-770x257h.jpg)
Brand: Expobadge
Model: EXP-25350908
ExpoBadge 260S (25350908) is the compact member of the 260 family: 96.5 mm wide but only 82 mm tall, with three slots along the top edge. It folds on the perforation to give a printed front and back, using less stock per badge than the full-height 260 while keeping the width that lets a full name sit on one line.Who it suitsGood for internal events, training days, visitor badges at reception and short networking sessions, where a smaller badge looks tidier and the details are limited to name, organisation and perhaps a colour band.How it comparesThe ExpoBadge 260TS is this same 96.5 x 82 mm size on tear-resistant stock. For FSC-certified paper in the compact size, look at the ExpoBadge T180S.SpecificationManufacturer part number25350908Our product codeEXP-25350908ModelExpoBadge 260SBadge size96.5 x 82 mmSlotsThree slotsStockStandardAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£121.58
Inc Tax:£145.90
Brand: Expobadge
Model: EXP-25350911
The ExpoBadge 260 (part number 25350911) is the standard full-size butterfly badge in the range and the one most events start with. Each label measures 96.5 x 134 mm and folds along its horizontal perforation, so one print gives a badge that reads the same from the front and the back. Three pre-cut slots across the top take a clip, a lanyard hook or a pin, so you can change how delegates wear their badge without changing stock.Who it suitsChoose the 260 for conferences, trade shows and AGMs where badges are worn for a day or two and you want plenty of room for a name, company, logo and QR code.How it comparesNeed it to survive an outdoor event or several days of wear? The ExpoBadge 260T uses the same 96.5 x 134 mm layout on tear-resistant stock. Handing out drinks or meal tokens? The ExpoBadge 260+ adds two tear-away vouchers. For a smaller badge, the ExpoBadge 260S cuts the height to 82 mm.SpecificationManufacturer part number25350911Our product codeEXP-25350911ModelExpoBadge 260Badge size96.5 x 134 mmSlotsThree slotsStockStandardAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£142.89
Inc Tax:£171.47
Brand: Expobadge
Model: EXP-25350912
ExpoBadge 260+ (25350912) takes the full-size 96.5 x 134 mm butterfly badge and adds two tear-away vouchers, so the badge doubles as a ticket. Print the delegate name on the badge and a drink, lunch or session entry on each voucher in the same pass, then tear them off at the bar or the door. Three slots at the top accept a clip or lanyard fitting.Who it suitsIt suits gala dinners, exhibitor parties and conferences with catering included, where separate paper tickets go missing and slow down the queue.How it comparesIf you do not need vouchers, the ExpoBadge 260 is the same size without them and costs less per pack. For a badge that copes with heavier handling, see the tear-resistant ExpoBadge 260T.SpecificationManufacturer part number25350912Our product codeEXP-25350912ModelExpoBadge 260+Badge size96.5 x 134 mmSlotsThree slotsStockStandardAdhesive backingYesVouchersTwo tear-away vouchersFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£218.92
Inc Tax:£262.70
Brand: Expobadge
Model: EXP-25350920
ExpoBadge 260T (25350920) keeps the full 96.5 x 134 mm butterfly layout and three slots of the standard 260 but is made from tear-resistant stock, so badges stay intact after being clipped, unclipped, pocketed and rained on across a multi-day show. It prints and folds exactly like the standard badge.Who it suitsPick it for outdoor festivals, site open days, sports fixtures and anything running over several days, where a torn badge at the gate means a reprint and a queue.How it comparesIf your badges hang from a single lanyard hook, the ExpoBadge 260T-EU has the same tear-resistant stock with one Euro slot instead of three. For a tear-resistant badge with no adhesive backing, see the ExpoBadge T180T.SpecificationManufacturer part number25350920Our product codeEXP-25350920ModelExpoBadge 260TBadge size96.5 x 134 mmSlotsThree slotsStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£212.81
Inc Tax:£255.37
Brand: Expobadge
Model: EXP-25350921
ExpoBadge 260TS (25350921) combines the compact 96.5 x 82 mm size with tear-resistant stock and three slots. It is the badge to use when you want the smaller footprint of the 260S but need it to last through handling, weather or a long event.Who it suitsUseful for volunteers, stewards and marshals at outdoor or multi-day events, and for site visitor passes that are clipped on and off repeatedly.How it comparesThe standard-stock version is the ExpoBadge 260S, which costs less if durability is not a concern. For the same compact size with no adhesive backing, see the ExpoBadge T180TS.SpecificationManufacturer part number25350921Our product codeEXP-25350921ModelExpoBadge 260TSBadge size96.5 x 82 mmSlotsThree slotsStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£161.86
Inc Tax:£194.23
Brand: Expobadge
Model: EXP-25350922
ExpoBadge 260TC (25350922) is the smallest badge in the range at 86 x 54 mm, standard credit card size, made from tear-resistant stock with a single Euro slot. It folds on its perforation like the larger ExpoBadges, giving a compact two-sided badge that is quick to print in large numbers.Who it suitsIdeal for visitor and staff passes, and for crew or exhibitor-only areas where the badge carries a name and a role rather than a full delegate profile.How it comparesThe ExpoBadge 260TCN is the same 86 x 54 mm tear-resistant badge with no slot, for use in a holder or pouch. For more print area with the same Euro slot, step up to the ExpoBadge 260T-EU.SpecificationManufacturer part number25350922Our product codeEXP-25350922ModelExpoBadge 260TCBadge size86 x 54 mmSlotsSingle Euro slotStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£131.09
Inc Tax:£157.31
Brand: Expobadge
Model: EXP-25350923
ExpoBadge 260TCN (25350923) is an 86 x 54 mm tear-resistant butterfly badge, the smallest size in the range and standard credit card size, with no slots at all. Without a cut-out the whole face is printable, which makes it the cleanest option when the badge goes into a holder, sleeve or pouch rather than hanging from a fitting.Who it suitsIdeal for visitor and staff passes when your site already uses card holders or lanyard pouches and you only need the printed insert.How it comparesIf you want to hang it straight from a hook, the ExpoBadge 260TC is the same size with a Euro slot. The next size up is the 96.5 x 82 mm ExpoBadge 260TS, which has three slots.SpecificationManufacturer part number25350923Our product codeEXP-25350923ModelExpoBadge 260TCNBadge size86 x 54 mmSlotsNo slotsStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£131.09
Inc Tax:£157.31
Brand: Expobadge
Model: EXP-25350940
ExpoBadge 260T-EU (25350940) is a tear-resistant 96.5 x 134 mm butterfly badge with a single Euro slot, the hanger-shaped cut-out you see on retail packaging. With one fitting point the badge hangs straight from a lanyard hook or clip instead of choosing between three slots.Who it suitsIt is the one to choose when your badges are issued on hooked lanyards as standard, as at many larger exhibitions and international conferences where Euro-slot fittings are the norm.How it comparesThe ExpoBadge 260T is the same stock and size with three slots for more fitting options. For a small, card-sized badge with a Euro slot, see the ExpoBadge 260TC.SpecificationManufacturer part number25350940Our product codeEXP-25350940ModelExpoBadge 260T-EUBadge size96.5 x 134 mmSlotsSingle Euro slotStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£235.02
Inc Tax:£282.02
Brand: Expobadge
Model: EXP-25350974
ExpoBadge T180TS (25350974) is the compact 96.5 x 82 mm version of the T180T: tear-resistant, no adhesive backing, three slots. It gives a small, hard-wearing badge that is folded once and worn as it is.Who it suitsA practical choice for crew and steward passes, trade counters and repeat-visit events where the same badge is worn several days running.How it comparesThe ExpoBadge T180T is the full 134 mm height. If price matters more than tear resistance, the ExpoBadge T180S is the same size on FSC-certified paper.SpecificationManufacturer part number25350974Our product codeEXP-25350974ModelExpoBadge T180TSBadge size96.5 x 82 mmSlotsThree slotsStockTear resistantAdhesive backingNoneFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£173.48
Inc Tax:£208.18
Brand: Expobadge
Model: EXP-25350976
ExpoBadge T180T (25350976) is a 96.5 x 134 mm tear-resistant butterfly badge with no adhesive backing and three slots. You get the durability of tear-resistant stock in a badge that has no adhesive layer to hold the folded halves together.Who it suitsSuits multi-day exhibitions and outdoor events where badges take heavy wear and the organiser prefers a non-adhesive badge.How it comparesThe ExpoBadge 260T is the tear-resistant full-size badge in the 260 series. For a compact tear-resistant badge with no adhesive, see the ExpoBadge T180TS.SpecificationManufacturer part number25350976Our product codeEXP-25350976ModelExpoBadge T180TBadge size96.5 x 134 mmSlotsThree slotsStockTear resistantAdhesive backingNoneFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£200.97
Inc Tax:£241.16
Brand: Expobadge
Model: EXP-25350983
ExpoBadge T180 (25350983) is a full-size 96.5 x 134 mm butterfly badge on FSC-certified paper, with no adhesive backing and three slots. Leaving out the adhesive layer is what the range offers as its more sustainable choice: the badge is paper only.Who it suitsPick the T180 when your event has sustainability commitments, or a venue or sponsor asks for certified materials, and you still want the full-size layout.How it comparesThe ExpoBadge T180S is the compact 82 mm version on FSC paper. If you need tear resistance as well as no adhesive, the ExpoBadge T180T is the same size.SpecificationManufacturer part number25350983Our product codeEXP-25350983ModelExpoBadge T180Badge size96.5 x 134 mmSlotsThree slotsStockFSC certified paperAdhesive backingNoneFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£164.97
Inc Tax:£197.96
Brand: Expobadge
Model: EXP-25350985
ExpoBadge T180S (25350985) is the compact 96.5 x 82 mm badge on FSC-certified paper, with three slots. It is usually the most economical pack of 500 in the ExpoBadge range we stock, which makes it a sensible default for high-volume events where each badge is worn once.Who it suitsGood for open days, school and university events, sustainability-led conferences and large free-entry shows where you are printing thousands of badges.How it comparesFor the full 134 mm height on FSC paper, choose the ExpoBadge T180. If badges need to cope with rough handling, the ExpoBadge 260TS is the same size in tear-resistant stock.SpecificationManufacturer part number25350985Our product codeEXP-25350985ModelExpoBadge T180SBadge size96.5 x 82 mmSlotsThree slotsStockFSC certified paperAdhesive backingNoneFormatFanfold, pack of 500PrinterEpson CW-C4000e..
£106.37
Inc Tax:£127.64
Showing 1 to 12 of 12 (1 Pages)