Access Control

About EM4200 and MIFARE Classic EV1 1K combined technology White PVC Cards Product Code: EM4200M1K Pack size: 100 cards Material: PVC Personalisation: Can be printed with any plastic card printer.  If you would like us to print the cards for you please contact us for a quote. Applications: Access control, time and attendance, transport, print release, cashless vending     White PVC Standard credit card size and thickness (CR80, 30 mil) 128 bit 100 – 150 KHz frequency range Card memory: 1k Frequency: 13.56 MHz + 125khz 2-10cm reading distance RF protocol ISO11784/785 + ISO 11443 Temperature range: -40c to +85c Data storage up to 10 years The EM4200 is a proximity card containing a CMOS integrated circuit for use in electronic read-only radio frequency applications and combined with an NXP MIFARE chip for compatibility on dual systems. Each card has a two unique serial numbers which can be used to identify the card - one on 125khz frequency and another on 13.56mHz.  Alternatively, the chip within the card can be encoded. The cards are plain white PVC and therefore are suitable for monochrome or full colour personalisation to one or both sides, with the use of any plastic card printer.  If you would like us to take care of the printing, encoding or serial number capture of your cards then please contact us for a quote...

This NXP MIFARE DESFire EV1 2K card is featured with a genuine EV1 NXP chip with a full-quality card memory of 2k for those looking for a smart card with higher card memory - ideal for individuals wanting to utilise the NXP Mifare Desfire for multiple applications. Ensure your building's premises are secure with NXP's highly secure Mifare Desfire technology for access control systems and other applications such as cashless vending, clocking in and out, loyalty systems, and printing personalised ID cards or membership cards in-house.  Card Type: 13.56 MHz, ISO 14443A 100 Per Pack Manufacturer Code: MF3ICD21 Features: Plain White PVC Cards Contactless MIFARE® DESFire technology 13.56 MHz frequency 2k card memory 106 kbit/s data transfer 10 years data retention ITSO AccreFEATdited ISO 14443A No battery required Anticollision..

Card Memory: 2K Card Type: 13.56 MHz, ISO 14443A 100 Per Pack Manufacturer Code: MF3D2201 The NXP Mifare Desfire contactless smart card introduces new features and enhanced performance for an improved user experience. This card fully complies with the ISO requirements for fast and highly secure data transmission and flexible application management.  Using a capable ID card printer, you can apply full-colour graphics, including photos and custom line art such as barcodes, QR codes, and custom text. With a suitable direct-to-card printer, you can also apply other features such as a magnetic stripe and anti-counterfeiting security features to further enhance your card's security or prevent duplicate card copies. Features: Contactless interface compliant with ISO/IEC 14443-2/3 A Low Hmin enabling operating distance up to 100 mm Fast data transfer: 106 kbit/s 7 bytes unique identifier (option for Random ID) Uses ISO/IEC 14443-4 transmission protocol Configurable FSCI to support up to 128 bytes (256 bytes for 16 and 32 kB) frame size..

The NXP Mifare DESFire smart card technology is designed to suit the needs of multiple applications needing a secure contactless key card. Our NXP Mifare plastic card is suitable for access control, cashless vending, loyalty/rewards cards, and more. These cards can be personalised with line art such as barcodes, text, and full-colour images that can be applied onto the CR80 card to create high-quality identity cards, business cards, reward cards, event passes, etc., with an ID card printer. Card Type: 13.56 MHz, ISO 14443A 100 Per Pack Manufacturer Code: MF3ICD41 Features:  Plain White PVC Cards Contactless MIFARE® DESFire technology 13.56 MHz frequency 4k card memory 106 kbit/s data transfer 10 years data retention ITSO AccreFEATdited No battery required Anticollision..

HID's HID's 2124 iClass 32k + Prox Card effectively combines iClass technology with HID 125 kHz Proximity technology in one CR80 plastic card. The smart card's modern iClass technology is powerful, more versatile, and more secure and enables contactless smart card applications to be used for existing HID Prox access control systems. The iClass and proximity card can read or write contactless smart technology providing versatile interoperability in various applications including cashless vending, access control, network log-on security, biometric identification systems, loyalty systems, and event management.  This card is the same size as a credit card and has the thickness of an ISO standard card. Typical Maximum Read Range* R10 2.0-3.0" (5.0-7.6cm) R30/RW300 2.0-3.5" (5.0-8.9cm) R40/RW400 2.5-4.5" (6.3-11.4cm) RK40/RWK400 3.0-4.0" (7.6-10.1 cm) *Dependent upon installation conditions. Please note that the minimum order quantity is 100. Dimensions 2.127" x 3.375" x 0.033" max. (5.40 x 8.57 x 0.084 cm) Card Construction Thin, flexible polyvinyl chloride (PVC) laminate or Composite Polyester/PVC. Memory Type EEPROM, read/write Multi-application Memory 2k bit (256 Byte) card 2 application areas 16k bit (2K Byte) card 2 or 16 application areas 32k bit (4K Byte) card - 2+ 0r 16+ application areas Other HID dual technology cards include : 2020 for 2k bit (256 Byte) card 2021 for 16k bit (2k Byte) card with 2 application areas 2022 for 16k bit (2k Byte) card with 16 application areas 2023 for 32k bit (4k Byte) 16k/2+16k/1 2024 for 32k bit (4k Byte) 16k/16+16k/1..

HID Signo 40 Keypad Reader - Terminal Connection Manufacturer Part Number: 40KTKS-00-000000 The Signo reader is one of HID’s signature line of access control readers which provides high levels of security. With its HID Secure Identity Object (SIO) data model you can ensure your identity information is securely stored and transported in a single object. The reader’s support for HID’s iCLASS Elite and Corporate 1000 programs, is just one of the Signo’s excellent features like the ability to secure storage of cryptographic keys on secure element hardware. This Signo has all the qualities and specifications for environments needing an access control system to securely allow permitted individuals to access the premises of an organisation. HID is now taking technology a step further by enabling you to operate the reader via mobile with Bluetooth and NFC support.  Go mobile with Bluetooth and NFC support  Integrated 125 kHz credential read support for easy migration Highly secure authentication  Supports over 15 standard credential technologies  Compatible with iCLASS Elite™ and Corporate 1000 Programs Secure data authenticity and privacy  Specifications 2.4 GHz Credential Compatibility: 2.4 GHz (Bluetooth) Credential Compatibility 125 kHz Credential Compatibility: HID Proximity®, Indala Proximity®, AWID Proximity, and EM Proximity Mounting: Suited for mullion-mount door installations or any flat surface mounting Colour: Black bezel with silver trim baseplate Transmit frequency: 125 kHz, 13.56 MHz, and 2.4 GHz Warranty: Limited lifetime..

Dimensions: CR80 card 54mm x 85.7mm.   Thickness:  760 micron / 30 mil Pack Size: 100 Cards Type: Mag Strip, Proximity Cards, Printable PVC Cards Technology: Mag Stripe Frequency: Other Slot Punch: None Warranty: Lifetime warranty The RF programmable HID ISOProx II proximity access card offers proximity technology and photo ID on a single access control card. Manufacture code: HID 1386 ISOProx II Card HID Duoprox II Proximity and Magstripe Card - Programmed PVC gloss finish front Magstripe and white on rear Sequential Int/Ext numbering ISO printable card with a blank magstripe on reverse Graphics quality surface for use with direct image printers Same size and thickness as a standard credit card This is a custom product as a result we cannot accept returns unless the product is faulty and the turnaround time for this custom product is approximately 5-7 working days. We can provide an exact lead time on receipt of enquiry...

With the NXP MIFARE DESFire EV1 8K you can ensure your cards feature highly secure smart card technology and are made from premium quality plastic materials. The Mifare Desfire smart card's 8k card memory ensures your card can be used for several applications including cashless vending, access control, clock-in systems, loyalty systems, and much more. The smart card operates at a frequency of 13.56MHz and is able to process data quickly and efficiently. The cards have been manufactured using premium plastic materials to ensure your cards withstand the effects of daily card usage and increase the card's lifespan. Card Type: 13.56 MHz, ISO 14443A 100 Per Pack Manufacturer Code: MF3ICD81 Features: Plain White PVC Cards Contactless MIFARE® DESFire technology 13.56 MHz frequency 8k card memory 106 kbit/s data transfer 10 years data retention ITSO AccreFEATdited No battery required Anticollision..

100 Per Pack Card Memory: 4K Card Type: 13.56 MHz, ISO 14443A Manufacturer Code: MF3D4201DUD/01 The NXP Mifare Desfire contactless smart card introduces new features and enhanced performance for an improved user experience. This card fully complies with the requirements for fast and highly secure data transmission and flexible application management.  Using a capable ID card printer, you can apply full-colour graphics, including photos and custom line art such as barcodes, QR codes, and custom text. With a suitable direct-to-card printer, you can apply other features such as a magnetic stripe and anti-counterfeiting security features to further enhance your card's security or prevent unauthorised individuals from creating fraudulent card copies.  Features: Contactless interface compliant with ISO/IEC 14443-2/3 A Low Hmin enabling operating distance up to 100 mm Fast data transfer: 212 kbit/s 7 bytes unique identifier (option for Random ID) Uses ISO/IEC 14443-4 transmission protocol Configurable FSCI to support up to 128 bytes (256 bytes for 16 and 32 kB) frame size..

HID 2121 iCLASS has been created for diverse applications including but not limited to cashless vending, access control, biometric identification, retail loyalty systems, network log-on security, airline ticketing, transport ticketing, etc.  The proximity card successfully combines Wiegand technology with iCLASS 13.56 MHz contactless read/write technology to produce a single smart card to create a one-card solution that allows the user to easily transition from a Wiegand reader to HID iCLASS technology readers and the cards can be used for numerous applications.  Special features such as anti-counterfeiting watermarks, magnetic stripes, and barcodes can be applied to the card using a capable ID card printer. You can use most direct-to-card printers with this smart card to create attractive and branded cards such as staff and student photo ID cards, loyalty cards, gift cards, membership cards, event tickets, transport passes and so much more!   Manufacturer Part Number: HID-2120 Please note that the minimum order quantity is 100 Typical Maximum Read Range* R10 2.0"-3.0" (5.0 cm - 7.6 cm) R30/RW300 2.0" - 3.00" (5.0 cm - 7.6 cm) R40/RW400 2.5" - 4.5" (6.3 cm - 11.4 cm) RK40/RK400 1.5" - 2.5" (3.8 cm - 6.3 cm) *Dependent upon installation conditions. Dimensions 2.127 x 3.375 x .040" Max (5.40 x 8.57 x .10 cm) Card Construction PVC laminate Memory Type EEPROM, read/write Multi-Application Memory 2K bit (256 bytes) card Other dual technology iCLASS + Proximity HID Card Types Base Part Number: 2120 for 2k bit (256 Byte) card with 2 application areas 2123  for 16k bit (2k Byte) card with 2 application areas 2124 for 32k bit (4k Byte) 16k/2+16k/1  ..

100 Per Pack Card Memory: 8K Card Type: 13.56 MHz, ISO 14443A Manufacturer Code: MF3D8201DUD/01 Size: CR80 / credit-card-sized The NXP Mifare Desfire EV2 8K card has been designed with new smart card technology to enhance the user experience. This secure smart card complies with the standard ISO requirements for quick and highly secure data transmissions and can support a diverse range of applications such as access control, cashless vending, transport ticketing, network log-in system, biometric verification, loyalty schemes, etc. Using a capable ID card printer you can apply full-colour graphics including photos and custom line art such as barcodes, QR codes, and custom text. With a suitable direct-to-card printer you can also apply other features such as a magnetic stripe and anti-counterfeiting security features to further enhance your card's security or prevent unauthorised individuals from creating fraudulent card copies.  Features: Contactless interface compliant with ISO/IEC 14443-2/3 A Low Hmin enabling operating distance up to 100 mm Fast data transfer: 424 kbit/s 7 bytes unique identifier (option for Random ID) Uses ISO/IEC 14443-4 transmission protocol Configurable FSCI to support up to 128 bytes (256 bytes for 16 and 32 kB) frame size..