HID

FARGO 084500 Clear HDP Retransfer Film The FARGO 084500 Clear HDP Retransfer Film provides a protective clear overlay for your card designs, helping to improve durability and extend card lifespan. Delivering up to 1,500 prints per roll, it offers a cost-effective solution for businesses of all sizes while ensuring reliable card protection. With exceptional print quality and long-lasting performance, this retransfer film is a dependable investment for high-quality card production. Features & Benefits: • Up to 1,500 prints per roll • Enhances card durability with a protective retransfer film layer • Compatible with HDP5600, HDP5000, and HDP5000e printers Please note: This ribbon is compatible with the HDP5000 printer if manufactured in 2018 or later. Earlier models will require a firmware update...

125kHz Blank White Compatible Proximity Cards A Cost-Effective Alternative to the Expensive Manufacturer Cards Part Number:  21-5000-H10301 (26 bit) / 21-5000-H10304 (37 bit) Pack size:  100 cards Lead time: 4-5 working days Type: Proximity Cards, Printable PVC Cards Frequency: 125kHz Technology: 125kHz Proximity Card Size: Standard credit card size (CR80 54mm x 85.7mm) and thickness (760 micron / 30mil) Please note that these cards have a 4-5 working day lead time.  As these cards are programmed to your specifications, we regret we cannot accept returns, so please ensure you provide the correct information for programming...

Dimensions: CR80 card 54mm x 85.7mm.   Thickness:  760 micron / 30 mil Pack Size: 100 Cards Type: Mag Strip, Proximity Cards, Printable PVC Cards Technology: Mag Stripe Frequency: Other Slot Punch: None Warranty: Lifetime warranty The RF programmable HID ISOProx II proximity access card offers proximity technology and photo ID on a single access control card. Manufacture code: HID 1386 ISOProx II Card HID Duoprox II Proximity and Magstripe Card - Programmed PVC gloss finish front Magstripe and white on rear Sequential Int/Ext numbering ISO printable card with a blank magstripe on reverse Graphics quality surface for use with direct image printers Same size and thickness as a standard credit card This is a custom product as a result we cannot accept returns unless the product is faulty and the turnaround time for this custom product is approximately 5-7 working days. We can provide an exact lead time on receipt of enquiry...

Typical Maximum* Read Range ProxPoint® Plus reader-up to 1.5" (3.7 cm) MiniProx™ reader-up to 2" (5 cm) ThinLine II® reader-up to 2" (5 cm) ProxPro® reader-up to 3" (7.5 cm) ProxPro®III reader-up to 4" (10.2 cm) Prox80™ up to 2" (5.1 cm) MaxiProx® reader-up to 12" (28 cm) *Dependent on local installation conditions. Dimensions 1.555 x 1.25 x 0.235 inches max (3.95 x 3.18 x 0.60 cm) Pack size: 100 Keyfob Construction Ultrasonically welded ABS Shell with TPE insert..

The HID 2000 iCLASS Smart Card is a durable and secure contactless smart credential designed for use with HID iCLASS access control systems. Operating at 13.56 MHz, the card provides encrypted communication and mutual authentication with compatible readers, delivering reliable security for physical access control and identification applications.Encoded in the Honeywell N10002 34‑bit format, this card is fully compatible with access control systems requiring this encoding structure. With 2K bits of memory, the card supports multiple secure applications including door access control, staff identification, time and attendance systems, and other secure credentialing requirements.Key FeaturesGenuine HID iCLASS contactless smart card technology 2K bit memory for multiple secure applications 13.56 MHz RFID contactless communication Honeywell N10002 34‑bit encoding format Secure encrypted communication and mutual authentication Durable PVC construction suitable for ID badge printing Standard CR80 card size for use in ID card printers Supplied in pack of 100 cards..

HID-2050PKNMN iCLASS Key II Smart Keyfob 2K* Pack Size: 50 Cards Minimum Order Quantity: 100 Cards Type: Keyfob Technology: iCLASS Frequency: 13.56MHz Format: iCLASS Slot Punch: Key Ring Hole Manufacturer: HID Card Size: 39.5 x 31.8 x 06.0 mm Lead Time: 5-7 Working Days Applications: Access Control Warranty: Lifetime About iCLASS Key II Smart Keyfob 2K The iCLASS Key provides the security and convenience of iCLASS contactless smart card technology in a moulded plastic key fob that is durable in harsh environments. The smart key is small and convenient and can be carried with your keys in your pocket, handbag or on lanyards. HID has now discontinued this product. The ProxKey III is a replacement for the ProxKey II. This is a custom product, and turnaround is estimated at 5-7 working days however, we can confirm an exact lead time on receipt of the enquiry. As this is a custom product, we cannot accept returns unless they are faulty.   This product is made of PVC plastic which is not commonly recycled in the UK. It, therefore, cannot be disposed of in your regular recycling refuse collection. We recommend taking it to your local recycling centre for a securer and more eco-friendly disposal.    How to Order iCLASS Key II Smart Keyfob 2K To ensure that these cards are encoded correctly, please provide us with the reference number printed on an existing card or box. This is usually 7-9 numbers long and is printed on the bottom right-hand side of the card if held horizontally. If you are unsure of your card type or what you require, please contact us, and we would be happy to help. Please note that we cannot accept responsibility for incorrect information, so if you’re unsure, we do offer a free card testing service.   * Please note that this price is for a standard HID open 26 or 37-bit format. Should you require a Honeywell or other format then please contact us for a price. .recyclingbox{border-color:#032366;border:solid;border-width:5px;border-color:#032366;border-radius:200px;padding-right:5%;margin:auto;overflow:auto;max-width:740px}.recyclingsymbol{float:left;height:auto;width:150px;padding-right:5px}.recyclinginfo{padding-top:12px;font-family:Arial;font-size:14px}@media only screen and (max-width: 1199px){.recyclinginfo{padding-top:2%;font-size:12px}}@media only screen and (max-width: 991px){.recyclinginfo{padding-top:2%;font-size:1.5vw;padding-left:5%}.recyclingbox{border-radius:25px 50px}.recyclingsymbol{width:100px;height:auto}}@media only screen and (max-width: 500px){.recyclinginfo{padding:0px 4px 4px 25px;font-size:14px}.recyclingsymbol{height:auto;width:100px;float:none;margin:auto;display:block;padding-right:0px}.recyclingbox{height:auto;width:75%;border-radius:30px}}..

HID iCLASS Card 32K2 26bit Printable* Manufacturers Code: 2004PGGMN Pack Size: 100 Minimum Order Quantity: 100 Type: Printable PVC Cards Slot Punch: No Frequency: 13.56 MHz Memory Type: 32K Technology: HID iCLASS Manufacturer: HID Lead Time: 7-10 Working Days Applications: Access Control Warranty: Lifetime About HID iCLASS Card 32k  HID iCLASS smart card technology cards are is designed to make access control more versatile, more secure and more powerful. This is a custom product and turnaround is estimated at 7-10 working days however we can confirm the exact lead time on receipt of the enquiry. As this is a custom product we cannot accept returns unless they are faulty. Format, Facility Code and Number Range to be specified. If you are unsure then please place your order and contact us, we may require a sample for investigation but easiest is to get the details from the label on the box. How to Order HID iCLASS cards If you are unsure of your card type or what you require please call us on 01604 422422 and we would be happy to help. If you have any questions or would like a price for a large quantity, please call or email us at sales@idcardcentre.co.uk Please note that we cannot accept responsibility for incorrect information so if you’re unsure we do offer a free card testing service...

The HID Signo reader is a perfect choice for organisations searching for a straightforward and more secure access control technology that can replace their current system. The versatile reader uses technology with outstanding performance that supports an array of credentials, including HID's Mobile Access and provides secure storage of cryptographic on certified secure hardware.  Manage your door access system remotely to respond to updated configurations and threats as soon as possible.    Specifications MPN: 20NKS-00-000000 Transmit frequency: 125 kHz, 13.56 MHz, and 2.4 GHz] 2.4 GHz Credential Compatibility: 2.4 GHz (Bluetooth) Credential Compatibility 125 kHz Credential Compatibility: HID Proximity®, Indala Proximity®, AWID Proximity, and EM Proximity Colour: Black bezel with silver trim baseplate Warranty: Limited Lifetime  Key features Pigtail connection HID Reader Manager Mobile Credentials powered by Seos® (HID Mobile Access) EAL 6+ Certified Secure Element Hardware Suited for mullion-mount door installations or any flat surface mounting..

The HID Signo readers give organisations a smooth and straightforward approach to securing access control systems for various workplaces. Designed with an advanced hardware platform, these readers are compatible with future technologies and are compatible with more than 15 common credentials.  As well as its modern HID Mobile Acess feature the HID's technology enables you to remotely control your reader without the need of making physical contact with the device allowing you to respond to any unexpected threats, new updates and configurations.   Specifications MPN:20TKS-00-000000 Transmit frequency: 125 kHz, 13.56 MHz, and 2.4 GHz] 2.4 GHz Credential Compatibility: 2.4 GHz (Bluetooth) Credential Compatibility 125 kHz Credential Compatibility: HID Proximity®, Indala Proximity®, AWID Proximity, and EM Proximity Colour: Black bezel with silver trim baseplate Warranty: Limited Lifetime  Key features Terminal connection HID Reader Manager Mobile Credentials powered by Seos® (HID Mobile Access) EAL 6+ Certified Secure Element Hardware Suited for mullion-mount door installations or any flat surface mounting..

This product is an alternative to the HID Omnikey 3121 reader. Whilst stock of the 3121 model is low, we recommend this item as a suitable alternative. The OMNIKEY 3021 USB is a high-performance smart card reader that comes in a small form factor and is targeted for desktop and mobile usage. The OMNIKEY 3021 is an easy to install USB device suited for all contact smart card operations like online-banking or digital signature applications. Elegant design Small form factor fit for letter shop All major operating systems supported High speed data transmission    ..

The HID OMNIKEY® 5422 represents the ultimate combination of contact and contactless technology in a single device. The solution features a dual interface, PC-linked reader that reads / writes to both a 13.56 MHz contactless smart card and virtually any contact smart card to support environments where both contact and contactless smart card technologies are required. The reader provides users with the convenience, speed and security for applications such as user authentication to PCs, software, cloud-based applications, networks and web sites. The OK5422 eliminates the requirement for driver installation and is suitable to be used with standard PC or workstations, as well as with thin and zero clients.   Benefits:   Versatile – Ideal for end-user environments using both contact and contactless smart card technology and migration scenarios Leverages existing employee badge – Expands the usage of existing physical access cards to computer logon, as well as network and cloud applications. Easy to install – Eliminates the need to install drivers; uses native supported CCID drivers within the operating system. Increased security and improved user experience – Read and retrieve highly secure one-time passwords (OTP) from Seos® card...

SLE 5542 Contact Smart Card Plain White Infineon SLE 5542 Contact Chip Cards. Intelligent 256 byte EEPROM with write protection function and programmable security code. The SLE5542 is a fully compatible, upgraded version of the SLE4442. Plain white and smooth credit card size so can be personalised with data through any plastic card printer...

Indala FlexCard Clamshell Cards Manufacturer: HID Brand: Indala​ Manufacturer Part Number: FPCRD-SSSMW-0000 Product Code: 21-1050 Minimum Order Quantity: 100 Cards Product Type: Clamshell Card Technology: 125kHz Proximity Frequency: 125kHz Slot Punch: Slot/Hole Punched Lead Time: 7-10 Working Days About Indala FlexCard Clamshell Cards HID's Indala FlexCard is a standard "credit card" sized clamshell card with bevelled edges, and the FlexCard can accept photo-flap and direct-print adhesive-backed ID badge overlays. Durable ABS card constructions make the FlexCard a great choice for warehouse, factory and university applications. Key Features: FlexCard is compatible with all Indala readers Easily encoded with Indala ProxSmith Programmer and toolkit No battery design gives an infinite number of reads. Warranted for life, against defects in materials and workmanship. ABS construction. Flexible and Light. Vertical design, well suited for bade use.   This product is made of PVC plastic which is not commonly recycled in the UK. It, therefore, cannot be disposed of in your regular recycling refuse collection. We recommend taking it to your local recycling centre for a securer and more eco-friendly disposal.  .recyclingbox{border-color:#032366;border:solid;border-width:5px;border-color:#032366;border-radius:200px;padding-right:5%;margin:auto;overflow:auto;max-width:740px}.recyclingsymbol{float:left;height:auto;width:150px;padding-right:5px}.recyclinginfo{padding-top:12px;font-family:Arial;font-size:14px}@media only screen and (max-width: 1199px){.recyclinginfo{padding-top:2%;font-size:12px}}@media only screen and (max-width: 991px){.recyclinginfo{padding-top:2%;font-size:1.5vw;padding-left:5%}.recyclingbox{border-radius:25px 50px}.recyclingsymbol{width:100px;height:auto}}@media only screen and (max-width: 500px){.recyclinginfo{padding:0px 4px 4px 25px;font-size:14px}.recyclingsymbol{height:auto;width:100px;float:none;margin:auto;display:block;padding-right:0px}.recyclingbox{height:auto;width:75%;border-radius:30px}}   Ordering Indala FlexCard Clamshell Cards To ensure that these cards are encoded correctly, please provide us with the format, facility/site code and the sequential numbering required. If you’re unsure of the above information, please provide us with your Sales Order Number so we can obtain these details on your behalf.   Please note that we cannot accept responsibility for incorrect information, so if you're unsure, we do offer a free card testing service.   If you need any assistance or would like a price for bulk orders, please contact us for more information.  This is a custom product, and turnaround is estimated at 7-10 working days however, we can confirm the exact lead time on receipt of the enquiry. As this is a custom product, we cannot a..

**There is an extended lead time of 4-5 weeks on this product. If you require this reader sooner then we recommend Omnikey 3021 which offers the same functionality.**   The OMNIKEY 3121 USB Card Reader is a high performance USB smart card reader aimed at desktop use. It has multiple standing options and is contained within a robust housing. The OMNIKEY 3121 is an easy-to-install USB card reader suited for all contact smart card operations like online-banking or digital signature applications.   Key Features   Different standing base options available for convenient vertical and horizontal use Shipped with support for adhesion (e.g. to PC monitor) Robust housing and long USB cable High speed data transmission All major operating systems supported  ..

The Omnikey 3121 Reader Board USB is a high performance smart card reader board for OEMS. This reader board is compatible with virtually any contact smart card which is designed to facilitate easy device installation for all your major PC operating systems, known as plug and play. The Reader Board meets all the relevant industry standards which allows you a smooth integration in a PC environment. Simply integrate into an existing system by connecting a host and smart card reader without the need of additional drivers...

ProxPoint Plus Grey reader Wiegand Output & Pigtail* Manufacturer Part Number: 6005BGB00 For installer or trade pricing, please contact us. HID's ProxPoint Plus reader combines multiple configuration options with an attractive, inconspicuous design and economical price. Its secure potted electronics are ideal for both indoor and outdoor applications. Small-sized, low-cost reader features a beeper and multicolour LED, which can be hosted and/or locally controlled. Potted reader is suitable for indoor or outdoor use. 18" (45 cm) wire pigtail standard *Please note that this price is for a standard HID open format; should you require a Honeywell or other format, please contact us for a price...

HID Global's OMNIKEY 5427CK Reader combines a modern design with a small footprint and functions in virtually any PC environment, opening new market opportunities for system integrators. Independent of operating system, the reader includes CCID and Keyboard Wedge Interface and it is commonly used for secure print authentication applications and access control systems as well as PC login using existing employees' credentials. The reader also supports low and high frequency technologies within a single device to provide organisations with a seamless migration path and enabling mixed credential technology environments. Additionally, the reader includes an integrated, easy-to-use web based management tool that enables intuitive, browser-based configuration independent from the operating system.   Key Features   Security - Enhanced system security supporting low and high frequency credentials including HID Prox, Indala Prox, MIFARE® Classic, MIFARE DESFire EV1, iCLASS, and iCLASS SE. Ease of use - Straightforward utilisation of existing access control credentials for PC login in both CCID and Key Wedge operation modes. CCID Support - Eliminates the need to install drivers on standard operating systems. Keyboard Wedge support - Retrieves data from a card and presents the information directly to any application by emulating keyboard strokes. Flexibility - Numerous accessories and mounting options are available...

Built with an advanced multi-layer security to heighten data authenticity and privacy the Signo Reader technology provides environments needing a secure access control system with a contactless door entry feature and mobile phone access available. The reader can be used with numerous common credential technologies and is compatible with mobile devices once connected to Bluetooth and NFC. The reader's highly secure authentication which uses the SIO data model and modern design is perfect for any workplace.  Specifications MPN: 20KNKS-00-000000 Transmit frequency: 125 kHz, 13.56 MHz, and 2.4 GHz] 2.4 GHz Credential Compatibility: 2.4 GHz (Bluetooth) Credential Compatibility 125 kHz Credential Compatibility: HID Proximity®, Indala Proximity®, AWID Proximity, and EM Proximity Colour: Black bezel with silver trim baseplate Warranty: Limited Lifetime  Key features Pigtail connection HID Reader Manager Mobile Credentials powered by Seos® (HID Mobile Access) EAL 6+ Certified Secure Element Hardware Suited for mullion-mount door installations or any flat surface mounting..

HID Signo 40 Keypad Reader - Terminal Connection Manufacturer Part Number: 40KTKS-00-000000 The Signo reader is one of HID’s signature line of access control readers which provides high levels of security. With its HID Secure Identity Object (SIO) data model you can ensure your identity information is securely stored and transported in a single object. The reader’s support for HID’s iCLASS Elite and Corporate 1000 programs, is just one of the Signo’s excellent features like the ability to secure storage of cryptographic keys on secure element hardware. This Signo has all the qualities and specifications for environments needing an access control system to securely allow permitted individuals to access the premises of an organisation. HID is now taking technology a step further by enabling you to operate the reader via mobile with Bluetooth and NFC support.  Go mobile with Bluetooth and NFC support  Integrated 125 kHz credential read support for easy migration Highly secure authentication  Supports over 15 standard credential technologies  Compatible with iCLASS Elite™ and Corporate 1000 Programs Secure data authenticity and privacy  Specifications 2.4 GHz Credential Compatibility: 2.4 GHz (Bluetooth) Credential Compatibility 125 kHz Credential Compatibility: HID Proximity®, Indala Proximity®, AWID Proximity, and EM Proximity Mounting: Suited for mullion-mount door installations or any flat surface mounting Colour: Black bezel with silver trim baseplate Transmit frequency: 125 kHz, 13.56 MHz, and 2.4 GHz Warranty: Limited lifetime..

The HID 2002 iCLASS Smart Card is a high-security contactless smart credential designed for use with HID iCLASS access control systems. Operating at 13.56 MHz, the card provides secure read/write communication with compatible HID readers, delivering reliable performance for physical access control and identification applications.Featuring 16K bits of memory with 16 application areas, the card supports multiple secure applications including door access control, network log-on, cashless payment, and time and attendance systems. iCLASS technology uses encrypted data transfer and mutual authentication between the card and reader, helping to protect against unauthorised duplication and credential compromise. Key Features Genuine HID iCLASS contactless smart card technology 16K bit memory with 16 application areas 13.56 MHz RFID contactless communication Honeywell N10002 34-bit card format Secure encrypted communication between card and reader Mutual authentication for enhanced security Supports multiple secure applications Printable surface suitable for ID badge printing Supplied in pack of 100 cards..

HID Amico VL35LF Biometric Facial Recognition ReaderThe HID® AMICO™ VL35LF Biometric Facial Recognition Reader is a modern, contactless access control solution designed for secure and seamless entry. Offering easy integration with existing systems, it prioritises user convenience while maintaining maximum privacy and security.This 3.5” facial recognition reader is ideal for use in campuses, airports, offices, and other high-traffic areas, where speed and accuracy are essential. Built using Paravision’s secure AI technology, the reader delivers fast, reliable facial verification that minimises wait times and reduces misidentification, even in busy environments.In addition to facial recognition, the HID® AMICO™ supports multiple authentication methods, including RFID cards, QR codes, PINs, and mobile credentials, giving organisations flexibility and scalability.Key FeaturesReal-time, highly accurate facial verification - Powered by Paravision’s advanced AI, the reader provides accurate facial recognition with integrated liveness detection and anti-spoofing protection, ensuring secure access in high-traffic areas.Effortless connectivity - Seamlessly integrates with existing access control systems using standard protocols such as OSDP and Wiegand, with Power over Ethernet (PoE) support for simple installation.Multi-factor authentication - Supports a range of secure, contactless authentication options including facial recognition, RFID, QR codes, PINs, and HID Mobile Access®, improving accessibility and user experience.High performance at scale - Designed for organisations with large user bases, delivering fast entry speeds and reliable performance across busy sites and modern security environments.With technologies like 13.56MHz, 125 kHz and 2.4GHz, this VL35LF also supports: SEOS iCLASS iCLASS SE MIFARE DESFire EV1/2/3 HID Prox Bluetooth LE..

The HID FlexSmart MIFARE Classic EV1 1K card is a reliable contactless smart card credential designed for secure identification and access control applications. Operating at 13.56 MHz, the card uses MIFARE Classic EV1 technology to provide dependable communication with compatible RFID readers. Encoded in the Honeywell N10002 format, these cards are suitable for use with Honeywell access control systems that require this specific card format. With 1K of memory available, the credential supports a range of applications including building access control, staff identification, time and attendance systems, and integrated security solutions.Key FeaturesGenuine HID FlexSmart contactless smart card MIFARE Classic EV1 1K chip technology 13.56 MHz contactless RFID frequency Honeywell N10002 card format Standard CR80 card size (credit card dimensions) Durable PVC construction suitable for ID printing Compatible with MIFARE Classic access control systems Supplied in a pack of 100 cards..

HID iCLASS PVC Printable 2k/2 Smart Card 34-bit Controlsoft Proprietary Format Manufacturer Part Number: 2000PGGMN* Pack Size: 100 Cards Minimum Order Quantity: 100 Cards Type: Printable PVC Cards, Contactless Technology: iCLASS Frequency: 13.56MHz Memory Type: 2K bits (256 bytes) Data Retention: 10 years Write Endurance: Min.100,000 cycles Slot Punch: None Manufacturer: HID Card Size: 85.7 mm x 54 mm Lead Time: 5-7 Working Days Applications: ID Cards/ Access Control/Loyalty Cards/ Biometrics and Transportation Warranty: Lifetime About HID iCLASS PVC Printable 2k/2 Smart Card 34-bit Controlsoft Proprietary Format. Thin ISO Printable card, plain on both sides - printable with graphics and/or text with direct image printers. Same size and thickness as a standard credit card. - Vertical or horizontal slot punch capability. This is a custom product, and turnaround is estimated at 5-7 working days however we can confirm an exact lead time on receipt of the enquiry. As this is a custom product, we cannot accept returns unless they are faulty...

Indala Prox Key Fobs Manufacturer: HID Brand: Indala Manufacturer Part Number: FPKEY-SSSS-0000 Product Code:  FPKEY-SSSS-0000 Product Type: Key Fob Pack Size: 100 Technology: 125kHz Proximity Lead Time: 7-10 Working Days About Indala Prox Key Fobs HID's Indala key fob has a design which allows the key fob to be attached safely and quickly to a key, clip or lanyard. Ideally, this is suited for various applications and environments such as holiday resorts, locker rooms, health spas, apartment buildings and commercial offices where no photo IDs are needed, and security is of the utmost importance.  Key Features: Flexibility and convenience Double-sealed construction Customisable  No battery design allows for an infinite number of reads   This product is made of a type of plastic which is not commonly recycled in the UK. It, therefore, cannot be disposed of in your regular recycling refuse collection. We recommend taking it to your local recycling centre for a securer and more eco-friendly disposal. .recyclingbox{border-color:#032366;border:solid;border-width:5px;border-color:#032366;border-radius:200px;padding-right:5%;margin:auto;overflow:auto;max-width:740px}.recyclingsymbol{float:left;height:auto;width:150px;padding-right:5px}.recyclinginfo{padding-top:12px;font-family:Arial;font-size:14px}@media only screen and (max-width: 1199px){.recyclinginfo{padding-top:2%;font-size:12px}}@media only screen and (max-width: 991px){.recyclinginfo{padding-top:2%;font-size:1.5vw;padding-left:5%}.recyclingbox{border-radius:25px 50px}.recyclingsymbol{width:100px;height:auto}}@media only screen and (max-width: 500px){.recyclinginfo{padding:0px 4px 4px 25px;font-size:14px}.recyclingsymbol{height:auto;width:100px;float:none;margin:auto;display:block;padding-right:0px}.recyclingbox{height:auto;width:75%;border-radius:30px}}   Ordering Indala Prox Key Fobs To ensure that these fobs are encoded correctly, please provide us with the format, facility/site code and the sequential numbering required. If you’re unsure of the above information, please provide us with your Sales Order Number so we can obtain these details on your behalf. Please note that we cannot accept responsibility for incorrect information, so if you're unsure, we do offer a free card testing service. If you need assistance or would like a price for bulk orders, please contact us for more information and up-to-date pricing.  This is a custom product, and turnaround is estimated at 7-10 working days however, we can confirm the exact lead time on receipt of the enquiry. As this is a custom product, we cannot accept returns unless they are faulty. Disclaimer: Third-party brand or company names are only used where necessary for correct compatibility with the appropriate third-party equipment...

Dimensions: CR80 card 54mm x 85.7mm.   Thickness:  760 micron / 30 mil Pack Size: 100 Cards Type: Mag Strip, Proximity Cards, Printable PVC Cards Technology: Mag Stripe Frequency: Other Warranty: Lifetime The RF-programmable HiD DuoProx II access control card combines proximity, magnetic stripe and photo identification technologies all on a single card. Credit card sized and is ISO 7810 compliant. Manufacturer Code: HID 1336 DuoProx II Card HID Duoprox II Proximity and Magstripe Card - Programmed PVC gloss finish front Magstripe and white on rear Sequential Int/Ext numbering ISO printable card with a blank magstripe on reverse Graphics quality surface for use with direct image printers Same size and thickness as a standard credit card This is a custom product as a result we cannot accept returns unless the product is faulty and the turnaround time for this custom product is approximately 5-7 working days. We can provide an exact lead time on receipt of enquiry...

Typical maximum* read range ProxPoint™ reader up to 1.0" (2.5cm) MiniProx™ reader-up to 2" (5cm) ThinLine II® reader-up to 1.5" (3.7cm) ProxPro® reader-up to 3" (7.5cm) MaxiProx® reader-up to 4.5" (11.4cm) *Depending on local installation conditions. Diameter: 1.285" (3.264 cm) Thickness: 0.070" (0.178 cm) Outer Shell Material: Lexan Options: Color - black or gray..

The OMNIKEY 6121 Mobile USB is a fully functional smart card reader for SIM-sized smart cards and is especially well-suited for use with mobile devices. Applications for this reader include the download of GSM applications from the internet to the SIM card, W-LAN authentication, secure PC log-on, PKI for mobile users, digital signature, secure mobile banking and online transactions, loyalty programs, healthcare solutions and many more applications in the future.   Key Features   Elegant Design High speed data transmission All major operating systems supported Full CCID compliant Hotplug Driver available Keychain loop  ..

The Omnikey® 5127CK mini CCID & keyboard wedge reader board enables integrators to design finished readers without the need to install or maintain drivers. this eliminates complex software lifecycle management issues and accelerates the time to market of finished devices. These finished devices are commonly used in printers, copiers, vending machines and access control systems. Its compact design and small footprint provides capability for installation in space constrained designs. Its triple frequency capability (13.46MHz, 125KHz and Bluetooth Smart) allows simultaneous support for low and high frequency credentials, including iCLASS Seos®, HID Prox®, iCLASS SE®, MIFARE Classic® and MIFARE® DESFire® EV1 and also supports NFC and Bluetooth for mobile devices. It also benefits from mulit-interface support including CCID, keyboard wedge and UART interfaces meaning flexible integration options for a wide range of applications...

HID FARGO 45610 YMCKO Color Ribbon Prints per Ribbon: 500 Manufacturer Part Number: 42-2220Compatible with: HID FARGO DTC1500Ensure you select the correct ribbon for your printer. Using an incompatible ribbon may impact print quality or cause printer issues. If you are unsure which ribbon you need for your print job, please contact us for assistance.Ribbon Details: The HID FARGO 45610 YMCKO ribbon uses a five-panel format: Yellow, Magenta, Cyan, Black, and Overlay. Color Panels: Produce high-quality, full-color card images. Black Panel: Prints sharp text and barcodes. Overlay Panel: Adds a clear protective coating to the card, helping prevent wear and fading and extending card life...

HID MiniProx Grey Reader Wiegand Output and Pigtail* Manufacturers Part Numbers: 5365EGP00 For installer or trade pricing, please get in touch with us. The MiniProx proximity card reader's potted electronics and slim, attractive design are ideal for indoor or outdoor mounting. Available with either pigtail or terminal strip (terminal strip only for Hazardous Location version). Available with Wiegand or Clock-and-Data interface. Potted reader is suitable for indoor or outdoor use. Hazardous Location version is UL 1604, Class I & II, Div. 2 and Class III listed *Please note that this price is for a standard HID open format; should you require a Honeywell or other format, please get in touch with us for a price...

HID’s Signo reader is a reader built with out-of-the-box support for OSDP Secure Channel Protocol (OSDP) for encrypted bidirectional communication complemented by a  modern design perfect for complementing your workplace’s interior.  HID's access control readers are an ideal access control solution to keeping your business or organisation safe and secure. You can now access buildings by using your very own mobile to access the premises when you forget your identity card or badge at home.  Specifications MPN: 40NKS-00-000000 Transmit frequency: 125 kHz, 13.56 MHz, and 2.4 GHz] 2.4 GHz Credential Compatibility: 2.4 GHz (Bluetooth) Credential Compatibility 125 kHz Credential Compatibility: HID Proximity®, Indala Proximity®, AWID Proximity, and EM Proximity Colour: Black bezel with silver trim baseplate Warranty: Limited Lifetime  Key features Terminal connection HID Reader Manager Mobile Credentials powered by Seos® (HID Mobile Access) EAL 6+ Certified Secure Element Hardware Suited for mullion-mount door installations or any flat surface mounting..

125kHz Blank White Compatible Proximity Cards These blank white compatible 125khz proximity cards can be encoded with site code and sequential numbering in order for them to be compatible with your existing access control systems in place. the cards are programmed, utilising 26-bit H10301 or 37-bit H10304 formatting. If you are concerned before placing your order, please contact us today for samples for compatibility testing on your system. Please note that there is a minimum order quantity of 50 cards. Should you not be aware of your programming details, we do offer a testing facility where we can determine your card type for you, please get in touch to discuss. Please note that these cards have a 4-5 working day lead time.  As these cards are programmed to your specifications, we regret we cannot accept returns, so please ensure you provide the correct information for programming. Disclaimer: Third-party brand or company names are only used where necessary for correct compatibility with the appropriate third-party equipment...

*Read Range using MaxiProx® reader 0-6 feet (0 - 1.82 m) *Depending on local installation conditions. Dimensions 3.625" x 2.65" x 0.30" (9.25cm x 6.75cm x .76cm) Card Construction Rugged, UV-resistant, sonic-welded polycarbonate case is also weather resistant..