign and a compact price tag for a small counter line are both possible, so you can build varied displays that catch the eye. Allergen and compliance labelling is something many food-service businesses use this printer for every day. Counter displays for fresh or prepared food need to show allergen information clearly, and the Symeyo™ lets you include that detail alongside the product name and price without having to outsource the printing. Software, connectivity and integration The printer ships with Symeyo Ultra-Lite label design and print software and a Windows printer driver. Connect via USB 2.0 on day one and start designing and printing immediately, without a separate software purchase. For businesses already running enterprise systems, the Symeyo™ integrates with SAP, Oracle and Microsoft SQL Server, and is compatible with Bartender and Nice Label. It also connects to EPOS terminals and weighing scales, so price labels can draw on live..

FARGO DTC1250e Overview With a printing time of just 16 seconds per card, the HID FARGO DTC1250e is one of the fastest plastic card printers in its class and ideal for schools, small businesses or local government that need high-quality ID cards quickly without a dedicated printing team or complex infrastructure. It arrives ready to produce employee badges, student cards, membership credentials and visitor passes straight out of the box when you order a ribbon with it. The printer ships as single-sided and can be field-upgraded to dual-sided printing and smart card encoding as your programme grows, so you are not locked into a configuration on day one. Specifications Specification Detail Print methodDye sublimation / resin thermal transfer Resolution300 × 300 dpi (standard); 300 × 600 dpi (optimised) Colour depthUp to 16.7 million colours / 256 shades per pixel Print speed (YMCKO)16 seconds per card / 225 cards per hour Print speed (YMCKOK, dual-sided)24 seconds per card Print speed (monochrome K)6 seconds per card Print speed (KO)8 seconds per card Print areaEdge-to-edge Accepted card sizesCR-80 (85.6 × 54 mm); CR-79 adhesive back Accepted card thickness9 to 40 mil (0.23 to 1.02 mm) Accepted card typesPVC; polyester with polished PVC finish; optical memory cards with PVC finish; rewritable Input hopper100 cards Output hopper30 cards as standard; up to 100 cards (optional) Memory32 MB RAM ConnectivityUSB 2.0 standard; Ethernet with internal print server (optional) OS compatibilityWindows 7, 8, 10; Linux Data protectionAES-256-GCM encryption; Resin Scramble option Included softwareSwift ID embedded badging application; FARGO Workbench diagnostic utility with Color Assist spot-colour matching Dimensions (single-sided)224 mm H × 348 mm W × 201 mm D Dimensions (dual-sided)249 mm H × 475 mm W × 234 mm D Weight3.4 kg (single-sided); 4.54 kg (dual-sided) Power supply100 to 240 V AC, 50 to 60 Hz, 1.6 A max EnvironmentalGreenCircle Certified; ENERGY STAR qualified (base models without encoders) Warranty3 years (printer and printhead); unlimited printhead pass with UltraCard What's Included: Power supply and mains cord USB cable Input and output card hoppers Driver installation disc and guide Swift ID embedded badging software FARGO Workbench diagnostic utility with Color Assist Print speed and card output for working programmes The DTC1250e prints a full-colour single-sided card in 16 seconds, making it one of the fastest card printers in its class. That works out to 225 full-colour cards an hour. If you print monochrome only, the speed rises to 6 seconds a card, giving you up to 600 cards an hour for plain text or barcode passes. The 30-card output hopper suits a typical on-demand or registration-desk printing environment rather than bulk overnight runs..

CX ECP-XL Event Card Printer Overview Standard CR80 cards from an ID card printer are simply too small to carry a photograph, a name, an access tier, branding and a QR code at a size people can read from a distance. Large-scale events, festivals, sporting events, trade shows and conferences can solve this by issuing oversized pre-printed XXL cards that are personalised on the spot. The CX ECP-XL is the Cards-X event card printer built specifically for that workflow. It takes wide pre-printed stock that your supplier or in-house team designs in advance, then prints the variable data (name, photo, barcode, access level) at pace, directly at the accreditation desk. Specifications Specification Detail Print technologyDye sublimation / resin thermal transfer Resolution300 dpi Full-colour print speedUp to 180 cards/hour (YMCKO) Monochrome print speedUp to 1,400 cards/hour Card formats accepted88 × 124 mm or 88 × 140 mm (pre-printed XXL) Printable area54 × 86 mm (CR80-equivalent zone) Printing positionsThree selectable positions on card Double-sided printingYes (manual card rotation) Card thickness0.25 mm to 1.0 mm Input hopper100 cards (0.76 mm stock) Output stacker50 cards ConnectivityUSB (standard); Ethernet (optional) EncodingContactless RFID and UHF (optional inline module) OS compatibilityWindows and macOS Dimensions (L × W × H)354 mm × 198 mm × 204 mm Weight5.2 kg Warranty2 years SKU / MPNECP-XL Cards-X product code12185 What's Included: CX ECP-XL event card printer USB cable Plug-and-play driver for Windows and macOS 2-year manufacturer's warranty Please note: the printer is not supplied with a ribbon. Add the compatible YMCKO or monochrome ribbon separately when ordering. Card formats and the pre-printed workflow The ECP-XL accepts pre-printed XXL cards in two sizes: 88 × 124 mm and 88 × 140 mm. Submit your card design to your event card supplier, who prints the background design, branding, event logo, colour zones and access tiers in advance. You load the blanks into the 100-card input hopper and the printer adds the variable data in a CR80-equivalent print zone of 54 × 86 mm. Three selectable printing positions let you place that zone at the top, centre or bottom of the card, so your pre-printed design determines where the personalisation lands. If you need content on both faces, you can rotate the card by hand and run it through a second time. The accepted thickness range of 0.25 mm to 1.0 mm covers standard PVC event stock and heavier composite cards commonly used for oversized cards to give them more rigidity. If the badge also needs to control access to backstage zones, media areas or VIP spaces, the optional inline contactless encoding module encodes an RFID or UHF chip during the same print pass. That keeps the accreditation process to a single step rather than two..

Zebra ZC10L Large Format Card Printer Overview The Zebra ZC10L is built for event pass printing at conferences, conventions and concerts. It prints full-colour, edge-to-edge PVC badges at 140 × 88mm in a single pass, so every card can be personalised on the spot, right up to the moment of an event. Conference organisers, event managers, venue operators and security teams responsible for accreditation use it where on-demand, high-visibility credentials matter. Specifications Specification Detail Part numberZC10L-00QT0US00 Print technologyDirect-to-card dye diffusion Print resolution300 dpi Colour print speedUp to 195 cards/hour (YMCO, single-sided) Monochrome print speed360 to 410 cards/hour Input hopper200 cards (24 mil) Output hopper70 cards Card size140 × 88mm (5.5″ × 3.46″) Card thickness24 mil Card materialPVC ConnectivityUSB standard; Ethernet via external print server (optional) Memory64 MB Smart card encodingHF, UHF, Dual HF/UHF (optional) Included softwareZebra CardStudio 2.0 (30-day trial) OS compatibilityWindows 7, 8.1, 10 Dimensions (H × W × D)290 × 278 × 485mm Weight21 kg Warranty1 year What's Included: Zebra ZC10L large format card printer USB cable Power cord Output tray Cleaning roller Zebra CardStudio 2.0 (30-day trial) Print quality and large-format badge design At 140 × 88mm, a badge from the ZC10L printer has more than twice the surface area of a standard ID card. Staff can read names, access tiers and photographs from across a reception desk or venue entrance without needing to lean in. The ZC10L uses 300 dpi dye diffusion printing, derived from photo printer technology. This means that background graphics, sponsor logos and portrait photos reproduce with the kind of richness and sharpness that makes a badge look intentional rather than functional. Colour printing uses a YMCO 4-panel ribbon and covers the full face of the card edge to edge in one pass, with no border and no blank margin. No other large-format direct-to-card printer achieves full bleed in a single printing process. Monochrome printing uses a separate black ribbon and runs at up to 410 cards per hour. Guest names, QR codes and barcodes can be added to a pre-coloured card quickly and at high quality for easy scanning. Ribbon authentication uses RFID technology built into each ribbon roll, so the printer auto-senses the ribbon type and tracks remaining capacity. The 200-card input hopper means you can load a full batch and step away. The 70-card output hopper holds most of a print run without needing constant attention. At up to 195 full-colour badges per hour, a list of 400 guests takes just over two hours to print, with a single hopper reload halfway through. Software, connectivity and card design Card design software is critical for large-format badges because the 140 × 88mm template ..

IDP Smart 51D Dual-Sided ID Card Printer Overview Teams producing staff badges, student IDs, membership cards or access control badges on a single-sided printer have to flip and re-feed every card by hand. The IDP Smart 51D removes that step entirely. Its built-in flipper module handles front-and-back printing automatically in a single pass, so your team loads cards once and collects finished, two-sided credentials from the output hopper. It is IDP Corporation's mid-range ID card printer platform, built on the proven Smart 51 series, and it suits teams running regular batches rather than the occasional one-off double-sided card. Specifications Specification Detail Part numberIDP-651303 Print methodDirect dye-sublimation, direct-to-card (DTC) Print modeDual-sided (automatic, via flipper module) Resolution300 dpi colour & mono; 600 & 1,200 dpi mono only Print speed (YMCKO)212 cards/hour Print speed (YMCKOK dual-sided)164 cards/hour Print speed (monochrome)720 cards/hour Print areaEdge-to-edge Card sizeISO CR80 (CR79 factory option) Card thickness15 to 40 mil (0.38 to 1.0 mm) Card typesPVC, PET, Composite PVC Input hopper100 cards (200 with cover open) Output hopper40 cards front (optional 100-card rear stacker) ConnectivityUSB standard; Ethernet optional; Wi-Fi optional OS compatibilityWindows, macOS, Linux Display2-line LCD, 2 LED buttons Memory64 MB RAM Encoding optionsMagnetic stripe, contact smart card, contactless smart card (all optional) Dimensions165 × 498 × 210 mm Power48 W, free voltage (AC 100/220 V, 50 to 60 Hz) CertificationsCB, CE, FCC, KC, CCC Warranty5 years (printer); 2 years (printhead) What's Included: IDP Smart 51D dual-sided printer USB cable Power cord CD with printer drivers, manuals and utility programmes Quick install guide Print quality, speed and the metal frame behind it The Smart 51D's durable metal frame reduces vibration during printing. That matters because precise ribbon movement is what keeps colour gradients smooth and text edges sharp on a direct-to-card printer. IDP's FINE™ Imaging Technology and a new high-performance CPU optimise that ribbon movement together. So cards come out consistently across an entire batch rather than drifting in quality as the hopper empties. Print speeds are 212 full-colour cards per hour in single-sided mode (YMCKO ribbon) and 164 dual-sided colour cards per hour (YMCKOK ribbon). Monochrome-only jobs reach 720 cards per hour. At those rates, a school issuing 500 dual-sided student IDs can complete the run in around three hours. The input hopper holds 100 cards and extends to 200 when you open the cover, so longer runs don't require constant reloading. Resolution is 300 dpi for both colour and monochrome work. For mono-only jobs where fine text or barcodes need to be razor-sharp, 600 and ..

Matica XL8300 XL Card Printer Overview Event and visitor credentials carry a lot of information. A standard CR80 card runs out of room fast when you need a photo, name, role, access tier, event branding and a QR code all at a size that reads from a distance. The Matica XL8300 prints on oversized 124mm × 85.6mm cards, a format more than twice the area of a credit card. Event teams, security managers and accreditation teams get the print space to put everything on a single pass without compromising legibility or design. Specifications Specification Detail Part number (Plastic-ID)37-1000 Manufacturer part numberPR000316 Print technologyDye-sublimation retransfer Print resolution300 dpi Print speed (colour)Up to 85 cards per hour Print speed (monochrome)Up to 128 cards per hour Print modeSingle-sided Card format124mm × 86mm (4.88″ × 3.37″) Card thickness0.25mm to 1.02mm (hopper adjustment required) Card materialsPVC, ABS, PET Input hopper capacity100 cards (0.76mm) Output hopper capacity100 cards (0.76mm) ConnectivityUSB 2.0 and Ethernet OS compatibilityWindows 7, 8, 10, 11 (32 & 64-bit) Dimensions (W × D × H, incl. feeder and hopper)549 × 322 × 411mm Weight15.6kg Warranty36 months; lifetime printhead warranty using EDIsecure® materials Security optionsUV printing; optional contactless encoding (MIFARE, DESFire, HID iClass) Ribbon includedNo What's Included: Matica XL8300 printer Power supply USB cable Empty ribbon cartridge Empty retransfer film cartridge User manual Print quality, speed and card format for a working event programme The XL8300 is built on Matica’s established XID print engine. It shares the proven retransfer technology of the XID8300, re-engineered with a wider print head and transport mechanism to handle the oversized card format. Retransfer printing puts the image onto a clear transfer film first, then bonds that film onto the card surface. The result is an edge-to-edge, photo-quality finish at 300 dpi that holds up across PVC, ABS and PET card materials. In colour mode, the XL8300 prints up to 85 cards per hour. Monochrome output reaches 128 cards per hour. The 100-card input and output hoppers keep a production run moving, so accreditation teams can print in batches without stopping to reload against a hard deadline. Each oversized card carries two printable CR80-sized areas. The XL8300’s firmware manages this automatically, giving designers a large, flexible canvas for photos, logos, access tiers and barcodes without manual intervention. The printer’s metal chassis is built for the demands of a multi-day event. It fits on a standard desk, so you can set it up on-site at a registration desk, security gate or production office and issue badges as delegates and crew arrive. Card security: UV printing and contactless encoding UV printing is availa..

Pointman Nuvia N25 Printer Bundle Overview The Pointman Nuvia N25 is supplied dual-sided as standard in this bundle, so there is no additional configuration to arrange before you can print your first double-sided card. The bundle pairs the printer with a genuine Pointman YMCKO ribbon, 200 blank cards and entry-level design software. HR teams, training providers, security companies, membership organisations and corporate reception desks get everything required to begin producing professional ID cards in-house from day one. Specifications Specification Detail SKUP-POI-PR-PM-N25-BUN Print technologyDirect-to-card dye-sublimation / resin thermal transfer Print resolution300 dpi Full-colour print speedUp to 200 cards per hour Monochrome print speedUp to 600 cards per hour Print capabilityDual-sided Input hopper100 cards Output hopper50 cards ConnectivityUSB and Ethernet Card formatISO CR80 (85.6 × 54 mm) Card thickness0.4 mm to 1.2 mm OS compatibilityWindows (not Mac compatible) Warranty3-year limited What's Included: Pointman Nuvia N25 dual-sided ID card printer Pointman 66200740 full-colour YMCKO ribbon (200 prints) 200 blank white PVC cards CardExchange Go design software (PC) Print quality, speed and what the N25 handles day to day The N25 prints using direct-to-card dye-sublimation at 300 dpi. Colour and photographic detail go directly onto the card surface for a sharp, professional finish. At up to 200 full-colour cards per hour, it suits runs of dozens or hundreds of cards without the printer becoming a bottleneck. The included YMCKO ribbon (yellow, magenta, cyan, black and overlay) delivers a full-colour side with a protective clear overlay on every card. The N25 also supports the optional YMCKOK ribbon (yellow, magenta, cyan, black, overlay, and a second black panel). It prints a full-colour front and a black-only back from a single pass, which suits ID programmes that need names, job titles or barcodes printed in black on the reverse. The monochrome print speed of up to 600 cards per hour applies when printing with a black-only ribbon. The 100-card input hopper feeds cards automatically, so you can load a full batch and walk away. Finished cards collect in the 50-card output hopper. USB and Ethernet connectivity mean the printer can sit on a network rather than tethered to a single workstation, which suits shared offices, reception desks and distributed HR teams. Software: PC users receive CardExchange Go, an entry-level design tool suited to straightforward ID card templates. If your programme requires a database connection, larger record sets or more complex card designs, a software upgrade to IDAssist is available to select before you complete your purchase. Important: The Pointman Nuvia N25 is not currently compatible with macOS. Windows users can connect and print without additional configurat..

Zebra ZC300 ID Card Printer Bundle Overview Organisations that issue ID cards in-house on a regular basis need a printer that handles the whole job reliably. That means photo-quality colour printing at real throughput, a card feeder that doesn’t need babysitting, and security controls that hold up when the printer sits somewhere other than a locked office. The Zebra ZC300 card printer is built for that workload, and this bundle gives you everything to start printing on day one. It suits HR teams, schools, healthcare facilities and security-conscious businesses printing medium volumes of staff ID cards, visitor passes, membership cards or access control credentials. Specifications Specification Detail Part number33-1060-BUN Print technologyDye-sublimation thermal transfer, direct-to-card Print resolution300 dpi (11.8 dots/mm) Single-sided print speed (full colour)200 cards per hour Single-sided print speed (monochrome)900 cards per hour Print areaEdge-to-edge on CR-80 media Input hopper100 cards (auto-adjusting, 30 mil / 0.76mm) Output hopper100 cards Card sizesCR80 ISO 7810 ID-1 format, CR79 Card thickness10 to 40 mil Card materialsPVC, PVC composite, adhesive-back, writable-back ConnectivityUSB 2.0 and Ethernet 10/100 Memory2 GB flash Image size1006 × 640 pixels DisplayGraphical colour LCD with tricolour status indicators SecurityAES data encryption, printer host authentication, Kensington lock slot Encoding optionsField-upgradeable: magnetic stripe (ISO HiCo/LoCo), contactless (MIFARE) OS compatibilityWindows, macOS, Linux Dimensions (single-sided)258mm H × 157mm W × 383mm D Weight4.0 kg WarrantyThree-year limited warranty on printer and printhead What's Included: Zebra ZC300 single-sided ID card printer (ZC31-000C000EM00) CardStudio 2.0 Standard physical licence key 200 blank white PVC cards Zebra YMCKO full-colour ribbon (200 prints) Print quality and speed for a working card programme The ZC300 prints at 300 dpi with edge-to-edge coverage. That gives you crisp text, accurate barcodes and photo-quality colour on standard CR-80 PVC cards. It uses dye-sublimation thermal transfer technology, printing directly onto the card surface for consistent, vibrant results across a full batch. The print speeds make it viable for regular production runs. At 200 full-colour cards per hour single-sided, it handles a typical staff-onboarding batch without tying up a desk for hours. The 900 cards per hour monochrome speed suits high-volume runs of visitor passes or single-colour ID cards where throughput matters more than colour. The 100-card input and output hoppers handle a full batch without reloading mid-run. The card feeder automatically adjusts to the thickness of each card up to 40 mil, so switching between standard 30 mil PVC cards and thicker composite stock requires no ..

Swiftpro K30 Retransfer ID Card Printer Overview Cards that carry access credentials, smart chips or detailed security print need a retransfer printer. The chip or antenna sits slightly proud of the card surface, and a printhead moving across it can leave a blemish on the card. Retransfer printing solves this by printing the image onto a clear film first, then fusing that film onto the card. The result is a clean, edge-to-edge finish regardless of surface irregularities. The Swiftpro K30 retransfer ID card printer prints single-sided as standard, with a double-sided upgrade available, at 300dpi and up to 120 full colour cards per hour. It suits corporate ID programmes, healthcare trusts, universities and any organisation that issues smart access cards in volume and needs the print quality and data security to match. Specifications Specification Detail Part numberP-SP-7710006148 Print technologyDye sublimation retransfer Print resolution300dpi × 300dpi Print speed (single-sided, YMCK)30 sec/card, approx. 120 cards/hour Print speed (double-sided, YMCKK)56 sec/card, approx. 64 cards/hour Print capabilitySingle-sided standard; double-sided upgrade available Print areaOver-the-edge (full bleed, no white border) Card sizeISO CR80: 54.0mm × 85.6mm Card thickness0.25mm to 1.00mm Card typesPVC, PET, ABS, polycarbonate, composite PVC, contact and contactless smart cards Input hopper100 cards (optional 250-card upgrade) Output hopper100 cards ConnectivityUSB 2.0, Ethernet (100BASE-TX / 10BASE-T) Operating systemsWindows 7 (SP1), 8/8.1, 10, 11 (32-bit and 64-bit); Server 2008 R2, Server 2012 Security featuresPatented ribbon erase function; IPSec (IPv6/IPv4) encryption; electronic lock for input hopper and supplies door Encoding options (optional)Smart card contact and contactless (iClass, MIFARE, DESFire, FeliCa) Warranty3-year printer warranty; lifetime printhead warranty Software includedEasyBadge Lite (worth £80) Dimensions (W × H × D, excl. stacker)343mm × 335mm × 322mm Weight13.5kg Operating temperature15°C to 30°C Operating humidity35% to 70% (non-condensing) What's Included: Power cord with power supply USB 2.0 / Ethernet cable Cleaning card Printer driver CD Quick install guide Bend remedy (card flattener) EasyBadge Lite card design software Retransfer printing and what it means for your cards The K30 uses dye sublimation retransfer printing. The colour image is printed in reverse onto a clear retransfer film. That film is then heat-fused onto the card surface. Every card comes out with true edge-to-edge coverage and no white border at the card edge. Why it matters for smart cards. On a card with an embedded chip or contactless antenna wire, the raised surface can cause a direct-to-card printhead to skip slightly, leaving a mark. Because the K30 prints to ..

FARGO DTC4250e ID Card Printer Overview The FARGO® DTC4250e is a direct-to-card ID card printer built for medium-volume card programmes in businesses, schools and local government where a single desktop unit needs to handle both full-colour photo ID and optional technology card encoding. It suits operations that issue employee badges, student cards, membership credentials and access control cards regularly enough to need a dependable workhorse, but not in the kind of volume that demands industrial equipment. What sets the DTC4250e apart within the HID FARGO range is its modular design: encoding capability, dual-sided printing and an expanded input hopper can all be added in the field as your programme grows, so you’re not locked into a fixed specification from day one. Specifications Specification Detail Part number (Plastic-ID)31-2046 Manufacturer part number052000 Print technologyDye-sublimation / resin thermal transfer Resolution300 dpi (11.8 dots/mm), continuous tone Colour depthUp to 16.7 million colours / 256 shades per pixel Print speed, YMCKO (full colour)16 seconds per card Print speed, YMCKOK (dual-sided)24 seconds per card Print speed, K (monochrome)6 seconds per card Card sizesCR-80 (85.6 × 54 mm), CR-79 adhesive back Card thickness9 to 40 mil (0.23 to 1.02 mm) Input hopper capacity100 cards (standard); 200 cards with optional dual-input hopper Output hopper capacity100 cards ConnectivityUSB 2.0 and Ethernet with internal print server Software includedSwift ID embedded badging app, FARGO Workbench diagnostic utility with Color Assist spot-colour matching Compatible card personalisation softwareAsure ID Data securityAES-256 encryption, password protection Security optionsFluorescent panel printing (optional); UV overlay (optional) Power supply100 to 240 VAC, 50 to 60 Hz, 1.6 A Dimensions (single-sided)249 mm H × 460 mm W × 234 mm D Weight (single-sided)4.1 kg Warranty3 years (printer and printhead) What’s Included: DTC4250e single-sided printer USB 2.0 cable US/EU power cords Software installation CD with printer driver and user guide Warranty documentation Print quality and speed for a working card programme The DTC4250e prints a full-colour YMCKO card in 16 seconds. For operations that produce employee badges or student cards in batches, that translates to roughly 225 cards per hour. Monochrome runs are considerably faster at 6 seconds per card, which suits visitor passes, membership cards and any job where a single-colour design gets the work done. Print resolution sits at 300 dpi with continuous tone output, so photos, logos and barcode graphics all come out cleanly at card size. The Color Assist tool inside FARGO Workbench handles spot-colour matching, which is useful when a company logo needs to print accurately against a specific brand colour...

Entrust Sigma DS1 Simplex ID Card Printer For encoding options, please contact us. The Entrust Datacard Sigma DS1 printer is designed to fit in with today’s commonly used cloud-based environment. With flexible scalability allowing growth and additions, this ID card printer is easy to use and offers high-level security features. You can print on demand with your mobile device. Ribbons for the Sigma DS1 are listed under Datacard ribbons. Built for ease of use, the Sigma DS1 ID card printer features a simple mobile dashboard so you can view the printer’s status and cleaning status, see whether you need to order supplies, update the firmware or get help. You can also scan a QR code to access how-to videos and other helpful resources.  With pre-loaded ribbon cassettes, changing the ribbon in the Entrust Datacard Sigma DS1 ID card printer couldn’t be easier. You can also customise the LCD ring light with your brand’s colours to fit in with your environment.  Featuring a secure process that prevents the printer’s internal system from being infected by malware or computer viruses, the Sigma DS1 also internally manages its own keys and certificates. All data is securely encrypted and discarded after the print job has finished, meaning all your sensitive information is kept safe.  There are also other available security features, such as luster printing, which can also be used for creative effect.  For true flexibility, the Sigma DS1 allows for full scalability at any point. Expand your company’s identity credentials at any time by adding smart card capabilities, wi-fi connectivity and much more.  Features  Dye sublimation print technology  Full colour, single-sided printing  Prints up to 175 cards per hour  300dpi resolution  USB connectivity  125 card input hopper capacity ..

FARGO HDP6600 Retransfer ID Card Printer The HID FARGO HDP6600 is a high-definition retransfer printer built for organisations that need sharp, durable cards in volume, such as government departments, hospitals, universities and large employers. It prints at 600 dpi, so fine text and detailed photos stay crisp.Compatible ribbons: FARGO HDP6600 printer ribbons, part of our full range of FARGO printer ribbons. Why retransfer? Instead of printing straight onto the card, the HDP6600 prints onto a clear film and then fuses that film to the card surface. The result is true edge-to-edge printing with no white border, richer colour and a tougher finish. It also prints cleanly over the uneven surface of smart cards and proximity cards. Key features 600 dpi high-definition retransfer printing Single-sided as standard, with a double-sided option Up to 230 single-sided cards per hour 100-card input hopper and 200-card output hopper iON™ technology for a fast warm-up USB and Ethernet connectivity, Windows compatible Choose single or double-sided above. If you need encoding options or help planning a card scheme, contact our team...

The 2XL 2.0 card printer for oversized cards is a successful development and can offer a variety of new features that make working with it even faster, easier and more efficient. With the 2XL 2.0 card printer, the third generation of the overprint card printers will be launched, and the new 2XL 2.0 card printer will now also feature improved plug and play drivers for Windows and Mac, as well as the proven sublimation printing technology that ensures excellent print quality for your plastic cards. There is also a standard USB port and an improved display for even simpler operation. The usual strengths of the XXL 2.0 printer are retained, especially its high printing speed, which allows you to print up to 180 color cards per hour or even an incredible 1,400 cards per hour in monochrome printing! And this performance miracle is also extremely quiet. With the 2XL 2.0 card printer, you have many options for printing large plastic cards: The pre-printed XXL cards are available in the sizes 124 x 88 mm or 140 x 88 mm. The customizable print is in the size of a credit card. Three possible positioning options are available for your individual content: center position, edge position at the bottom and edge position at the top. For double-sided printing, you have additional options. In addition, you can also provide these oversized cards with encoding for a contactless chip in the same operation. Large format credentials for sports tournaments, concerts or many other events can be designed simply and professionally with the 2XL 2.0 card printer. Within a short time, you can equip all visitors of your events with high-quality and practical oversized credentials, thus optimally combining security and marketing!..

The 2XL+ - the Accreditation Printer Ideal for creating personalised event passes, badges and accreditation Easy to use 5 print positions It's fast!  Up to 180 for full colours or 1400 monochrome cards per hourInput feeder holds 100 cards, output hopper holds 50 Print on two card sizes: 124.8 x 88 mm, 140.0 x 88 mm 300dpi dye-sublimation/thermal printing Compact and lightweight (5.2 kgs) Plug-and-play driver for Windows and Mac Standard USB Option for contactless chip encoding Two Year Warranty The 2XL+ brings large performance for large-size cards! The 2XL+ card printer uses dye sublimation and thermal printing to create professional events and oversized ID cards for international events such as sporting events, concerts, and fairs. Its ideal for producing passes, including VIP and backstage passes and official accreditation for performers, participants and organisers. The 2XL+’s fast print speed, low noise level, compact and lightweight design and ease of use make it the ideal events printer. Printing up to pre-printed 180 cards per hour in full colour or 1,400 monochrome cards per hour, on-site personalisation of passes is now a real possibility. The 2XL+ is also extremely economical, being among the least expensive in its class.  Two sizes of pre-printed cards can be used in the 2XL+ printer, and with five selectable printing positions, this gives great flexibility to the overall design of the cards. Furthermore, if contactless chip encoding is required, this can also be done using this printer.   2XL+ Technical Specifications Printing Technology: Dye Sublimation/Thermal Transfer Interface: USB 1.1 (compatible with USB 2.0) Ribbons: Five segment colour ribbons (YMCKO) for printing 200 card sides. Monochrome black ribbon (K) for printing 2000 card sides. Further monochrome ribbons with the colours: white, blue, red, green, silver, and gold. Print Quality: 300 dpi Speed: 180 cards per hour (YMCKO) 1400 cards per hour (Monochrome) Card Formats: 124mm x 88mm (4.88inch x 3.46inch) 140mm x 88mm (5.51inch x 3.46inch) Card Thickness: From 0.25mm to 1.0mm (10mil~40mil) Feeder: 100 cards (0.76mm / 30mil thickness) Output Hopper: 50 cards (0.76mm / 30mil thickness) Operating Systems: Windows 2000, XP, Vista, Windows 7 (32/64-bit), Windows 8 (32/64-bit), Mac OS 10.5-10.8 Dimensions (without feeder and hopper): 197.8mm (Width) x 354mm (Length) x 204 mm (Height) Encoding Options: Contactless (RFID) encoder module Further Options: Network Connection Weight: 5.2 kg / 11.4 lbs (options not included) Warranty: 2 years Please note printers are not supplied with a ribbon, so don't forget to add one to your cart...

CX ECP-CR100 Event Card Printer (Single-Sided) The CX ECP-CR100 Event Card Printer is a high-quality printer designed to create professional and stylish cards and passes in oversized format for medium to large sized events. This printer supports card dimensions up to 98mm (L) x 67mm (W) with a print area of 86mm (L) x 54mm (W).  Capable of printing up to 180 full-colour cards per hour and 1,400 monochrome cards per hour, this printer allows you to quickly speed up your production process when in high-pressure environments. Its 300dpi resolution and thermal dye sublimation print technology ensures vibrant and high-quality designs with every print. Easily customise your cards with text, company branding, barcodes, and more to offer a personalised experience for your event attendees. Top Features: Input hopper holds 100 cards / Output hopper holds 50 cards (0.76mm thickness) Plug-and-play driver for oversized cardsCard thickness compatibility: 0.25mm to 1.0mm Compatible with CR100 cards Works with both Windows and macOS Dimensions: 354mm (L) x 198mm (W) x 204mm (H)Weight: 5.2kg (11.4lbs) 2-year warranty  ..

CX ECP-XT Event Card Printer (Single Sided) Featuring dye-sublimation technology, this card printer utilises heat and pressure to transfer your designs onto the surface of the card. It is designed to print extra-long oversized cards that can be used as event passes or badges.  With a full colour print speed of 180 full colour cards and 1400 monochrome cards per hour, it has never been easier to quickly improve your production. The 300dpi resolution ensures you get the highest quality prints every time.  Offering card sizes up to 54mm x 140mm long, you can personalise your cards specifically to your requirements.  Top Features: •    Input Hopper of 100 / Output Hopper of 50 (0.75 Card Thickness) •    180 Full-Colour Cards Per Hour •    1400 Monochrome Cards Per Hour •    Dimensions: 354mm L X 198mm X 204mm H •    ID Card Printer / Event Card Printer •    Compatible Drivers: Windows 7-11, MacOS If you require any further help / support, please don't hesitate to contact us!..