Access Control Cards & Fobs

These 692-500 compatible proximity cards work alongside the 692-500 cards you already use. Each card is encoded with its own unique 8-digit number, so every card on your system can be identified individually.Entry is contactless at 125kHz, giving staff quick and simple access every time they present the card to a reader.The cards are standard CR80 size (86 x 54mm) at 760 micron thickness, manufactured to ISO standards. They print on any desktop ID card printer in full colour or monochrome, so you can add photos, names and company branding to turn them into staff ID cards.They are supplied shrink-wrapped in packs of 10.Compatible with existing 692-500 cards125kHz proximity technologyUnique 8-digit number on every cardCR80, 86 x 54mm, 760 micronPrintable on all desktop ID card printersPack of 10 cards..

NXP MIFARE Classic 1K EV1 Cards (MF1ICS50) Genuine NXP MIFARE Classic® 1K EV1 contactless cards, one of the most widely used smart card technologies for access control, cashless vending, transport ticketing and time-and-attendance. Each card carries a unique identifier plus 1K of memory for credentials, user data or balances. The EV1 chip adds stronger security features than earlier MIFARE Classic versions. It is ISO 14443A compliant, reads at close range at 13.56MHz and needs no battery, so the cards stay reliable for years. The plain white PVC face is ready to personalise with photos, names and logos on a desktop ID card printer. For the smoothest finish over the embedded chip, we recommend a retransfer printer. If you need your cards pre-printed or encoded, please contact us. Specification Manufacturer part number: MF1ICS50 Technology: MIFARE Classic 1K EV1, 13.56MHz contactless Standard: ISO 14443A, ITSO accredited Memory: 1K, 106 kbit/s data transfer, 10-year data retention Anti-collision, no battery required Size: CR80, plain white PVC Pack size: 100 cards..

Salto MIFARE 1K Cards (PCM01KB) Genuine Salto PCM01KB cards for Salto access control, including Salto Virtual Network systems. Each card carries a MIFARE 1K chip operating at 13.56MHz, so staff can open doors and gates with a simple tap on a Salto reader. The cards are blank white CR80 PVC, ready to personalise with photos, names and logos on your ID card printer. That lets one card act as both the photo ID badge and the access credential, which suits offices, schools and healthcare sites alike. For the best finish over the embedded chip we recommend a retransfer card printer. Specification Manufacturer part number: PCM01KB Technology: MIFARE 1K, 13.56MHz contactless Size: CR80 (86mm x 54mm), plain white PVC Data retention: 10 years Pack size: 100 cards Check that your Salto system reads MIFARE 1K credentials before ordering. If you are not sure, send us your reader model and we will confirm...

Salto MIFARE® 1KB reusable key fobs in blue. New 7 Byte UID Version 10 Per Pack Salto Virtual Network compatible Customised colours available - please contact us for details Manufacturer Code: PFM01KB..

Paxton Net2 ISO Printable MIFARE Card - Pack of 10 - 692-148  Manufacturer: Paxton Manufacturer Part Number: 692-148 SKU: 692-148 Pack Size: 10 Product Type: PVC Cards Card Thickness: 760 micron Technology: Net2 Format: Paxton NXP MIFARE Frequency: 13.56Mhz Card Size: 86mm (w) x 54mm (l) x 0.8mm (d) About Paxton Net2 ISO Printable MIFARE Card - Pack of 10 - 692-148  •    MIFARE cards for use with Paxton Net2 Access Control System •    Supplied blank for your customisation •    Each card is programmed with a unique 8-digit number •    Blank CR80 ISO card •    Without Magstripe & Signature panel Paxton10 compatible: Paxton10 readers also read MIFARE® tokens, so these can be used on a Paxton10 system as well as Net2. Frequently asked questionsWhich Net2 readers work with the 692-148 MIFARE card?Use readers that read MIFARE, such as the P50 MIFARE reader 353-467, which reads MIFARE tokens by serial number (UID) only. The standard P50 reader 353-110 does not list MIFARE.Can I enrol the 692-148 with a Net2 desktop reader?Yes. The Net2 USB desktop reader 514-326 reads MIFARE tokens by serial number. It needs Net2 v4.15 or later for MIFARE support.Can I print on the 692-148 card?It is an ISO card, so it can go through a dye sublimation ID card printer that prints direct to plastic. Paxton confirms these printers work with Net2 ISO cards.How close does it need to be to the reader?Paxton quotes up to 60mm for an ISO card on the P50 MIFARE reader 353-467.{"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Which Net2 readers work with the 692-148 MIFARE card?", "acceptedAnswer": {"@type": "Answer", "text": "Use readers that read MIFARE, such as the P50 MIFARE reader 353-467, which reads MIFARE tokens by serial number (UID) only. The standard P50 reader 353-110 does not list MIFARE."}}, {"@type": "Question", "name": "Can I enrol the 692-148 with a Net2 desktop reader?", "acceptedAnswer": {"@type": "Answer", "text": "Yes. The Net2 USB desktop reader 514-326 reads MIFARE tokens by serial number. It needs Net2 v4.15 or later for MIFARE support."}}, {"@type": "Question", "name": "Can I print on the 692-148 card?", "acceptedAnswer": {"@type": "Answer", "text": "It is an ISO card, so it can go through a dye sublimation ID card printer that prints direct to plastic. Paxton confirms these printers work with Net2 ISO cards."}}, {"@type": "Question", "name": "How close does it need to be to the reader?", "acceptedAnswer": {"@type": "Answer", "text": "Paxton quotes up to 60mm for an ISO card on the P50 MIFARE reader 353-467."}}]}..

Kantech ioProx Proximity Keytag - Pack of 25 Manufacturer: Kantech Manufacturers part code: P40KEY Pack Size: 25 keyfobs. Product Type: Keytags/Keyfobs Technology: 125KHz Proximity Typical Maximum Read Range: 9.33 cm to 73 cm (depending on the reader) About Kantech ioProx Proximity Keytag - Pack of 25 Fits conveniently to your keys or to a badge reel, lanyard or chain. The Kantech ioProx proximity card is compatible with all ioProx readers and ioPass stand-alone systems. The cards come pre-programmed. All you need to do is enrol them into your system.   This product is made of a type of plastic which is not commonly recycled in the UK. It, therefore, cannot be disposed of in your normal recycling refuse collection. We recommend taking it to your local recycling centre for a securer and more eco-friendly disposal.  .recyclingbox{border-color:#032366;border:solid;border-width:5px;border-color:#032366;border-radius:200px;padding-right:5%;margin:auto;overflow:auto;max-width:740px}.recyclingsymbol{float:left;height:auto;width:150px;padding-right:5px}.recyclinginfo{padding-top:12px;font-family:Arial;font-size:14px}@media only screen and (max-width: 1199px){.recyclinginfo{padding-top:2%;font-size:12px}}@media only screen and (max-width: 991px){.recyclinginfo{padding-top:2%;font-size:1.5vw;padding-left:5%}.recyclingbox{border-radius:25px 50px}.recyclingsymbol{width:100px;height:auto}}@media only screen and (max-width: 500px){.recyclinginfo{padding:0px 4px 4px 25px;font-size:14px}.recyclingsymbol{height:auto;width:100px;float:none;margin:auto;display:block;padding-right:0px}.recyclingbox{height:auto;width:75%;border-radius:30px}}..

About EM4200 and MIFARE Classic EV1 1K Combined Technology White PVC Cards Product Code: EM4200M1K Pack Size: 100 cards Material: PVC Personalisation: Can be printed with any plastic card printer. If you would like us to print the cards for you, please contact us for a quote. Applications: Access control, time and attendance, transport, print release, cashless vending Technical Specifications White PVC Standard credit card size and thickness (CR80, 30 mil) 128 bit 100–150 KHz frequency range Card memory: 1K Frequency: 13.56 MHz + 125 KHz 2–10 cm reading distance RF protocol: ISO11784/785 + ISO11443 Temperature range: -40°C to +85°C Data storage up to 10 years The EM4200 is a proximity card containing a CMOS integrated circuit for use in electronic read-only radio frequ..

ACTPRO Printable MIFARE® Classic 1KB Cards Pack of 10 cards Manufacturer's Product code: ACTMFCARD-B Product Type: Printable PVC Cards, Proximity Cards Card Thickness: 760 micron Manufacturer: ACT Technology: MIFARE Format: MIFARE Classic..

Paxton Switch 2 Proximity 50 card pack Manufacturer: Paxton Product Type: PVC Cards, Proximity Cards Card Thickness: 820 micron Technology: Switch2 Format: ISOProx Frequency: 125kHz About Paxton Switch 2 Proximity 50 Card Pack Use with Compact and Switch2 systems All users are valid after enrolment A lost card can be voided with a shadow card Additional packs can be added easily Simple function cards are included Includes 50 printable ISO Proximity cards and 50 shadow cards Lifetime warranty Compatible with Proximity Compact, Easyprox Compact and Switch2 systems About - PROXIMITY card packs are used with PROXIMITY compact, Easyprox compact and Switch2 systems. The cards are supplied in wallets. An intuitive "shadow card" system is used for ease of management. Operation - User cards are supplied in wallets. Each card is packaged with a corresponding shadow card. Once installation of the system is complete, all user cards are valid and ready to be issued. To issue a user card, remove it from the wallet and write the user's name on its corresponding shadow card. The user may now use their card to gain access. This process is repeated for all users. If a card needs to be invalidated, the corresponding shadow card is removed from the wallet and presented to relevant readers on the site. This invalidates the card. This product is made of a type of plastic which is not commonly recycled in the UK. It, therefore, cannot be disposed of in your normal recycling refuse collection. We recommend taking it to your local recycling centre for a securer and more eco-friendly disposal. .recyclingbox{border-color:#032366;border:solid;border-width:5px;border-color:#032366;border-radius:200px;padding-right:5%;margin:auto;overflow:auto;max-width:740px}.recyclingsymbol{float:left;height:auto;width:150px;padding-right:5px}.recyclinginfo{padding-top:12px;font-family:Arial;font-size:14px}@media only screen and (max-width: 1199px){.recyclinginfo{padding-top:2%;font-size:12px}}@media only screen and (max-width: 991px){.recyclinginfo{padding-top:2%;font-size:1.5vw;padding-left:5%}.recyclingbox{border-radius:25px 50px}.recyclingsymbol{width:100px;height:auto}}@media only screen and (max-width: 500px){.recyclinginfo{padding:0px 4px 4px 25px;font-size:14px}.recyclingsymbol{height:auto;width:100px;float:none;margin:auto;display:block;padding-right:0px}.recyclingbox{height:auto;width:75%;border-radius:30px}} Frequently asked questionsHow do I start using a pack of 50 Switch2 proximity cards?Present the enrolment card from the pack to the reader. Once it beeps and the LEDs light, all 50 user cards in the pack are valid at that reader. Do the same at every reader on the site.What is the shadow card for?Each user card has a matching shadow card. Write the user's name on the shadow card when you issue the card and keep it safe, because presenting that shadow card at each reader is how a lost card is barred.Which function ca..

ACTPRO FOBS with MIFARE® Classic® Technology 1KB Fobs Pack of 10 Product Type: Keytags/Keyfobs. Contact Chip, Slot/Hole Punched Manufacturer: ACT Technology: MIFARE® Format: MIFARE® Classic Frequency: Other Technology..

KeyPAC ISO Proximity Cards (PAC-CD-CR-KPAC) Manufacturer code: PAC-CD-CR-KPAC (previously 21030 / 21018 / K3011) Genuine KeyPAC ISO proximity cards for PAC and KeyPAC access control systems. They work at 125kHz, so staff gain access to doors, car park barriers and turnstiles simply by presenting the card to a KeyPAC reader. The card is ISO credit-card thin at 0.76mm, which means you can print photos, names, logos and barcodes straight onto the front with a desktop ID card printer. One card can then serve as the photo ID badge, the access credential and a time-and-attendance card. A genuine KeyPAC ISO card is easy to spot: look for four black dots in a square in the bottom right corner. Specification Manufacturer part number: PAC-CD-CR-KPAC (also listed as 21018, 21030 and 909021018) Technology: KeyPAC 125kHz proximity Size: CR80 (85.6mm x 54mm), 0.76mm thick Printable on standard desktop ID card printers Pack size: 10 cards Need a magnetic stripe as well for vending or printing systems? Contact us and we will check the right KeyPAC variant for you...

Paxton Net2 ISO Proximity Cards (692-500) Genuine Paxton 692-500 cards for the Paxton Net2 access control system. Each card uses 125kHz proximity technology and comes pre-encoded with a unique 8-digit number, so Net2 recognises every user individually. To enrol a card, tap it on your Net2 desktop reader, enter the user's details and assign their access rights. Staff, visitors and contractors then open doors by simply presenting the card to any Net2 reader. The cards are ISO standard with a blank white front and back, so they print on all standard desktop ID card printers. Add a photo, name, logo or department colour to turn the access card into a full photo ID badge. If you would rather we print or personalise them for you, please contact us. Specification Manufacturer part number: Paxton 692-500 System: Paxton Net2 Technology: 125kHz proximity, unique 8-digit ID Size: ISO card, 86mm x 55mm x 0.85mm Finish: blank white, printable both sides Pack size: 10 cards Paxton10 compatible: Paxton10 readers also read Paxton proximity tokens, so these can be used on a Paxton10 system as well as Net2. Frequently asked questionsWill Paxton 692-500 cards work with my Net2 system?Yes. The 692-500 is Paxton's Net2 proximity ISO card without a magnetic stripe. It runs at 125kHz and is enrolled through the Net2 software.Can I print photos on these cards?Yes. Paxton confirms that dye sublimation ID card printers which print direct to plastic work with Net2 ISO cards. The 692-500 has no signature strip or magnetic stripe to work around.How do I enrol a 692-500 card?Present it to a Net2 desktop reader. The new user wizard opens with the card number filled in so you can add the user's details and access level.What size is the 692-500 card?Paxton lists it at 86 x 55mm and 0.85mm thick, supplied in packs of 10.{"@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [{"@type": "Question", "name": "Will Paxton 692-500 cards work with my Net2 system?", "acceptedAnswer": {"@type": "Answer", "text": "Yes. The 692-500 is Paxton's Net2 proximity ISO card without a magnetic stripe. It runs at 125kHz and is enrolled through the Net2 software."}}, {"@type": "Question", "name": "Can I print photos on these cards?", "acceptedAnswer": {"@type": "Answer", "text": "Yes. Paxton confirms that dye sublimation ID card printers which print direct to plastic work with Net2 ISO cards. The 692-500 has no signature strip or magnetic stripe to work around."}}, {"@type": "Question", "name": "How do I enrol a 692-500 card?", "acceptedAnswer": {"@type": "Answer", "text": "Present it to a Net2 desktop reader. The new user wizard opens with the card number filled in so you can add the user's details and access level."}}, {"@type": "Question", "name": "What size is the 692-500 card?", "acceptedAnswer": {"@type": "Answer", "text": "Paxton lists it at 86 x 55mm and 0.85mm thick, supplied in packs of 10."}}]} Product documentsManufacturer documentation from Paxton for this product:Paxton ..