Blank Plastic Cards & Blank ID Cards

These 125kHz proximity cards are read/writable and supplied unprogrammed, so they can be encoded to suit your own access control system.Each card is made from 85% recycled plastic finished with a PVC laminate overlay. They are standard CR80 size at 760 micron thick with a blank white surface.The cards print on desktop ID card printers, letting you produce staff ID, membership or loyalty cards that double as contactless access credentials while cutting down on new plastic.125kHz proximity, read/writableSupplied unprogrammed85% recycled plastic with a PVC laminate overlayCR80 size, 760 micronBlank white, printablePack of 100 cardsWant to check these will work with your readers? Email sales@plastic-id.com with your system details and we will help...

These 692-500 compatible proximity cards work alongside the 692-500 cards you already use. Each card is encoded with its own unique 8-digit number, so every card on your system can be identified individually.Entry is contactless at 125kHz, giving staff quick and simple access every time they present the card to a reader.The cards are standard CR80 size (86 x 54mm) at 760 micron thickness, manufactured to ISO standards. They print on any desktop ID card printer in full colour or monochrome, so you can add photos, names and company branding to turn them into staff ID cards.They are supplied shrink-wrapped in packs of 10.Compatible with existing 692-500 cards125kHz proximity technologyUnique 8-digit number on every cardCR80, 86 x 54mm, 760 micronPrintable on all desktop ID card printersPack of 10 cards..

These Prox ISO-B compatible cards use 125kHz proximity technology, with a read range of up to 8cm from the reader.At 760 micron thick, the cards are suitable for printing on an ID card printer. A photograph, name or logo can go on the face so one card acts as both ID badge and access credential.The cards are PVC, which is not widely recycled in the UK. When they reach the end of their life, take them to your local recycling centre rather than putting them in household recycling.Prox ISO-B compatible125kHz proximityRead range up to 8cm760 micron, printablePack of 100 cardsWant to check these will work with your readers? Email sales@plastic-id.com with your system details and we will help...

FOTODEK® White PVC Cards with Landscape Slot Punch Premium FOTODEK® white PVC cards with a slot punched at the centre of the long edge, so the finished card hangs in landscape format from a lanyard, badge clip or strap. They are a quick way to produce staff ID, visitor passes, event badges and membership cards without punching cards by hand after printing. The super-smooth print surface gives crisp text and vibrant colour from any standard desktop ID card printer. Made from 100% PVC at 760 micron, they are tougher than laminated or composite card and stand up to daily wear. Specification Manufacturer part number: WF76-AI-SL Size: CR80 (86mm x 54mm), 760 micron Slot punch: centre of the long edge for landscape wear Material: 100% PVC, plain white Pack size: 100 cards Need portrait cards or a different hole position? Get in touch and we will point you to the right card...

These blank white PVC cards carry a contactless Hitag 2 chip running at 125kHz, for access control and time and attendance systems that read Hitag 2 credentials.The chip has 256 bits of EEPROM memory. Each card is ISO CR80 size, 86 x 54 x 0.76mm, the same as a credit card, with a glossy laminated finish.The surface is made for printing. Thermal transfer, dye sublimation and retransfer ID card printers all print onto these cards, turning a blank into a finished photo ID card in one pass.Sold in packs of 100. The cards are PVC, which is not commonly recycled in the UK. Please take them to your local recycling centre rather than putting them in household recycling.Hitag 2 chip, 125kHz256-bit EEPROMCR80, 86 x 54 x 0.76mmGlossy white, printable both sidesPack of 100 cards..

Genuine NXP MIFARE Classic EV1 cards with 4K of memory, made from a minimum of 85% recycled plastic. The embedded chip operates at 13.56MHz, giving quick contactless entry at your card readers.The 4K memory leaves space for larger amounts of data. Encode the cards to control who can enter your premises. They can also be used for membership and loyalty schemes.The blank white surface prints on desktop ID card printers using monochrome or full colour ribbons, so you can add a logo, names or photographs to each card.Genuine NXP MIFARE Classic EV1 chip4K memory13.56MHz contactless frequencyAt least 85% recycled plasticPrintable blank white surfacePack of 100 cardsWant to check these will work with your readers? Email sales@plastic-id.com with your system details and we will help...

Olix White Slimline Proximity Cards with Slot (10 Pack)Manufacturer: OlixManufacturers part number: AAPROXCARDPack Size: 10Technology: EMFrequency: 125 kHzAbout the White slimline proximity cards with a punched slotPack of 10Slimline (not ISO thickness) with a punched slot for a lanyard or clipPrinted number on each cardEM chipset, 125 kHzNon-printableFor use with EM 125 kHz proximity access control readers, including Advanced Access (AAProx) systems...

Olix White PVC ISO Proximity Cards (10 Pack)Manufacturer: OlixManufacturers part number: AAPROXISOCARDPack Size: 10Technology: EMFrequency: 125 kHzAbout the White PVC ISO proximity cardsPack of 10ISO thickness - printable in an ID card printerEM format, 125 kHzCompatible with Advanced Access (AAProx) EM systemsFor use with EM 125 kHz proximity access control readers, including Advanced Access (AAProx) systems...

These P20DYE compatible cards work at 125kHz alongside the P20DYE cards you already use. They arrive pre-programmed, so you only need to enrol each card onto your system before issuing it.Every card carries a printed number that matches its encoding, which makes it simple to record which card has gone to which person.The cards are ISO credit card size, 85.7 x 54mm, with a surface that takes print from ID card printers. Add photographs, names or branding to produce staff ID cards that also give access through your doors.Compatible with P20DYE125kHz proximityPre-programmed, numbered to match the encodingISO size, printablePack of 50 cardsWant to check these will work with your readers? Email sales@plastic-id.com with your system details and we will help...

These contactless cards are compatible with PCM01KB cards. Each one carries an NXP MIFARE 1K chip that can be programmed so your staff can open doors and reach restricted areas of the building.The cards are made from 85% recycled plastic, giving you a lower impact choice for access control. With 1K of memory they are also suited to membership or loyalty schemes.The blank white face can be personalised with photographs, text or company branding, so a single card can serve as both photo ID and door credential.Compatible with PCM01KBNXP MIFARE 1K chip85% recycled plasticCR80 size, 86 x 54mmBlank white, contactlessPack of 100 cardsWant to check these will work with your readers? Email sales@plastic-id.com with your system details and we will help...

These blank white contactless cards run at 13.56MHz with 1K of memory, ready to be encoded as staff passes for access control. They also suit membership or loyalty schemes.Each card is made with 85% recycled plastic. A PVC laminate on both faces protects the surface, so the card stands up to everyday use just as a standard PVC card would.The white face can be personalised with photographs, names or your logo before the cards are handed out to staff or customers.13.56MHz contactless frequency1K memory85% recycled plastic with a PVC laminate on both sidesCR80 size, 86 x 54mmBlank white, ready to personalisePack of 100 cardsWant to check these will work with your readers? Email sales@plastic-id.com with your system details and we will help...

These blank white cards combine 13.56MHz contactless operation with 4K of memory, giving room for larger amounts of data. Each card can be encoded to suit your setup, whether for access control, visitor management or membership and loyalty schemes.85% of the material in every card is recycled plastic, a more sustainable option that keeps the quality of a standard PVC card.The cards are CR80 size (86 x 54mm) and print on desktop ID card printers. Add monochrome or full colour text, a logo or a photograph to the surface before the chip is encoded.13.56MHz contactless frequency4K memory85% recycled plasticCR80 size, 86 x 54mmPrintable blank white surfacePack of 100 cardsWant to check these will work with your readers? Email sales@plastic-id.com with your system details and we will help...

Genuine TDSi 1K MIFARE® Classic cards (TDSi part 2920-3002), each printed with the TDSi logo and a unique ID number. The printed number makes it quick to record which card has gone to which person when you issue them. Key features MIFARE Classic 1K: 1KB memory split into sectors for access control data TDSi logo and unique ID number printed on every card 13.56MHz contactless smart card technology, ISO/IEC 14443A CR80 ISO card size (85.6 x 54 x 0.76mm), ISO 7810 compliant PVC Passive card: no battery, so no maintenance and unlimited reads Pack of 100 cards Which TDSi card do I need? Plain white 1K MIFARE (2920-3000): blank cards for sites that encode and print their own. 1K MIFARE printed with TDSi logo and ID number (2920-3002): each card carries a printed number, so it can be logged against the cardholder at issue. 1K MIFARE sector 4 encoded (2920-3004): pre-encoded in sector 4 for TDSi systems that read that sector. 4K MIFARE plain white (2920-3001): four times the memory of 1K, for sites that store more data on the card. ISO proximity with magstripe (4262-0247): 125kHz proximity plus a magnetic stripe, for sites running both technologies. SOLOgarde cards (2920-3021): for the TDSi SOLOgarde standalone system, supplied with a programming master card. Not sure which your system uses? Check the part number on an existing card or ask your installer, or send us the details and we will confirm before you order...

Genuine TDSi 1K MIFARE® Classic cards (TDSi part 2920-3000) for TDSi access control systems. These are plain white blank cards, ready to print with your own design on a desktop ID card printer. Key features MIFARE Classic 1K: 1KB memory split into sectors for access control data 13.56MHz contactless smart card technology, ISO/IEC 14443A CR80 ISO card size (85.6 x 54 x 0.76mm), ISO 7810 compliant PVC Passive card: no battery, so no maintenance and unlimited reads Plain white printable surface Pack of 100 cards Which TDSi card do I need? Plain white 1K MIFARE (2920-3000): blank cards for sites that encode and print their own. 1K MIFARE printed with TDSi logo and ID number (2920-3002): each card carries a printed number, so it can be logged against the cardholder at issue. 1K MIFARE sector 4 encoded (2920-3004): pre-encoded in sector 4 for TDSi systems that read that sector. 4K MIFARE plain white (2920-3001): four times the memory of 1K, for sites that store more data on the card. ISO proximity with magstripe (4262-0247): 125kHz proximity plus a magnetic stripe, for sites running both technologies. SOLOgarde cards (2920-3021): for the TDSi SOLOgarde standalone system, supplied with a programming master card. Not sure which your system uses? Check the part number on an existing card or ask your installer, or send us the details and we will confirm before you order...

Genuine TDSi 1K MIFARE® Classic cards (TDSi part 2920-3004), supplied encoded in sector 4 for TDSi access control systems that read that sector. Each card is printed with the TDSi logo and an 8-digit ID number. Key features MIFARE Classic 1K, pre-encoded in sector 4 TDSi logo and unique 8-digit ID number printed on every card 13.56MHz contactless smart card technology, ISO/IEC 14443A CR80 ISO card size (85.6 x 54 x 0.76mm), ISO 7810 compliant PVC Passive card: no battery, so no maintenance and unlimited reads Pack of 100 cards Sector 4 encoded cards suit systems set up to read MIFARE sector data. If you are unsure whether your TDSi system reads sector 4 or the card serial number, check with your installer before ordering. Which TDSi card do I need? Plain white 1K MIFARE (2920-3000): blank cards for sites that encode and print their own. 1K MIFARE printed with TDSi logo and ID number (2920-3002): each card carries a printed number, so it can be logged against the cardholder at issue. 1K MIFARE sector 4 encoded (2920-3004): pre-encoded in sector 4 for TDSi systems that read that sector. 4K MIFARE plain white (2920-3001): four times the memory of 1K, for sites that store more data on the card. ISO proximity with magstripe (4262-0247): 125kHz proximity plus a magnetic stripe, for sites running both technologies. SOLOgarde cards (2920-3021): for the TDSi SOLOgarde standalone system, supplied with a programming master card. Not sure which your system uses? Check the part number on an existing card or ask your installer, or send us the details and we will confirm before you order...

Genuine TDSi 4K MIFARE® Classic cards (TDSi part 2920-3001) for TDSi access control systems. With 4KB of memory, four times the capacity of a 1K card, they suit sites that hold more data on each card. Key features MIFARE Classic 4K: 4KB memory split into sectors 13.56MHz contactless smart card technology, ISO/IEC 14443A CR80 ISO card size (85.6 x 54 x 0.76mm), ISO 7810 compliant PVC Passive card: no battery, so no maintenance and unlimited reads Plain white printable surface Pack of 100 cards Which TDSi card do I need? Plain white 1K MIFARE (2920-3000): blank cards for sites that encode and print their own. 1K MIFARE printed with TDSi logo and ID number (2920-3002): each card carries a printed number, so it can be logged against the cardholder at issue. 1K MIFARE sector 4 encoded (2920-3004): pre-encoded in sector 4 for TDSi systems that read that sector. 4K MIFARE plain white (2920-3001): four times the memory of 1K, for sites that store more data on the card. ISO proximity with magstripe (4262-0247): 125kHz proximity plus a magnetic stripe, for sites running both technologies. SOLOgarde cards (2920-3021): for the TDSi SOLOgarde standalone system, supplied with a programming master card. Not sure which your system uses? Check the part number on an existing card or ask your installer, or send us the details and we will confirm before you order...

Genuine TDSi ISO proximity cards with a magnetic stripe (TDSi part 4262-0247). Each card combines a 125kHz EM proximity chip with an unencoded HiCo magnetic stripe, so one card can work on sites that use both technologies. Every card is printed with the TDSi logo and an 8-digit card number. Key features 125kHz EM4102 proximity chip (64-bit read-only ID) Unencoded HiCo magnetic stripe TDSi logo and 8-digit card number printed on every card CR80 ISO card size (85.6 x 54 x 0.76mm), ISO 7810 compliant laminated PVC, gloss finish Passive card: no battery, so no maintenance and unlimited reads Pack of 100 cards Which TDSi card do I need? Plain white 1K MIFARE (2920-3000): blank cards for sites that encode and print their own. 1K MIFARE printed with TDSi logo and ID number (2920-3002): each card carries a printed number, so it can be logged against the cardholder at issue. 1K MIFARE sector 4 encoded (2920-3004): pre-encoded in sector 4 for TDSi systems that read that sector. 4K MIFARE plain white (2920-3001): four times the memory of 1K, for sites that store more data on the card. ISO proximity with magstripe (4262-0247): 125kHz proximity plus a magnetic stripe, for sites running both technologies. SOLOgarde cards (2920-3021): for the TDSi SOLOgarde standalone system, supplied with a programming master card. Not sure which your system uses? Check the part number on an existing card or ask your installer, or send us the details and we will confirm before you order...

Genuine TDSi SOLOgarde cards (TDSi part 2920-3021) for the TDSi SOLOgarde standalone access control system. Each pack holds 25 1K MIFARE cards plus a programming master card. Key features 25 user cards plus 1 programming master card 1K MIFARE, 13.56MHz, ISO 14443-A Works with the SOLOgarde system and the TDSi MIFARE sector reader CR80 ISO card size (85.6 x 54 x 0.76mm), ISO 7810 and ISO 7816 Cards are added by presenting the master card supplied with the pack to the SOLOgarde reader, or by using the SOLOgarde hand-held programmer. Which TDSi card do I need? Plain white 1K MIFARE (2920-3000): blank cards for sites that encode and print their own. 1K MIFARE printed with TDSi logo and ID number (2920-3002): each card carries a printed number, so it can be logged against the cardholder at issue. 1K MIFARE sector 4 encoded (2920-3004): pre-encoded in sector 4 for TDSi systems that read that sector. 4K MIFARE plain white (2920-3001): four times the memory of 1K, for sites that store more data on the card. ISO proximity with magstripe (4262-0247): 125kHz proximity plus a magnetic stripe, for sites running both technologies. SOLOgarde cards (2920-3021): for the TDSi SOLOgarde standalone system, supplied with a programming master card. Not sure which your system uses? Check the part number on an existing card or ask your installer, or send us the details and we will confirm before you order...

Fotodek is a company that specialises in manufacturing premium quality blank plastic cards for printing a range of card types such as club membership cards, staff identity cards, event passes, and even PVC business cards. Fotodek's premium plain white PVC cards are 760 microns thick and are the same size as a standard credit card (86x54mm) so they are compatible with any ID card printer so you can start printing your personalised photo ID cards right away. These cards are blank so you can apply graphics to the surface of the cards such as photos or various images and you add personal information onto the plastic card to create an ID badge for staff members, membership club-goers, or students. You can even apply important information to the back of your cards such as barcodes and your business's terms and conditions. From loyalty and gift cards to printing branded business cards you can print a variety of card types with our blank Fotodek cards - the list is endless! Premium White Blank PVC Cards – 760 micron (30mil) Standard CR80 – 86x54mm 100 per pack Conforms to ISO/IEC 7810 specifications for ID-1 type cards. Compatible with all plastic card printers...

NXP MIFARE Classic 1K EV1 Cards (MF1ICS50) Genuine NXP MIFARE Classic® 1K EV1 contactless cards, one of the most widely used smart card technologies for access control, cashless vending, transport ticketing and time-and-attendance. Each card carries a unique identifier plus 1K of memory for credentials, user data or balances. The EV1 chip adds stronger security features than earlier MIFARE Classic versions. It is ISO 14443A compliant, reads at close range at 13.56MHz and needs no battery, so the cards stay reliable for years. The plain white PVC face is ready to personalise with photos, names and logos on a desktop ID card printer. For the smoothest finish over the embedded chip, we recommend a retransfer printer. If you need your cards pre-printed or encoded, please contact us. Specification Manufacturer part number: MF1ICS50 Technology: MIFARE Classic 1K EV1, 13.56MHz contactless Standard: ISO 14443A, ITSO accredited Memory: 1K, 106 kbit/s data transfer, 10-year data retention Anti-collision, no battery required Size: CR80, plain white PVC Pack size: 100 cards..

Matte black PVC cards - 760 micron thickness, standard credit card size. Make amazing, professional price signs for any retail environment, perfect for use with a white ribbon and the Edikio or PriceCardPro printers. 100 per pack..

  Pack Size: 100 Size: Standard CR80 – 86x54mm Format: Vertical or Horizontal Material: White PVC -  760 micron (30mil) The perfect starting point for your ID cards. These plain white PVC cards are ready for you to print your own custom designs on, and the high-quality PVC finish ensures realistic colour and logo matching so your brand colours and identity are consistent. Conforms to ISO/IEC 7810 specifications for ID-1 type cards. Each pack of 100 blank PVC cards come shrink-wrapped and dust-free to ensure your ID card printing goes smoothly...

100 Per Pack Card Frequency 125khz EM4200 cards - printable on all desktop ID Card Printers This EM4200 proximity card is well suited for organisations looking for a secure smart card for various applications, this includes access control, cashless vending, biometric identification, transport ticketing, network log-in, clock-in systems, reward schemes, and more. Our EM4200 cards are blank so you can apply your artwork to your cards via an ID card printer. These cards are made with quality plastic and have a clean and scratch-free surface so you can create professional-looking cards.  Simply apply your line art and personalised graphics to create many card types including staff badges, membership cards, event tickets, transport tickets, business cards, loyalty cards, and much more.  These cards are durable and strong enough to withstand the effects of daily card usage...

100 Per Pack Card Memory: 4K Card Type: 13.56 MHz, ISO 14443A Manufacturer Code: MF3D4201DUD/01 The NXP Mifare Desfire contactless smart card introduces new features and enhanced performance for an improved user experience. This card fully complies with the requirements for fast and highly secure data transmission and flexible application management.  Using a capable ID card printer, you can apply full-colour graphics, including photos and custom line art such as barcodes, QR codes, and custom text. With a suitable direct-to-card printer, you can apply other features such as a magnetic stripe and anti-counterfeiting security features to further enhance your card's security or prevent unauthorised individuals from creating fraudulent card copies.  Features: Contactless interface compliant with ISO/IEC 14443-2/3 A Low Hmin enabling operating distance up to 100 mm Fast data transfer: 212 kbit/s 7 bytes unique identifier (option for Random ID) Uses ISO/IEC 14443-4 transmission protocol Configurable FSCI to support up to 128 bytes (256 bytes for 16 and 32 kB) frame size..

Manufacturer code: 692-448 Pack Size: 10 Card Thickness: 760 micron Technology: Net2, Mag Stripe, 125kHz Proximity Format: ISOProx Frequency: 125kHz Card Size: 86mm (w) x 55mm (l) x 0.8mm (d) These Paxton Net2 ISO Prox Cards with magnetic stripe cards for use with Paxton compatible access control systems.  The magnetic stripe design enables the user to swipe the card at any Paxton compatible access control system or for cashless vending and clocking in and out of buildings. These proximity cards feature a Net2 technology, as a result, they can be encoded for proximity control units. Manufacturer Code: Paxton 692-448 Proximity cards for use with Paxton Net2 Access Control System Supplied blank for your own customisation Each card is programmed with a unique 8 digit number Carrier Frequency: 125 kHz Blank CR80 ISO card With Magstripe With signature panel Are you interested in our magstripe Paxton Prox cards but would like it without a magstripe feature? Simply go to our Paxton Net2 ISO Prox cards to get these Paxton access control cards without a stripe design. Our Paxton Net2 key fobs are a similar alternative, they are built with the same contactless technology to allow users to enter and exit access control systems. Shop now!  Paxton10 compatible: Paxton10 readers also read Paxton proximity tokens, so these can be used on a Paxton10 system as well as Net2...