Plastic-ID.com

Black is the colour most organisations reach for when the lanyard should look tidy and stay out of the way. It works with uniforms, suits and security teams. It also keeps the focus on the photo ID it carries.Also available in:RedDark GreenGreyYellowAll 12 colours92cm long from end to end, 10mm wide.Fabric spun from recycled plastic bottles (RPET).Black plastic clip ready for a card holder.Safety release behind the neck that clips back together.Sold in packs of 25...

Dark green is a calm, natural shade that suits estates and grounds teams, environmental groups, garden centres and schools whose colours lean green.Also available in:BlackRedGreyYellowAll 12 coloursDeep forest green strap.Made from recycled PET.10mm width, 92cm end to end.Plastic clip plus a neck breakaway for safety.Sold in packs of 25...

Grey is the neutral that never clashes. It sits comfortably beside any brand colour, so it is a common pick for reception teams, co-working spaces and tech companies.Also available in:BlackRedDark GreenYellowAll 12 coloursMid grey, 10mm recycled polyester.92cm in length.Snap-apart safety release that refits in seconds.Black clip for a badge holder or reel.Sold in packs of 25...

A Rugged, Heavy Duty Badge Reel Built to Take the KnocksThis rugged retractable badge reel is built for jobs that are tough on kit. Staff who spend the day lifting, crouching, squeezing past racking or working outdoors need an ID badge that stays attached and keeps working. The tough black housing and metal cord of this badge reel are made for exactly that.The carabiner keeps the reel clipped to a belt, waistband or rucksack. That holds the ID at the hip, out of the way until someone needs to see it. Use the strap clip for a punched ID card or badge holder, or the metal ring for keys and lockers. Both are supplied with every reel. Pack of 10 Tough black housing Metal retracting cord Carabiner attachment Strap clip and metal ring Perfect for nurses and porters, logistics teams, manufacturing workers and outdoor crews who need their ID to stay put...

These blank white PVC cards carry a contactless Hitag 2 chip running at 125kHz, for access control and time and attendance systems that read Hitag 2 credentials.The chip has 256 bits of EEPROM memory. Each card is ISO CR80 size, 86 x 54 x 0.76mm, the same as a credit card, with a glossy laminated finish.The surface is made for printing. Thermal transfer, dye sublimation and retransfer ID card printers all print onto these cards, turning a blank into a finished photo ID card in one pass.Sold in packs of 100. The cards are PVC, which is not commonly recycled in the UK. Please take them to your local recycling centre rather than putting them in household recycling.Hitag 2 chip, 125kHz256-bit EEPROMCR80, 86 x 54 x 0.76mmGlossy white, printable both sidesPack of 100 cards..

Lockable Conference Case for ID Cards and Name Badges Take up to 500 ID cards, name badges or visitor passes to your event in one tidy, lockable case. Eight dividers slot into the base so you can sort cards however suits you, by surname, company, delegate type or day, and find each one quickly at registration. The key lock keeps the cards secure when they carry personal or sensitive details, and stops them moving and getting mixed up in transit. Key features Holds up to 500 standard CR80 ID cards or badges 8 removable dividers that fit into slots in the base Key lock for security in transit and on the desk Compact size: 30 x 20 x 7 cm Ideal for Conference and exhibition registration desks Staff inductions and card issue days Visitor and contractor pass storage Moving printed cards between sites Specification Part number: 330-5528 Capacity: 500 cards Includes: lockable case with 8 dividers Dimensions: 30 x 20 x 7 cm..

Red gets noticed. Schools, offices and sites often save it for people who must be easy to pick out, such as visitors, fire marshals or anyone allowed into a restricted area.Also available in:BlackDark GreenGreyYellowAll 12 coloursBright red RPET polyester, 10mm across.Overall length 92cm.Breakaway joint pulls apart under strain then reconnects.Fitted with a black plastic clip.Sold in packs of 25...

Yellow is a high-visibility colour that shows up well in a crowd. Event stewards, volunteers, temporary staff and school visitors are often given yellow so they can be spotted quickly.Also available in:BlackRedDark GreenGreyAll 12 coloursSunshine yellow strap, 10mm.Recycled RPET fabric.Measures 92cm end to end.Breakaway at the back of the neck.Black plastic clip.Sold in packs of 25...

Pack size: 100 Model Number: 330-5505 Material: Clear Polycarbonate Card Size: CR80 (86mm x 54mm) Layout: Horizontal ID card holder designed to offer added protection and security to your ID card, without sacrificing the functionality of the card The Badge Buddy has a thumb slot on the reverse to aid removal of the ID card for swiping and replacing cards. Designed to hold one or two standard sized ID cards. The Badge buddy is compatible with either a lanyard or necklace...

  Pack Size: 100 Size: Standard CR80 – 86x54mm Format: Vertical or Horizontal Material: White PVC -  760 micron (30mil) The perfect starting point for your ID cards. These plain white PVC cards are ready for you to print your own custom designs on, and the high-quality PVC finish ensures realistic colour and logo matching so your brand colours and identity are consistent. Conforms to ISO/IEC 7810 specifications for ID-1 type cards. Each pack of 100 blank PVC cards come shrink-wrapped and dust-free to ensure your ID card printing goes smoothly...

A6 Flexible Vinyl Badge Holders, Portrait Clear, flexible vinyl wallets for A6 conference passes, event badges and visitor inserts. The pass slides in through a slit at the back, then the pre-punched holes along the top edge let you hang the holder from a lanyard, clip or badge reel. Both faces are clear, so a printed insert can be read from either side. They are a low-cost way to badge large numbers of delegates, exhibitors or visitors while keeping each pass clean and readable all day. Specification Format: A6, portrait Maximum insert size: 107mm (w) x 154mm (h) Clear on both sides, flexible vinyl Pre-punched holes on the top edge for lanyards and clips Pack size: 100 holders These holders are PVC, which is not usually collected with household recycling in the UK. Please take them to your local recycling centre when you are finished with them...

Our Best Selling Eco-Friendly Name Badge Display Tray is lightweight, cost-effective and easy to transport. Completely recyclable at the end of life! Ensure your cards and name badges look professional and save time by sorting them in our cardboard badge display trays.   Lightweight, crisp white cardboard design Each tray holds 50 badges of any size Takes minutes to set up  Register delegates quickly and efficiently Keeps your delegate names confidential Stays tidy and takes up less space than laying badges on the desk Flat pack for easy shipping, transportation, and minimal storage when not in use Can be used multiple times Low-cost, smart solution ..

Name Badge Conference Case with Foam Tray Insert Transport, Store & Display up to 80 Name Badges Please note: The colour of the case may vary depending on stock levels. Keep your cards and name badges in top condition before and throughout your event with this durable plastic conference case. Featuring a removable foam insert for organisation, the case allows you to transport, store, and display up to 80 landscape CR80 cards for just £49. The foam insert provides individual slots for each card, enabling you to organise name badges ahead of time and making collection seamless for delegates. Lightweight yet sturdy, this case is practical for both pre-event preparation and post-event transport. Key Features Lightweight case weighing just 500g Holds up to 80 CR80 badges per case Removable foam tray for quick setup and easy cleaning Provides confidentiality and organised presentation for name badges Foam insert includes 20 rows with single slots Compact footprint saves desk space (427mm W × 298mm D × 20mm H) Stackable trays for efficient storage when not in use..

20mm Dye Sublimation full-colour personalised lanyards - 15-20 day delivery Low Cost, Full Colour  Fully Personalised Lanyards From as Little as £1.36 a Lanyard! Depending on your lead times, we have the following other services available: 3 days, 5 days or 12 days. Dye-sublimation printing for exact colour matching The intricate design and detailed logo replication Full-colour double-sided print as standard Super smooth polyester lanyard – comfortable to wear and great print quality Health and safety breakaway as standard – increased safety for the wearer and peace of mind for you! Metal trigger clip fitting as standard – lightweight and easy to use The minimum order quantity is just 100 lanyards No maximum order quantity Cheaper, the more you order Delivered in 15-20 working days from artwork sign-off! What is Dye Sublimation Printing? Dye sublimation printing allows for exact Pantone colour matching and reproducing complex designs and logos.  It’s the best option for a really impressive design on your personalised lanyards! Printing on to ultra smooth polyester further enhances the quality of the print and allows for photo-quality images. About 20mm Dye Sublimation full-colour personalised lanyards Our lanyards come with a metal trigger clip as standard.  If you would like another type of fitting, please select this option from the drop-down list. All of our lanyards come with a single health and safety breakaway as standard.  Whilst currently not compulsory, we believe H&S breakaways are essential for protecting the wearer in case the lanyard gets caught or trapped.  In high-risk environments, such as health care and manufacturing, we recommend opting for additional breakaways, meaning the lanyard will break in multiple places if it’s pulled or caught in machinery.  You can select more breakaways or indeed remove them altogether) by selecting the relevant option in the dropdown box. Bulk Order Lanyards Our lanyards are cheaper the more you order!  Simply enter the quantity required in the order quantity box, and the price will automatically be recalculated in your cart. Ordering Personalised Lanyards As soon as we receive your order, a member of our team will be in contact with you to discuss the design and your specific requirements.  You will be sent a colour and artwork proof for sign-off before they are sent to print so you can be sure that the lanyards will be exactly to your specification. Alternatively, you can specify your artwork requirements in the notes field of the checkout process and email your artwork to us at sales@plastic-id.com...

enviricard® Paperboard Cards enviricard® paperboard cards showcase the highest points of quality, durability and sustainability. These 100% plastic-free cards are the ideal solution for printing staff ID cards, membership cards, event tickets, gift cards and loyalty cards.  With the environment in mind, these cards have loads of remarkable features that set them apart from PVC cards. Features of Paperboard Cards: • Pack of 100 • 100% recyclable • Plastic free • Durable and sustainable • Fully customisable • CR80 (credit card sized) • Lowered carbon footprint by up to 95% compared with PVC • Compatible with a range of desktop ID card printers   The paperboard cards are built to last and are designed from high-quality materials to withstand daily wear and tear. They maintain a high-quality appearance over time, making them suitable for various purposes. The cards are produced using bioenergy and natural water sources, minimising the carbon footprint for a greener future. Materials are responsibly sourced, utilising waste from other wood production processes, promoting efficient resource use and reducing landfill burden. The company also contributes to reforestation efforts, planting three trees for every one used in making the paperboard cards, supporting environmental balance. Choosing these cards reflects a conscious decision to opt for durable, eco-friendly, responsibly sourced, and reforestation-driven products. enviricard® Compatibility: These enviricard® paperboard cards are not only compatible with a range of printers but are the only paper-based product on the market that can be fully customised using the YMCK print process on ID card printers. This means you can produce full-colour logos, designs, and photo IDs on a 100% plastic-free card. Printing your custom designs on our paperboard cards is a breeze! These cards are perfectly compatible with a wide range of desktop ID card printers, ensuring hassle-free and high-quality printing. With seamless integration into your card printing processes, you can create personalised cards with ease. enviricard® paperboard cards are compatible with the following printers: •  Magicard Rio Pro 360 •  Magicard 300 •  Magicard 600 •  Magicard Enduro •  Pronto 100 •  Evolis Primacy •  Evolis Primacy 2 •  Evolis Zenius  ..

15mm Dye Sublimation full-colour personalised lanyards - 15-20 day delivery Depending on your lead times, we have the following other services available: 3 days, 5 days or 12 days. Dye-sublimation printing for exact colour matching Intricate design and detailed logo replication Full-colour double-sided print as standard Super smooth polyester lanyard – comfortable to wear and great print quality Health and safety breakaway as standard – increased safety for the wearer and peace of mind for you! Metal trigger clip fitting as standard – lightweight and easy to use The minimum order quantity is just 100 lanyards No maximum order quantity Cheaper, the more you order Delivered in 15-20 working days from artwork sign-off! What is Dye Sublimation Printing? Dye sublimation printing allows for exact Pantone colour matching and reproducing complex designs and logos.  It’s the best option for a really impressive design on your personalised lanyards! By printing on to ultra smooth polyester, further enhances the quality of the print and allows for photo-quality images. About 15mm Dye Sublimation full-colour personalised lanyards Our lanyards come with a metal trigger clip as standard.  If you would like another type of fitting, please select this option from the drop-down list. All of our lanyards come with a single health and safety breakaway as standard. Whilst currently not compulsory, we believe H&S breakaways are essential for protecting the wearer in case the lanyard gets caught or trapped.  In high-risk environments, such as health care and manufacturing, we recommend opting for additional breakaways, meaning the lanyard will break in multiple places if it’s pulled or caught in machinery.  You can select more breakaways or indeed remove them altogether) by selecting the relevant option in the dropdown box. Bulk Order Lanyards Our lanyards are cheaper the more you order!  Simply enter the quantity required in the order quantity box, and the price will automatically be recalculated in your cart. Ordering Personalised Lanyards As soon as we receive your order, a member of our team will be in contact with you to discuss the design and your specific requirements.  You will be sent a colour and artwork proof for sign-off before they are sent to print to ensure that the lanyards will be exactly to your specification.  Alternatively, you can specify your artwork requirements in the notes field of the checkout process and email your artwork to us at sales@plastic-id.com...

Pack size: 100Model Number: 328-3225Colour: RedSize (Width): 15mmSize (Length): 45cmMaterial: RPET, made from recycled plastic bottles About These Red Visitor Lanyards These bright red visitor lanyards with plastic clips provide a highly visible signal that tells your team who's a guest and who isn't without needing to check an ID card up close. At 45cm and 15mm wide, it sits comfortably for a full day's visit, and the plastic clip holds a card holder or ID badge securely without adding unnecessary weight around the neck.It's made from recycled plastic bottles turned into a durable lanyard rather than virgin plastic. So choosing this over a standard lanyard cuts down on waste without compromising on quality. A health and safety breakaway is fitted as standard too, so if it's pulled or caught, it releases safely rather than becoming a hazard, then clips straight back together. This same lanyard is also available with a metal clip instead of plastic. Lanyards with metal lobster clips are better suited to sites where the chances of catching the lanyard on something are high, as they stand up to a bit more abuse than the plastic J clips fitted to these ones...

Pack size: 100 Size: Standard CR80 – 86x54mm Format: Vertical or Horizontal Material: White PVC Self-adhesive PVC cards ideal for printing your own custom ID card designs. The self adhesive option allows your ID cards to be stuck to other surfaces a non-printable proximity card without losing any of the quality you expect from the print. Also a great way to freshen up an older card without creating any waste..

Pack Size: 100 Model Number: 330-5544 Material: Polycarbonate Size: CR80 (86x54mm) Enclosed Badge Holders - Vertical - pack of 100 Give your ID card the protection and security it deserves with this double-sided vertical enclosed badge holder. The clear polycarbonate body offers scratch resistance and protection against fading from the elements, making these popular with outdoor usage The clear material provides full visibility of the ID card, meaning it can handle smart cards and access control cards, but still has the option of easy removal with the tapered thumb holder on the reverse Suitable for use with either lanyards or necklaces...

The lockable enclosed card holder are designed for high security environments. The badge holder can only be opened with the supplied key. Without the key the holder has to be broken. Comes with 1 key per 100 holders. Pack of 100 with 1 key..

This 15mm black polyester lanyard is pre-printed with "SIXTH FORM" in white. It's designed to make older students easy to identify at a glance around the rest of the school and comes with a plastic clip and a safety breakaway fitted as standard. They are sold in packs of 100. The breakaway clip The safety breakaway is built to snap apart cleanly if the lanyard gets pulled, caught on a door handle or snagged during a corridor scuffle, then clips straight back together afterwards. It's a standard health and safety feature on all our pre-printed lanyards, not an upgrade, so there's nothing extra to specify when ordering. Part of a whole-school system Sixth form students wearing black lanyards helps them stand apart from the rest of the school without you having to design anything. Our range of school lanyards also includes red STAFF lanyards and purple STUDENT lanyards for younger year groups, so different groups are identifiable at a distance just by lanyard colour and text. They are useful at reception, on the gate or when a supply teacher needs to tell who's who. We stock a range of print lanyards for volunteers and visitors in different colours to ensure that anyone on your site can be quickly identified. Explore the full range of our lanyards to make sure you have everything you need for anyone on site. Complete Your ID Printing Solution Along with our high-quality pre-printed lanyards, we also stock open-faced badge holders, available in enough colours to colour-code alongside the lanyard itself, retractable badge reels if students or staff are tapping in and out of doors regularly, blank ID cards and ID card printers to complete an in-house ID printing solution. FAQs About Pre-Printed Sixth Form Lanyards Can we order different lanyards for other year groups at the same time? Yes, the pre-printed range includes staff, student, visitor and contractor versions in different colours, so you can order a mix in one go if you're setting up identification across the whole school. We also stock a huge range of plain lanyards and can personalise lanyards with your school's logo and name on them. Does the breakaway meet health and safety standards? Yes, it's fitted as standard on every lanyard in this range and is designed to release cleanly under snagging or pulling, then reconnect afterwards. How quickly will this arrive before term starts? Orders for pre-printed sixth form lanyards placed before 2:30 pm Monday to Friday will be delivered the next day. Order online or get in touch with the team and take a look at our customer reviews if you'd like to hear from other schools before you order...

Pack size: 100 Model Number: 330-5534 Material: Clear Polycarbonate Card Size: CR80 (86mm x 54mm) Layout: Vertical Vertical ID card holder designed to protect your ID cards without losing any of the functionality Clear Polycarbonate body offers added stability to the card, but still maintains a high visibility of the important details on the ID card The Badge Buddy has a thumb slot on the reverse to aid removal of the ID card for swiping and replacing cards. Designed to hold one or two standard sized ID cards. The Badge buddy is compatible with either a lanyard or necklace...

Flexible PVC wallet designed for temporary ID and visitor passes Clear Horizontal orientation Maximum insert size: 110mm (w) x 105mm (h) (landscape) External size: 125mm (w) x 114mm (h) Pack of 100..

The credit card size windscreen car park pass holder is ideal for displaying car park passes. This flexible holder has an adhesive front which can be attached to the windscreen allowing easy inspection and visibility. Inner size: 54mm H x 89mm W Outer size: 62mm H x 92mm W Pack of 100..

About These LanyardsOn top of a visitor badge, these lanyards offer quick and easy identification and are perfect for holding an ID card holder or ID badge and allowing everyone on site to know exactly where visitors are at a glance.The health and safety breakaway is fitted as standard so that if it catches on a door handle or gets grabbed, it lets go safely and clips straight back together in seconds. At 15mm wide and made from flat polyester, it sits comfortably around the neck for a full day's wear without digging in.If you're looking for visitors lanyards with plastic J clips that look great, represent your brand well and will hold up to years of use, these green lanyards are a great choice. Choosing Green for Your VisitorsGreen gives your visitors a colour of their own, separate from whatever your staff already wear. If your team's in black, navy, or another dark shade, a dark green lanyard with bright white lettering stands out instantly, so it's useful at reception, on the gate, or anywhere staff need to spot a visitor without checking a badge up close. In a school, that same separation supports safeguarding directly. Staff can tell at a glance who's a visitor and who isn't, even in a busy corridor between lessons.It's also a natural fit if green already sits in your branding. Environmental, healthcare, and education organisations use it as a core colour, so a green visitor lanyard slots straight into an existing scheme rather than fighting against it. And if none of that applies to you, it's still a calm, easy, professional colour that works well in any reception or workplace setting...

Pack Size: 100 Model Number: 331-5702 Material: PVC Insert Size: 62mm x 92mm Outer Size: 87mm x 96mm Layout: Horizontal Flexible Badge Holder Credit Card Size - Horizontal - pack of 100 Keep your ID card safe and secure with this PVC pouch for all standard sized cards Offering protection against daily wear and tear as well as fading from the elements, these PVC badge holders are lightweight enough for wearing yet strong enough to offer a high level of protection for your ID card Compatible with both lanyards and necklaces..

692-500 Compatible Net2 Blank White Cards (Pack of 10) These 692-500 blank white cards are specifically designed for use with Net2 access control systems, providing an ideal solution for enhancing security within your organisation. These cards can be easily programmed to meet your specific needs and can be customised using your ID card printer, ensuring they meet your unique requirements. With a high-frequency capability, these cards transmit secure data between the card and your readers. Constructed from durable PVC material, these high-quality cards are built to withstand daily wear and tear. Each card is encoded with a unique 8-digit numeric code to further enhance security and is fully compatible with Net2 proximity ISO systems. Please note: These cards do not include a magnetic stripe (Magstripe).   Top Features: Compatible with 692-500 systems CR80 Credit Card Size Frequency: 13.56MHz 1K Cards Card Thickness: 820 Micron Pack of 10 Cards  ..

100 Per Pack Plain White Blank PVC Cards - 480 micron. CR80 - 86 x 54mm Compatible with all plastic card printers (ID card printers) Our plain white plastic CR80 cards are made from premium plastic materials and manufactured to produce a clean, smooth, and scratch-free surface to make plastic card printing easier for you. With these high-quality cards, you can start applying personalised graphics and unique text onto the surface of your blank cards and create appealing membership cards, identity cards, event tickets, loyalty/gift cards, business cards, and the list goes on! ..

About These LanyardsThis 15mm blue lanyard with "STAFF" printed on it in white comes with a plastic J clip on the end for clipping on an ID card holder or an ID badge. It's got a safety breakaway fitted too; that's the bit at the back that lets go if it ever gets caught on something, then just clips straight back together, so nobody's getting yanked about if it snags on a door handle. It's nice and comfortable for a full shift thanks to the thickness too, so your staff won't mind wearing it all day long.Why People Go for BlueBlue is widely associated with calm, trust, and cleanliness, so it's excellent in offices, shops and healthcare settings, or anywhere patients or visitors might feel anxious. Blue also has strong contrast against skin tones, meaning these lanyards stand out really clearly and it's one of the more distinguishable colours for most forms of colour blindness, which makes it a safe choice for ID card holders, lanyards, wristbands and even signage. It's also handy if you're running different lanyards for different people on site, say your visitors are in red and your staff are in blue. Everyone can tell who's who at a glance, which sounds simple, but it genuinely saves a lot of "sorry, are you with the company?" conversations throughout the day...

Pack size: 100 Size: Standard CR80 – 86x54mm Format: Vertical or Horizontal Material: White PVC with magnetic strip High quality blank white PVC cards, ideal for you to print your own custom designs onto. The PVC finish ensures realistic colour and logo matching so your brand colours and identity are consistent Conforms to ISO/IEC 7810 specifications for ID-1 type cards. Each pack of 100 blank PVC cards comes shrink wrapped and dust free to ensure your ID card printing goes smoothly. Hi-Co Magnetic strip can be pre-programmed, Please contact us for assistance..

If you're looking for something smaller than a standard credit card-sized blank card our 3 part key tags are perfect for you! These plain white plastic cards are basically CR80 cards divided into three smaller cards. Compared to normal cards 3 tag cards are discreet and smaller in size so you can attach them to your keys or even your wallet. Each card has a pre-drilled hole so it can be readily attached to a key ring. These tags can be used with most standard ID Card printers to create personalised card designs and you print unique QR codes and barcodes to the surface of the card.  Are you a runner or jogger? Why not apply your emergency information to these cards and attach them to your shoelaces when you're going out for your daily run? This way you can make sure your medical and personal information is with you if an accident were to occur?  These are ideal for attaching to key rings Individual Tag Size: 28mm wide x 54mm depth x 0.76mm thick Overall 3 Part Tag Size: 86mm wide x 54mm depth x 0.76mm thick Pack size: 100..

This enclosed rigid cardholder holds up to 2 ID cards securely. The clear rigid plastic is fully transparent to make sure that the cards inside are easily readable. The cardholders are made using 100% biodegradable plastic. The maximum capacity of this holder is 2 CR80, 760 micron cards, but is best suited to holding 1 card, particularly if using access control cards that are slightly thicker...

Strap clip with a reinforced strap and nylon cushion mechanism 100 per pack..

Conference Badge Holder with Clip and Pin (Pack of 50) Pack Size: 50 badges Badge Holder Style: Single Sided These 90mm (W) x 60mm (H) badge holders are perfect for conferences or events where you need to provide identification.  Designed for convenience, they come equipped with an easy to use pin and clip, allowing you to easily attach them to shirts, jackets, suits, lanyards and more. Additionally, the clip is an alternative as it can attach to pockets and thick fabrics. An ideal solution if you are looking for a versatile, professional holder that is super accessible and adaptable. Securely insert the badge and the holder will do the rest for you! Please note this product no longer comes with paper inserts..

About These LanyardsThis is our blue "STAFF" lanyard with a metal clip, 15mm wide, with the word printed clearly in white so there's no mistaking who's part of your team. The metal lobster clip swivels a full 360 degrees, so whatever you've clipped on, an ID badge, a card holder or a set of keys, moves naturally with your staff rather than twisting the lanyard up through the day. A safety breakaway is fitted too, so if it ever gets caught on something, it lets go safely rather than pulling on whoever's wearing it.Built for Daily UseIf your staff are tapping in and out on access control readers throughout the day, this clip is built to take that kind of repeated handling without wearing out. It'll comfortably hold an ID badge alongside a set of keys too, so your team's not juggling multiple lanyards or key rings just to carry everything they need for their shift...

Pack size: 100 Model Number: 327-4020 Fitting Type: Metal Clip Material: Frosted Nylon Simple and effective method to attaching your ID card in a visible and relevant location – without ruining your clothes. Simply thread the popper end of the strap through your ID card holder and attach the metal clip to your clothing – whether it be a blazer pocket, shirt or belt. Durable nylon material and quality metal clip offers a reliability and quality...