Events & Hospitality

ExpoBadge 260S (25350908) is the compact member of the 260 family: 96.5 mm wide but only 82 mm tall, with three slots along the top edge. It folds on the perforation to give a printed front and back, using less stock per badge than the full-height 260 while keeping the width that lets a full name sit on one line.Who it suitsGood for internal events, training days, visitor badges at reception and short networking sessions, where a smaller badge looks tidier and the details are limited to name, organisation and perhaps a colour band.How it comparesThe ExpoBadge 260TS is this same 96.5 x 82 mm size on tear-resistant stock. For FSC-certified paper in the compact size, look at the ExpoBadge T180S.SpecificationManufacturer part number25350908Our product codeEXP-25350908ModelExpoBadge 260SBadge size96.5 x 82 mmSlotsThree slotsStockStandardAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..

The ExpoBadge 260 (part number 25350911) is the standard full-size butterfly badge in the range and the one most events start with. Each label measures 96.5 x 134 mm and folds along its horizontal perforation, so one print gives a badge that reads the same from the front and the back. Three pre-cut slots across the top take a clip, a lanyard hook or a pin, so you can change how delegates wear their badge without changing stock.Who it suitsChoose the 260 for conferences, trade shows and AGMs where badges are worn for a day or two and you want plenty of room for a name, company, logo and QR code.How it comparesNeed it to survive an outdoor event or several days of wear? The ExpoBadge 260T uses the same 96.5 x 134 mm layout on tear-resistant stock. Handing out drinks or meal tokens? The ExpoBadge 260+ adds two tear-away vouchers. For a smaller badge, the ExpoBadge 260S cuts the height to 82 mm.SpecificationManufacturer part number25350911Our product codeEXP-25350911ModelExpoBadge 260Badge size96.5 x 134 mmSlotsThree slotsStockStandardAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge 260+ (25350912) takes the full-size 96.5 x 134 mm butterfly badge and adds two tear-away vouchers, so the badge doubles as a ticket. Print the delegate name on the badge and a drink, lunch or session entry on each voucher in the same pass, then tear them off at the bar or the door. Three slots at the top accept a clip or lanyard fitting.Who it suitsIt suits gala dinners, exhibitor parties and conferences with catering included, where separate paper tickets go missing and slow down the queue.How it comparesIf you do not need vouchers, the ExpoBadge 260 is the same size without them and costs less per pack. For a badge that copes with heavier handling, see the tear-resistant ExpoBadge 260T.SpecificationManufacturer part number25350912Our product codeEXP-25350912ModelExpoBadge 260+Badge size96.5 x 134 mmSlotsThree slotsStockStandardAdhesive backingYesVouchersTwo tear-away vouchersFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge 260T (25350920) keeps the full 96.5 x 134 mm butterfly layout and three slots of the standard 260 but is made from tear-resistant stock, so badges stay intact after being clipped, unclipped, pocketed and rained on across a multi-day show. It prints and folds exactly like the standard badge.Who it suitsPick it for outdoor festivals, site open days, sports fixtures and anything running over several days, where a torn badge at the gate means a reprint and a queue.How it comparesIf your badges hang from a single lanyard hook, the ExpoBadge 260T-EU has the same tear-resistant stock with one Euro slot instead of three. For a tear-resistant badge with no adhesive backing, see the ExpoBadge T180T.SpecificationManufacturer part number25350920Our product codeEXP-25350920ModelExpoBadge 260TBadge size96.5 x 134 mmSlotsThree slotsStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge 260TS (25350921) combines the compact 96.5 x 82 mm size with tear-resistant stock and three slots. It is the badge to use when you want the smaller footprint of the 260S but need it to last through handling, weather or a long event.Who it suitsUseful for volunteers, stewards and marshals at outdoor or multi-day events, and for site visitor passes that are clipped on and off repeatedly.How it comparesThe standard-stock version is the ExpoBadge 260S, which costs less if durability is not a concern. For the same compact size with no adhesive backing, see the ExpoBadge T180TS.SpecificationManufacturer part number25350921Our product codeEXP-25350921ModelExpoBadge 260TSBadge size96.5 x 82 mmSlotsThree slotsStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge 260TC (25350922) is the smallest badge in the range at 86 x 54 mm, standard credit card size, made from tear-resistant stock with a single Euro slot. It folds on its perforation like the larger ExpoBadges, giving a compact two-sided badge that is quick to print in large numbers.Who it suitsIdeal for visitor and staff passes, and for crew or exhibitor-only areas where the badge carries a name and a role rather than a full delegate profile.How it comparesThe ExpoBadge 260TCN is the same 86 x 54 mm tear-resistant badge with no slot, for use in a holder or pouch. For more print area with the same Euro slot, step up to the ExpoBadge 260T-EU.SpecificationManufacturer part number25350922Our product codeEXP-25350922ModelExpoBadge 260TCBadge size86 x 54 mmSlotsSingle Euro slotStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge 260TCN (25350923) is an 86 x 54 mm tear-resistant butterfly badge, the smallest size in the range and standard credit card size, with no slots at all. Without a cut-out the whole face is printable, which makes it the cleanest option when the badge goes into a holder, sleeve or pouch rather than hanging from a fitting.Who it suitsIdeal for visitor and staff passes when your site already uses card holders or lanyard pouches and you only need the printed insert.How it comparesIf you want to hang it straight from a hook, the ExpoBadge 260TC is the same size with a Euro slot. The next size up is the 96.5 x 82 mm ExpoBadge 260TS, which has three slots.SpecificationManufacturer part number25350923Our product codeEXP-25350923ModelExpoBadge 260TCNBadge size86 x 54 mmSlotsNo slotsStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge 260T-EU (25350940) is a tear-resistant 96.5 x 134 mm butterfly badge with a single Euro slot, the hanger-shaped cut-out you see on retail packaging. With one fitting point the badge hangs straight from a lanyard hook or clip instead of choosing between three slots.Who it suitsIt is the one to choose when your badges are issued on hooked lanyards as standard, as at many larger exhibitions and international conferences where Euro-slot fittings are the norm.How it comparesThe ExpoBadge 260T is the same stock and size with three slots for more fitting options. For a small, card-sized badge with a Euro slot, see the ExpoBadge 260TC.SpecificationManufacturer part number25350940Our product codeEXP-25350940ModelExpoBadge 260T-EUBadge size96.5 x 134 mmSlotsSingle Euro slotStockTear resistantAdhesive backingYesFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge T180TS (25350974) is the compact 96.5 x 82 mm version of the T180T: tear-resistant, no adhesive backing, three slots. It gives a small, hard-wearing badge that is folded once and worn as it is.Who it suitsA practical choice for crew and steward passes, trade counters and repeat-visit events where the same badge is worn several days running.How it comparesThe ExpoBadge T180T is the full 134 mm height. If price matters more than tear resistance, the ExpoBadge T180S is the same size on FSC-certified paper.SpecificationManufacturer part number25350974Our product codeEXP-25350974ModelExpoBadge T180TSBadge size96.5 x 82 mmSlotsThree slotsStockTear resistantAdhesive backingNoneFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge T180T (25350976) is a 96.5 x 134 mm tear-resistant butterfly badge with no adhesive backing and three slots. You get the durability of tear-resistant stock in a badge that has no adhesive layer to hold the folded halves together.Who it suitsSuits multi-day exhibitions and outdoor events where badges take heavy wear and the organiser prefers a non-adhesive badge.How it comparesThe ExpoBadge 260T is the tear-resistant full-size badge in the 260 series. For a compact tear-resistant badge with no adhesive, see the ExpoBadge T180TS.SpecificationManufacturer part number25350976Our product codeEXP-25350976ModelExpoBadge T180TBadge size96.5 x 134 mmSlotsThree slotsStockTear resistantAdhesive backingNoneFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge T180 (25350983) is a full-size 96.5 x 134 mm butterfly badge on FSC-certified paper, with no adhesive backing and three slots. Leaving out the adhesive layer is what the range offers as its more sustainable choice: the badge is paper only.Who it suitsPick the T180 when your event has sustainability commitments, or a venue or sponsor asks for certified materials, and you still want the full-size layout.How it comparesThe ExpoBadge T180S is the compact 82 mm version on FSC paper. If you need tear resistance as well as no adhesive, the ExpoBadge T180T is the same size.SpecificationManufacturer part number25350983Our product codeEXP-25350983ModelExpoBadge T180Badge size96.5 x 134 mmSlotsThree slotsStockFSC certified paperAdhesive backingNoneFormatFanfold, pack of 500PrinterEpson CW-C4000e..

ExpoBadge T180S (25350985) is the compact 96.5 x 82 mm badge on FSC-certified paper, with three slots. It is usually the most economical pack of 500 in the ExpoBadge range we stock, which makes it a sensible default for high-volume events where each badge is worn once.Who it suitsGood for open days, school and university events, sustainability-led conferences and large free-entry shows where you are printing thousands of badges.How it comparesFor the full 134 mm height on FSC paper, choose the ExpoBadge T180. If badges need to cope with rough handling, the ExpoBadge 260TS is the same size in tear-resistant stock.SpecificationManufacturer part number25350985Our product codeEXP-25350985ModelExpoBadge T180SBadge size96.5 x 82 mmSlotsThree slotsStockFSC certified paperAdhesive backingNoneFormatFanfold, pack of 500PrinterEpson CW-C4000e..

Our Best Selling Eco-Friendly Name Badge Display Tray is lightweight, cost-effective and easy to transport. Completely recyclable at the end of life! Ensure your cards and name badges look professional and save time by sorting them in our cardboard badge display trays.   Lightweight, crisp white cardboard design Each tray holds 50 badges of any size Takes minutes to set up  Register delegates quickly and efficiently Keeps your delegate names confidential Stays tidy and takes up less space than laying badges on the desk Flat pack for easy shipping, transportation, and minimal storage when not in use Can be used multiple times Low-cost, smart solution ..

About the Evolis Badgy 200 ID Card Printer Overview of the Badgy200 Card Printer The Badgy 200 is an entry-level, single-sided ID card printer built for organisations with small, regular print runs rather than high-volume production. It produces professional, edge-to-edge PVC cards carrying photos, text, logos, and barcodes. Its quick setup and intuitive interface ensure that no specialist training is needed to get started. Please note: this listing is for the printer only. Ribbons and blank cards aren't included; add compatible consumables to your order before you check out, so that you're ready to start printing the moment your Badgy 200 printer arrives. Evolis Badgy 200 is ideal for printing a variety of ID cards, such as: Employee badges Student IDs Membership cards Loyalty cards Event passes Business cards How It Works Badgy 200 installs and runs like a standard office printer. Cards load into the feeder and come out through the output hopper, both at the front of the printer, so there's nothing awkward to thread through or configure. Ribbons click into place and are automatically recognised, no manual setup required. Evolis Badge Studio software comes included, giving you a working design tool from the moment it's set up, and a free template library is also available online if you'd rather start from a ready-made design than build one from scratch. Speed and Capacity The Badgy 200 prints up to 95 colour cards per hour, or a single card in around 38 seconds, at 300 dpi resolution. The input feeder and output hopper each hold 25 cards. They're sized for printing on demand and small batches rather than running large overnight batches; load what you need, print it, and top up again for the next run. Built for a Desk, Not a Print Room At 147mm x 200mm x 276mm and 1.7kg, this ID card printer is smaller than an A4 sheet of paper and light enough to move between desks if needed. The size means that this won't clutter up the workspace, and the design means that everything happens at the front of the printer (loading and unloading cards), so this printer is an excellent choice if you need an ID card instantly but don't want a printer that needs a dedicated space or entire desk. It connects over USB and runs on Windows and Mac, so it fits straight into most existing office setups, and thanks to an easy-to-use interface, printing badges as you need them is as straightforward as printing on a normal printer. Features and Benefits Direct-to-card dye-sublimation and resin thermal transfer printing Single-sided, edge-to-edge printing 300dpi resolution Print speeds up to 95 full-colour cards/hour 25-card input feeder, 25-card output hopper USB connectivity Compatible with Windows and Mac Dimensions: 147mm (H) x 200mm (W) x 276mm (D) Weight: 1.7kg 2-year warranty Includes Evolis Badge Studio design software Don't Forget Your Consumables To..

10mm Bamboo Lanyard with Metal Lobster Clip Pack Size:  100 lanyards Colour:  White Part Number:  06-1012-WHThese 10mm lanyards are made from bamboo fibre, a natural material that's biodegradable and sustainable. They're soft against the skin while still holding up to daily wear the same way our polyester lanyards do. It comes in white, with a metal lobster clip for attaching a card holder or badge, and is sold in packs of 100.Why Choose Bamboo Over Standard PlasticBamboo takes a different route to being eco-friendly than our recycled polyester lanyards. RPET repurposes existing plastic that would otherwise end up in landfill. Bamboo avoids adding new plastic in the first place. It's a renewable natural material that's environmentally friendly, grows quickly and breaks down naturally at the end of its life, rather than lingering in the environment the way synthetic fibres can.That makes it a strong fit for organisations with a sustainability focus like environmental charities, eco-conscious events, or any business that wants its everyday supplies to reflect its values rather than just its branding. We've worked hard to ensure that these eco-friendly lanyards are as durable as the rest of our options too. So you can be confident that your team can wear these lanyards daily without you needing to order more all the time.   ..

HiTi CS-200e Single-Sided ID Card Printer Overview The HiTi CS-200e is a direct-to-card dye-sublimation printer built for organisations that print staff ID, visitor passes, student cards and access control credentials in-house. It is compact enough for a desk, straightforward to run and modular enough to grow with your card programme. Print quality and speed The CS-200e uses dye-sublimation for full-colour output and thermal transfer for monochrome, both at 300 dpi continuous tone. Continuous tone means colours blend smoothly across the card surface rather than breaking into visible dots, so photos and gradients look clean at card size. Edge-to-edge printing covers the full CR-80 card face with no white border. A full-colour YMCKO card prints in approximately 21 seconds. Switch to resin black and the CS-200e completes a card in approximately 4.5 seconds, which is useful when you need to issue a large batch of single-colour passes quickly. The YMCKO ribbon yields up to 400 prints per roll; the half-panel YMCKO variant stretches to 560 prints by using shorter panels, which makes sense for cards where the photo only covers part of the card. A resin black ribbon covers 1,000 prints. Card handling and compatibility The printer accepts standard CR-80 cards (53.98 × 85.6 mm) in PVC or polyester with a polished PVC finish, at thicknesses from 0.25 mm to 1.00 mm. The 100-card input hopper keeps the printer running without constant attention, and the 50-card output hopper collects finished cards neatly. The CS-200e connects via USB and runs on Windows 7 or later, including Windows 11, as well as macOS v.10.6 or above. The bundled CardDesiree CS design software is Windows-only. If you are on Windows 11 in S Mode, deactivate S Mode before installing it. Optional encoding and duplex modules Dual-sided printing. An optional flipper module adds automatic two-sided printing. You buy the base printer as a single-sided ID card printer and fit the module when your card design requires a reverse side. Encoding. For access control or smart-card programmes, three encoding modules are available as field-upgradeable additions: a magnetic stripe module (ISO 7811 Hi-Co and Lo-Co), a contact smart card module, and a contactless RFID module covering ISO 14443A/B, ISO 15693, MIFARE and HID iCLASS formats. Each module fits the existing chassis without sending the printer away for modification. High-capacity hopper. An optional 400-card input hopper is also available for higher-volume runs. Ribbons, cards and the bundle option The CS-200e takes its own ribbon format. Plastic-ID stocks the full range of HiTi CS-200e ribbons, including YMCKO full-colour, monochrome black, gold, silver and white options. If you need card stock, plain white PVC cards in CR-80 format are available in 480 and 760 micron packs of 100. If you want to start printing immediately, the HiTi CS-200e bundle ships with the printer, a 400-print YMCKO ribbon, 400 plain white cards and CardE..

20mm Double-Ended Lanyards with Metal Trigger Clips – Pack of 100 Upgrade your ID display setup with our 20mm Plain Double-Ended Lanyards, designed for comfort, durability, and secure attachment. These double clip lanyards are ideal for holding badge holders and large ID cards at events and conferences, ensuring the user is comfortable throughout the day while their identification is clearly displayed. Key Features Pack Size: 100 lanyards Made from durable, high-quality polyester for long-term use Two sturdy 2mm metal trigger clips – ideal for vinyl wallets, XL ID badges, or dual-hole card holders Comfortable 90cm total length (approx. 45cm drop from the back of the neck) Health & Safety Breakaway: Quick-release mechanism for wearer protection Metal clips suitable for 3mm or greater hole punches Numerous colours available with next working day delivery on in-stock options Free delivery on UK orders over £150 These lanyards with double clips provide a secure and professional way to display identification. Choosing 20mm rather than 10mm ensures that the lanyard looks and feels right throughout daily use in any environment, from corporate offices to educational institutions...

10mm Purple Lanyards with 3 Health and Safety Breakaways These plain purple lanyards are built for a specific safety requirement that most standard lanyards don't meet. They have three breakaway points rather than the usual one or two. They are engineered so that if it's pulled or snagged, there are three fail points, so the lanyard falls away from the neck safely rather than trapping the person. In mental health, secure care, and other high-security settings, as well as industries operating heavy machinery, where the risk of a lanyard getting caught, trapped or grabbed, these lanyards keep staff safe. It's 10mm wide and made from RPET (recycled polyester), in purple and includes a metal J clip for an ID card holder and three plastic breakaway clips. The minimum order quantity for these plain lanyards is 10 lanyards, with packs of 100 available on request if you are kitting out your entire team. Get The Rest of Your ID Card Accessories Here Along with lanyards, we stock a wide range of ID card holders, badges, access control cards and more, as well as pre-printed lanyards for staff, visitors, contractors and volunteers. Explore the rest of our range to get all of your ID card accessories delivered quickly...

Matica XL8300 Oversized XL Card Printer Designed with the event industry in mind for the production of personalised event passes, badges and accreditation Printing and encoding oversized cards Easy to use and maintain Robust printer with metal chassis Excellent print quality 300 dpi retransfer full-colour printing Print over 120 cards per hour 100 card feeder and 100 card output hopper Secure UV printing Option to upgrade for contactless card encoding About the Matica XL8300 Oversized XL Card Printer Standard CR80 cards run out of room fast when a pass needs to carry accreditation detail, event branding and a security feature all at once.The XL8300 fixes that by printing oversized 85.6mm x 124mm cards, the largest print area of any ID card printer on the market. That extra space means a single pass can hold full accreditation information and branding without either one getting squeezed.Print quality holds up at 300 dpi full-colour retransfer, so cards can be styled for anything from a corporate ID badge to a full festival pass. Add UV printing with UV-compatible ribbons for a visible security layer, or upgrade to contactless encoding where the card also needs to control access, and the result is a pass that looks right and does its job at the door.That combination of size, print quality and security options makes the XL8300 useful well beyond events too. Any business needing an oversized identification card benefits from the extra space, whether that's staff ID, visitor passes or contractor credentials. For concerts, sporting events, festivals, conferences and exhibitions specifically, it means one pass can carry everything an accreditation team needs without cramming it onto a credit-card sized ID cards. VIPS Backstage Passes Organisers Contractors Catering Staff Security Personnel First Aiders Athletes and Sportspeople Speakers Presenters Musicians   Please note printers are not supplied with a ribbon, so don't forget to add one to your cart. Matica XL8300 Technical Specifications Printing Technology: Dye Sublimation/Thermal Transfer - Retransfer Print Quality: 300 dpi Speed: - Up to 85 cards per hour (YMCKO) - Up to 128 cards per hour (Monochrome) Card Format:  - 124mm x 85.6mm (4.88inch x 3.37inch) - Thickness: 0.25 - 1.02mm  (hopper adjustment required)  Card Materials - ABS, PET or PVC Feeder: 100 cards (0.76mm) Output Hopper: 100 cards (0.76mm)Interface specs: USB 2.0 and Ethernet Operating Systems: Windows 7, 8, 10 (32 & 64 bits) Interface: USB 2.0 and Ethernet Dimensions (inc feeder and hopper): 549mm (width) x 322mm (length) x 411mm (height) Encoding Options: Contactless ChipDimensions: 549 x 322 x 411mm (WxDxH, including oversized card feeder and hopper)Weight: 15.6kg 36-month warranty on printe..

Pack Size: 25 lanyards ID Card Centre Part Number: 06-1005 About 10mm Plain Lanyard with Metal Dog Clip These 10mm wide flat, tubular polyester lanyards feature a metal dog clip attachment, a health and safety breakaway, and are available in the following 11 colours:          Lanyard Colour           Pantone Reference           Product Code Black    06-1005-BK Dark Green 3435C 06-1005-DG Light Green 356C 06-1005-LG Navy Blue 655C 06-1005-NB Orange 021C 06-1005-OR Purple 2685C 06-1005-PU Red 1797C 06-1005-RD Royal Blue 286C 06-1005-RB White   06-1005-WH Yellow 109C 06-1005-YW Pink 212C 06-1005-PI..

10mm Plain Lanyard with Plastic Dog Clip Pack size: 25 Lanyards Manufacturer Part Number: 06-1000 About 10mm Plain Lanyard with Plastic Dog Clip 10mm wide flat, tubular polyester lanyards with plastic dog clip attachment and a health and safety breakaway. Available in the following 10 colours.        Lanyard Colour        Plastic Fitting Colour        Pantone Reference        Product Code Black Black   06-1000BK Dark Green Black 341C 06-1000DG Light Green Black 357C 06-1000LG Dark Blue Black   06-1000DB Orange Black Orange C 06-1000O Purple Black 2665C 06-1000P Red Black 1797C 06-1000R Blue Black 286C 06-1000RB White White   06-1000W Yellow White 109C 06-1000Y  ..

Pre-printed CONTRACTOR Lanyards with Metal Lobster Clip Pack Size: 100 Lanyards Manufacturer Part Number: 06-1110-MET Available Colours: Yellow or Red This 15mm flat polyester lanyard is pre-printed with "CONTRACTOR" in white text on red, or black text on yellow, for quick, easy identification of your contractors on site. A metal lobster clip attaches ID cards, access control cards, a mobile phone or a set of keys, and a health and safety breakaway is fitted as standard, so if it ever gets caught or pulled, it releases safely, then clips straight back together.Metal lobster clips suit environments where the lanyard could get caught in machinery or handled roughly throughout the day, because they hold up better than a plastic clip under that kind of daily wear. It's a practical, no-fuss way to identify contractors on a busy site without the cost of a fully custom print run. We also stock ID card holders in landscape and portrait formats, enclosed holders with locking mechanisms for extra security, and flexible vinyl wallets - everything you need to complete your contractor ID setup in one order. About our pre-printed lanyards: Cost-effective alternative to personalised lanyards High-quality, professional finish Comfortable to wear Durable Health & safety breakaway fitted as standard - breaks apart if pulled or caught and easily clips back together. Next working day delivery FREE delivery on orders over £100!..

20mm Plain Metallic Lanyards Silver and gold lanyards - add a glamorous sheen to your ID! Pack Size:  25 lanyardsThis 20mm lanyard is made from flat-weave polyester with a smooth, metallic finish, available in gold, silver, or bronze and fitted with a metal clip and a health and safety breakaway. If it ever gets caught or pulled, it releases safely, then clips straight back together.Every other plain lanyard we stock is really about practical colour-coding, telling people apart at a glance. This one's different. A gold or silver lanyard adds a touch of polish to an awards ceremony, a VIP area, a product launch or any event where presentation matters as much as identification. Bronze offers the same premium finish with a warmer, more understated tone if gold feels too bold for the occasion.Whichever you choose, you'll be adding a sign of quality to your event without the longer lead times of custom printed lanyards. Not sure which colour you need for your event? Get in touch with our team, and we'll help you choose the perfect design. We also stock ID card holders and access control cards to complete the look, so your VIP guests or top-tier staff get an ID setup that matches the occasion...

20mm Plain Lanyards with Card Holder - Pack of 10Premium lanyards and cardholders in a range of bright, vibrant colours perfect for matching to your brand colours. Durable, high-quality polyester lanyards Lanyards are available in 21 colours Card Holders available in 14 colours Comfortable to wear Health and safety breakaway 90cm total length Card Holder included to display your ID card and attach to your lanyard Next working day delivery and free delivery on orders over £150! This 20mm polyester lanyard comes as a matched set with an ID card holder already included, so there's no separate holder to source or match up afterwards. A metal trigger clip and black plastic health and safety breakaway are fitted as standard, releasing safely if it's ever caught or pulled, then clipping straight back together.With 21 colours of lanyards available and 14 colours for ID badge holders this is one of the widest ranges we stock so if you're colour-coding several departments, roles, or event teams and want every lanyard and holder to match without placing separate orders for each, this is the range for you. Buying the set also means one supplier, one delivery, and a consistent look from the moment it's unboxed, rather than pairing a lanyard from one place with a holder from another and hoping the fit and finish line up. We also stock badge reels and blank ID cards if your workplace setup needs even more. About Plain Lanyards with Card Holders Lanyards: The lanyard measures 90cm in total length, so the drop length from the back of the neck is approximately 45cm. The trigger clip is 2mm thick, so suitable for any holes 3mm or greater. All of our plain lanyards with card holders are available for next working day delivery in the UK and if your order is over £150, then delivery is free!                  Lanyard Colour         Pantone Reference     Product Code Aubergine 519C 06-1006-AU Black    06-1006-BK Brown 476C 06-1006-BN Coral 170C 06-1006-CO Green 341C 06-1006-GN Fluorescent Yellow 809C 06-1006-FY Grey 427C 06-1006-GY Light Blue 297C 06-1006-LB Blue 286C 06-1006-BL Mineral Green 5783C 06-1006-MG Navy Blue 655C 06-1006-NB Neon Green 802C 06-1006-NG Orange 021C 06-1006-OR Pastel Pink 250C 06-1006PK-P Pink 212C 06-1006-PK Purple 2685C 06-1006-PU Red 1797C 06-1006-RD Robin Egg Blue/ Turquoise  631C 06-1006-TQ Watermelon 192C 06-1006-WM White   06-1006-WH Yellow 109C 06-1006-Y..

20mm Plain Lanyards - Pack of 25 Premium lanyards in a range of bright, vibrant colours! Pack size:  25 lanyards  Durable, high-quality polyester Available in 21 colours Comfortable to wear Health and safety breakaway 90cm total length20mm width Next working day delivery and free delivery on orders over £150! This is a really versatile lanyard thanks to the 21 colours available. They're 20mm polyester and have a metal trigger clip and a health and safety breakaway that releases cleanly if it's ever caught or pulled, then clips straight back together. At 90cm total length with a 45cm drop, it sits comfortably for a full day's wear, and the 2mm clip fits any card holder or badge with a hole of 3mm or larger.Pick from a wide spread of vibrant colours to build your own ID system that suits your brand or event perfectly. Whether you're choosing one colour per department, one per role, or one per site, we have a colour option for you. We also stock ID card holders and badge reels, as well as blank ID cards to pair with them, so your whole ID setup comes from one order...

About our 20mm Reflective Hi-Vis Lanyards - Pack of 25 Be bright, be seen, be safe! Pack size: 25 lanyards  Durable, high-quality polyester Available in 7 colours Comfortable to wear Health and safety breakaway 90cm total length Next working day delivery and free delivery on orders over £150! About 20mm Reflective Hi-Viz Lanyards The reflective stripe running down the centre catches light in the dark, making these a safe, useful, low-cost option for night workers, runners, and anyone at an outdoor or evening event where being seen matters as much as being identified. The health and safety breakaway releases cleanly if it's ever caught or pulled, then clips straight back together, and the metal trigger clip fits any card holder or badge with a hole of 3mm or larger.If you'd rather have your own branding on a reflective lanyard, we also stock a personalised version with your logo or design. We also stock ID card holders, badge reels, and blank ID cards to pair with these, so your whole setup is taken care of. All of our plain lanyards are available for the UK's next working day delivery and if your order is over £150, then delivery is free!   Lanyard Colour Product Code Purple 06-1006-HVPU Bright Pink 06-1006-HVPK Blue 06-1006-HVB Fluorescent Orange 06-1006-HVO Fluorescent Yellow 06-1006-HVY Red 06-1006-HVR Green 06-1006-HVG  ..

The 2XL 2.0 card printer for oversized cards is a successful development and can offer a variety of new features that make working with it even faster, easier and more efficient. With the 2XL 2.0 card printer, the third generation of the overprint card printers will be launched, and the new 2XL 2.0 card printer will now also feature improved plug and play drivers for Windows and Mac, as well as the proven sublimation printing technology that ensures excellent print quality for your plastic cards. There is also a standard USB port and an improved display for even simpler operation. The usual strengths of the XXL 2.0 printer are retained, especially its high printing speed, which allows you to print up to 180 color cards per hour or even an incredible 1,400 cards per hour in monochrome printing! And this performance miracle is also extremely quiet. With the 2XL 2.0 card printer, you have many options for printing large plastic cards: The pre-printed XXL cards are available in the sizes 124 x 88 mm or 140 x 88 mm. The customizable print is in the size of a credit card. Three possible positioning options are available for your individual content: center position, edge position at the bottom and edge position at the top. For double-sided printing, you have additional options. In addition, you can also provide these oversized cards with encoding for a contactless chip in the same operation. Large format credentials for sports tournaments, concerts or many other events can be designed simply and professionally with the 2XL 2.0 card printer. Within a short time, you can equip all visitors of your events with high-quality and practical oversized credentials, thus optimally combining security and marketing!..

The 2XL+ - the Accreditation Printer Ideal for creating personalised event passes, badges and accreditation Easy to use 5 print positions It's fast!  Up to 180 for full colours or 1400 monochrome cards per hourInput feeder holds 100 cards, output hopper holds 50 Print on two card sizes: 124.8 x 88 mm, 140.0 x 88 mm 300dpi dye-sublimation/thermal printing Compact and lightweight (5.2 kgs) Plug-and-play driver for Windows and Mac Standard USB Option for contactless chip encoding Two Year Warranty The 2XL+ brings large performance for large-size cards! The 2XL+ card printer uses dye sublimation and thermal printing to create professional events and oversized ID cards for international events such as sporting events, concerts, and fairs. Its ideal for producing passes, including VIP and backstage passes and official accreditation for performers, participants and organisers. The 2XL+’s fast print speed, low noise level, compact and lightweight design and ease of use make it the ideal events printer. Printing up to pre-printed 180 cards per hour in full colour or 1,400 monochrome cards per hour, on-site personalisation of passes is now a real possibility. The 2XL+ is also extremely economical, being among the least expensive in its class.  Two sizes of pre-printed cards can be used in the 2XL+ printer, and with five selectable printing positions, this gives great flexibility to the overall design of the cards. Furthermore, if contactless chip encoding is required, this can also be done using this printer.   2XL+ Technical Specifications Printing Technology: Dye Sublimation/Thermal Transfer Interface: USB 1.1 (compatible with USB 2.0) Ribbons: Five segment colour ribbons (YMCKO) for printing 200 card sides. Monochrome black ribbon (K) for printing 2000 card sides. Further monochrome ribbons with the colours: white, blue, red, green, silver, and gold. Print Quality: 300 dpi Speed: 180 cards per hour (YMCKO) 1400 cards per hour (Monochrome) Card Formats: 124mm x 88mm (4.88inch x 3.46inch) 140mm x 88mm (5.51inch x 3.46inch) Card Thickness: From 0.25mm to 1.0mm (10mil~40mil) Feeder: 100 cards (0.76mm / 30mil thickness) Output Hopper: 50 cards (0.76mm / 30mil thickness) Operating Systems: Windows 2000, XP, Vista, Windows 7 (32/64-bit), Windows 8 (32/64-bit), Mac OS 10.5-10.8 Dimensions (without feeder and hopper): 197.8mm (Width) x 354mm (Length) x 204 mm (Height) Encoding Options: Contactless (RFID) encoder module Further Options: Network Connection Weight: 5.2 kg / 11.4 lbs (options not included) Warranty: 2 years Please note printers are not supplied with a ribbon, so don't forget to add one to your cart...

Each A4 sheet in this pack is pre-perforated into four A6 sections, so a laser printer can run off a full page of visitor passes or event badges in one pass, then each one tears away cleanly along the perforation rather than needing a guillotine or scissors. It's built specifically for batch printing ahead of an event: print, tear and slot straight into an oversized A6 badge wallet without any trimming in between. This saves time on long print runs before an event while making sure every guest has a pass. Order yours before 2:30 pm and enjoy next-day delivery so you never miss an event. Each sheet is 120gsm, sold in packs of 25 A4 sheets (100 A6 inserts). It's designed for laser printers and takes colour or monochrome inks really well, giving richer colours on your event passes. FAQs Will the perforation tear cleanly once printed? Yes, the perforation is designed to separate cleanly by hand once each A6 section has been printed or before. There's no cutting required. Does this fit any A6 badge holder? It's designed for use with oversized A6 badge wallets specifically. If you're using a different holder size, check with us before ordering to make sure the fit is right. Can I print on both laser and inkjet printers? This perforated A4 paper is designed for laser printers, so its performance in inkjet printers cannot be guaranteed. Orders placed before 2:30 pm for stock items are dispatched the same day and we offer a price match guarantee if you find it cheaper elsewhere...

About the Matica XL8300 Oversized XL Card Printer | Rental 7-Day Rental (from delivery to collection) Printing and encoding your own oversized cards on site Easy to use and maintain  Robust printer with metal chassis  Excellent print quality 300 dpi retransfer full-colour printing 300 dpi retransfer full-colour printing Card size: 85.6mm x 124mm cards/badges Print over 120 cards per hour 100 card feeder and 100 card output hopper Secure UV printing with compatible ribbons Includes durable flight case  The XL8300 is a robust, high-print-quality printer for producing passes, badges and cards, predominantly for the event industry but ideally suited to any business needing oversized identification cards. Standard CR80 (credit card) size cards often are not large enough to hold the wealth of information required on event and accreditation passes whilst also allowing for bespoke branding and event details. With the largest print area on the market, and the further ability to add secure UV printing and contactless encoding, you can produce high-level security passes for identification and access control purposes that also look great! Oversized cards are ideal for all kinds of event badges and pass, including concerts, sporting events, festivals, conferences and exhibitions. Please allow a minimum of 24 hours following the return of your rental agreement for dispatch. Our minimal rental period per printer is 7 days. If you want a more extended period or need to hire more than one printer, change the quantity to affect the rental period the printer is required for and add a note to the checkout. Ribbons are not supplied, so don't forget to add one to your cart!  Please note that we cannot always guarantee availability for these printers due to limited stock. Please get in touch with us before you order, should you need to confirm this before placing your order. ..

Matica XL8300 PVC XL Oversized Cards - Plain White - Pack of 250 Manufacturer Part Number: PR000088 Pack Size: 250 cards Card Size: 86mm x 124mm Card Thickness: 760 Micron, 30mil Format: Pre-Hole Punched to Short-Edge (Portrait) These cards are manufactured using 100% PVC, which ensures they are tougher and last longer than a cardboard composite or laminated card.   .recyclingbox{border-color:#032366;border:solid;border-width:5px;border-color:#032366;border-radius:200px;padding-right:5%;margin:auto;overflow:auto;max-width:740px}.recyclingsymbol{float:left;height:auto;width:150px;padding-right:5px}.recyclinginfo{padding-top:12px;font-family:Arial;font-size:14px}@media only screen and (max-width: 1199px){.recyclinginfo{padding-top:2%;font-size:12px}}@media only screen and (max-width: 991px){.recyclinginfo{padding-top:2%;font-size:1.5vw;padding-left:5%}.recyclingbox{border-radius:25px 50px}.recyclingsymbol{width:100px;height:auto}}@media only screen and (max-width: 500px){.recyclinginfo{padding:0px 4px 4px 25px;font-size:14px}.recyclingsymbol{height:auto;width:100px;float:none;margin:auto;display:block;padding-right:0px}.recyclingbox{height:auto;width:75%;border-radius:30px}}..

Pack Size: 100 Colours Available: Yellow, Blue, Green, Red, Grey, Pink, and Black. Insert Size: 110 x 60mm Ideal for: Door supervisors, security personnel, construction workers, fire marshalls, emergency services, event organisers, charity workers, and indeed anyone working in dangerous environments. Would you like these Hi-Viz armbands personalised with your company's branding e.g logos, customer text, icons? Please email us at sales@plastic-id.com or call us on 02037442333. More about Our Reflective ID Card Armband Holders Our reflective badge holders are ideal for use in professional organisations and are durable and waterproof for harsh outdoor environments. These have been designed with a transparent badge holder pouch so ID cards can be kept on the wearer whilst they partake in an activity, event, or night shift, and have been designed so that ID cards are easy to access and view.  These security armbands are worn for various purposes and are known to be widely used in the security industry as the SIA (Security Industry Authority) requires all licensed front-line operators to ensure that their licenses are visible at all times. Our armbands are suitable for individuals or contractors that are SIA licensed and 'fit and proper’ persons who have been properly trained and qualified for their job. Reflective armbands are versatile and can be used for a range of industries such as events and pro-active sports clubs and hobbies including events, cycling, and running. Hi-Viz armbands would be a more ideal option for those engaging in sports or working in high-risk environments like a construction site or manufacturing environment. For example, you could use an ICE (in case of emergency) tag alongside your armband to ensure you've got your vital medical details with you if an accident were to happen.  ..