Search

Paxton Net2 Proximity Keyfob - 10 Pack Manufacturer: Paxton Manufacturer Part Numbers: 695-644 Pack Size: 10 Product Type: Keytags/Keyfobs, Contactless, Coloured Colour: Blue Technology: Net2, 125kHz Proximity Frequency: 125 kHz About Paxton Net2 Proximity Keyfob The Net2 keyfob can be conveniently carried on the user’s keyring or can be attached to any of our lanyards, chains or badge reels for convenient, lightweight and durable door access. The keyfob can be used instead of a card in applications where a photo ID is not required Also now compatible with the Paxton10 readers. This product is made of a type of plastic which is not commonly recycled in the UK. It, therefore, cannot be disposed of in your normal recycling refuse collection. We recommend taking it to your local recycling centre for a securer and more eco-friendly disposal.  .recyclingbox{border-color:#032366;border:solid;border-width:5px;border-color:#032366;border-radius:200px;padding-right:5%;margin:auto;overflow:auto;max-width:740px}.recyclingsymbol{float:left;height:auto;width:150px;padding-right:5px}.recyclinginfo{padding-top:12px;font-family:Arial;font-size:14px}@media only screen and (max-width: 1199px){.recyclinginfo{padding-top:2%;font-size:12px}}@media only screen and (max-width: 991px){.recyclinginfo{padding-top:2%;font-size:1.5vw;padding-left:5%}.recyclingbox{border-radius:25px 50px}.recyclingsymbol{width:100px;height:auto}}@media only screen and (max-width: 500px){.recyclinginfo{padding:0px 4px 4px 25px;font-size:14px}.recyclingsymbol{height:auto;width:100px;float:none;margin:auto;display:block;padding-right:0px}.recyclingbox{height:auto;width:75%;border-radius:30px}}..

Pack of 100 15mm Pre-Printed NHS Blue Lanyard with Triple Health & Safety Breakaway and Metal Trigger Clip Plastic-ID Part Number: 06-1125X3 Lanyard Pack Size: Pack of 100 This is an NHS blue (Pantone 300) polyester lanyard. It's 15mm wide, pre-printed with the NHS logo in white and fitted with a metal trigger clip. Where it differs from our standard NHS lanyard is the number of breakaway points. This lanyard has triple breakaway points, rather than the usual one or two.Each breakaway is an independent point along the strap where it can separate if it's grabbed or caught. Spacing three of them along the lanyard means there's more than one place for it to give way, rather than relying on a single point taking all the strain. That matters most in higher-risk settings, mental health wards, paediatrics, dementia care, where a lanyard is more likely to be pulled or grabbed directly than simply snagged on a door handle in passing.The metal trigger clip also makes day-to-day use straightforward for NHS staff moving through entry and exit points repeatedly. It holds an ID card or access control fob securely, so tapping in and out doesn't mean unclipping and reclipping each time. About our pre-printed NHS lanyards High-quality, professional finish Comfortable to wear and durable Three health & safety breakaway clips fitted as standard - breaks apart if pulled or caught and easily clips back together Same day dispatch on orders placed before 3pm Due to the nature of this product, the following terms will apply: Payment must come directly from an NHS organisation Delivery must be to the address of an NHS organisation Please also note that due to NHS branding guidelines, we’re unable to show the full NHS Logo on our website, but all NHS lanyards will feature the full NHS logo...

About These Lanyards "VISITOR" is printed clearly in white on a bright blue background, so your team can identify a guest without checking a badge up close. It's made from RPET, genuine recycled plastic bottles, and comes with a plastic J clip and a health and safety breakaway fitted as standard, so it releases safely if it's ever caught or pulled while your visitors are on site. Pack size: 100 Model Number: 328-3223 Colour: Blue Size (Width): 15mm Size (Length): 45cm Material: RPET, made from recycled plastic bottles Why Blue Suits a Visitor, Not Just Your Building Most people wearing a visitor lanyard aren't entirely comfortable; they're stepping into somewhere unfamiliar, whether that's a job interview, a hospital appointment, or a first meeting with a new client. A loud or attention-grabbing colour can make that feeling worse; it draws eyes in a way that can feel exposing. Blue doesn't do that. It's understated enough that the person wearing it isn't made to feel singled out, while still doing its actual job of telling everyone else who they are. That matters more in settings where visitors are already a little on edge, like hospitals, schools, interviews or official appointments. A calm colour on the one thing they're wearing throughout the visit is a small detail, but it's the kind of small detail that makes a building feel considerate rather than just procedural...

Pack size: 100 Model Number: 328-3229 Colour: Blue Size (Width): 15mm Size (Length): 45cm Material: RPET Made from recycled plastic bottles About These Lanyards Our contractor lanyards provide you with a quick and easy way to separate contractors from staff on your site. "CONTRACTOR" is printed clearly in white text on blue, so your team can identify contractors on site without checking an ID card up close. It's made from RPET (recycled plastic bottles), with a plastic J clip and a health and safety breakaway fitted as standard, releasing safely if it's ever caught or pulled. Why Contractors Need Different Lanyards IT support, maintenance engineers, and cleaning contractors regularly work in offices and corporate buildings, and they need to be identifiable for a few reasons. Firstly, it keeps things professional; secondly, it helps staff see who's who and who they need to speak to about IT and maintenance issues. Finally, it helps anyone who is unfamiliar with the contractors visiting spot them from a distance; this isn't only handy in a corridor, but vital in an emergency. Contractors are not the same as staff or visitors; clearly marking someone as a contractor ensures everyone in the building knows who they are and what areas they are allowed to be in. Shop our high-quality contractor lanyards today so that everyone entering your organisation can display their role clearly...

Pack of 100 15mm Pre-Printed NHS Blue Lanyard with Black Plastic Clip and Single Health & Safety Breakaway Pack size: 100Model Number: 06-1125Colour: NHS blueSize (Width): 15mmSize (Length): 45cmMaterial: RPET (Recycled Polyester), made from recycled plastic bottles These 15mm wide, NHS blue (Pantone 300) polyester lanyards feature a black plastic clip for attaching ID cards and cardholders, and a single black plastic health and safety breakaway. The material is pre-printed with the NHS logo in white. About Pre-Printed NHS lanyards Cost-effective alternative to personalised lanyards High-quality, professional finish Comfortable to wear and durable Single health & safety breakaway clips fitted as standard - breaks apart if pulled or caught and easily clips back together Same day dispatch on orders placed before 3pm Due to the nature of this product, the following terms will apply: Payment must come directly from an NHS organisation Delivery must be to the address of an NHS organisation Please also note that due to NHS branding guidelines, we’re unable to show the full NHS Logo on our website, but all NHS lanyards will feature the full NHS logo.Built for Everyday NHS RolesReception staff, administrative teams, ward clerks, outpatient booking, porters, the roles that keep an NHS site running day to day all need the same thing: a lanyard that displays their ID clearly and holds up to a full shift without fuss. This one does exactly that.Genuine NHS branding, same-day dispatch, and a pack of 100 ready to issue to a whole team or department in one order...

Pack of 100 15mm Pre-printed NHS Blue Lanyard with Double Health & Safety Breakaway and Metal Trigger Clip Plastic-ID Part Number: 06-1125X2 Lanyard Pack Size: Pack of 100 High-quality, professional finish Comfortable to wear and durable Two health & safety breakaway clips fitted as standard - break apart if pulled or caught and easily clip back together Same-day dispatch on orders placed before 3 pm About 15mm Pre-Printed NHS Blue Lanyards with Double Health & Safety Breakaway and Metal Trigger Clip These NHS blue (Pantone number 300) polyester lanyards feature a metal trigger clip and two black plastic health and safety breakaways, and are 15mm wide and pre-printed with the NHS logo in white. Ideal for displaying ID cards and providing easy access for technology cards and fobs when moving through entry and exit points. Due to the nature of this product, the following terms will apply: Payment must come directly from an NHS organisation Delivery must be to the address of an NHS organisation Please also note that due to NHS branding guidelines, we’re unable to show the full NHS Logo on our website, but all NHS lanyards will feature the full NHS logo.Why Double Breakaway Lanyards Keep NHS Staff SafeTwo breakaway points mean there are two fail points built into this lanyard, so if it gets snagged or grabbed, there are two ways that it will easily fall away from the neck and keep the staff member safe in that situation. These lanyards are good for higher-risk wards like mental health, paediatrics and dementia care wards where the care of the patients and staff are intertwined. We also stock triple breakaway NHS lanyards for even more protection, as well as single breakaway lanyards for people in office and admin roles. ..

Pre-Printed NHS Blue Lanyard with Double Breakaway Clip and Badge Reel Attachment Plastic-ID Part Number: 06-1130-NHS Pack of 100 These 15mm-wide NHS blue (Pantone® 300) lanyards are made from polyester and feature a semi-transparent blue retractable badge reel with a vinyl strap, two black plastic health and safety breakaways, and are pre-printed with the NHS logo in white.The attached badge reel clip makes them a great choice for NHS staff who use access control cards or fobs throughout their shift because the fob or card remains accessible without being in the way and there's no need to remove the lanyard to operate the reader, so access can be achieved with one hand.  Due to the nature of this product, the following terms will apply: •    Payment must come directly from an NHS organisation •    Delivery must be to the address of an NHS organisation Due to NHS brand guidelines, we are unable to show the full NHS Logo on our website. All NHS lanyards will feature the full NHS logo within the design of the lanyard and, in this case, the badge reel...

FARGO blue ribbon - 2000 image. Includes cleaning roller. Manufacturer Code: 45203..

Pack size: 5 Colours Available: Blue, Green, Red, White, Yellow About the Salto WBM01KBM 1K Wristband These contactless RFID silicone bracelets are comfortable, easy to wear and a good alternative to classic key fobs and cards.  A convenient solution for commercial and industrial applications, with a durable housing for rugged use or harsh environments Meets requirements for contactless access control and is compatible with SALTO Virtual Network data-on-card technology. Available in 1 Kbytes / 4 Kbytes of memory Operates at 13.56MHz  Durable & Waterproof  ..

Prints per ribbon:  600 Manufacturer Code:  R2212 Model No: 451-1002 Colour: Blue Compatible Printers: Evolis Tattoo 2 Evolis Blue Monochrome Ribbon Cool blue coloured ribbon for your Evolis Tattoo 2 card printer. Ideal for creating a cool and calm, natural feel to your card printing Please ensure that you are purchasing the correct ribbon for your printer.  Please note that this ribbon may not be compatible with a printer purchased outside of the EU due to region restrictions – if you are unsure, please check before purchase...

Please note this ribbon is only compatible with the Evolis Primacy 2 ID Card Printer and Zenius 2. Using the blue monochrome ribbon designed by Evolis High Trust®, you can apply custom elements to your cards such as text, numbers, block prints, icons, barcodes, and more onto light-coloured cards to produce bespoke card designs. Use the blue monochrome ribbon alongside an Evolis Primacy 2 ribbon to produce personalised ID cards or plastic cards for various applications, including gift and loyalty systems, access control, event ticketing, membership, transport ticketing, cashless vending, and much more. The Evolis blue monochrome ribbon comes in special packaging to ensure you can easily install your ribbon into an Evolis Primacy 2 ID card printer in a snap! Evolis Printer Ribbon Features: Blue monochrome ribbon Produces 1000 prints Genuine Evolis High Trust® ribbon Compatible with Evolis Primacy 2 and Zenius 2 Suitable for single/double-sided printing Suitable for use with Evolis lamination printer modules Manufacturer Code: RCT212NAAA For high-volume plastic card printing, take a look at our Easy4Pro printer ribbon range. These ribbons are made with less plastic, ideal for organisations that want to reduce consumption and waste for a limited environmental impact...

Breakaway Safety Lanyard with Metal Clip – Durable, Secure & Comfortable Ensure both convenience and safety with our premium Breakaway Safety Lanyard with Metal Clip, designed for secure badge or ID card display in demanding environments. Featuring a sturdy metal lobster clip, this lanyard keeps ID holders, access cards, or keys firmly attached throughout the day. The safety breakaway mechanism is engineered to release instantly under pressure, making it ideal for workplaces prioritising employee protection, such as hospitals, schools, warehouses, and offices. Its flat RPET construction offers lasting comfort for all-day wear, and the 10mm width is ideal to not be too intrusive. Key Features: Strong metal trigger clip for secure attachment Safety breakaway for enhanced user protection Comfortable flat polyester material (15mm wide) Ideal for ID badges, access cards, and keys Available in a range of vibrant colours for easy identification or branding:BlackDark BlueDark GreenGreyLight blueLight GreenNavy BlueOrangePinkPurpleRedWhiteYellow Perfect for high-traffic settings or health & safety-focused organisations, this breakaway lanyard offers the ideal blend of functionality, compliance, and professional appearance...

The Evolis R2012 blue monochrome ribbon can print up to 1000 images and is compatible with the Pebble, Dualys, Quantum, Kiosk and Securion card printers.   Please note that these ribbons are no longer being produced by Evolis. We have limited stock available and will not be receiving any more once the existing stock runs out. With the Evolis Pebble ID card printer no longer being supported by the manufacturer, we recommend upgrading to a new model. Save up to £385 when you trade in your old Pebble printer for a new, upgraded Evolis model. Please contact us to find out more. Evolis Model Cashback Amount Zenius £70 Primacy (Simplex) £120 Primacy (Duplex) £135 Primacy 2 Lamination (Simplex) £220 Primacy 2 Lamination (Duplex) £255 Agilia (Simplex) £255 Agilia (Duplex) £300 Quantum £385 For Use With: Evolis Pebble Evolis Dualys Evolis Quantum Evolis Kiosk Securion Manufacturer Code: Evolis R2012..

Printer Ribbon for 2XL 2.0 and Nexus 2.0 - Dark Blue Monochrome Prints Per Ribbon: 2000 Product Code:  47-2060 Please note that the 2XL 2.0 printers are chipped regionally, and our ribbons are only compatible with printers produced in the UK and Germany. This ribbon will not work in a 2XL 2.0 printer produced for Italy, Spain or China.  If you are in doubt, please contact us with your printer serial number, and we'll confirm compatibility...

Prints per ribbon:  1000 Manufacturer part number:  M9005-753-2 Model No: 317-4006 Colour: Blue Magicard LC3 Single Colour Ribbon - Blue M9005-753-2 This ribbon is compatible with the following printers: Magicard Tango, Tango 2, Tango 2e, Magicard Avalon. Magicard Rio, Rio 2 and Rio 2e Please ensure that you are purchasing the correct ribbon for your printer.  Please note that this ribbon may not be compatible with a printer purchased outside of the EU due to region restrictions – if you are unsure, please check before purchase. Blue resin ribbon with no overlay Prints up to 1000 images Easy Installation Vibrant Blue Colour..

Paxton10 Bluetooth Handsfree Fob (010-690) The Paxton10 Bluetooth Handsfree Fob enhances secure access control by allowing authorised users easy, hands-free entry to restricted areas of businesses and organisations containing sensitive information. Integrated with Paxton10’s web-based software, this fob can be quickly added to your access system and paired with the Paxton10 desktop reader. Once paired, simply bring the fob close to the reader to unlock access instantly. Thanks to its built-in NFC functionality, the fob can continue functioning as an RFID fob even after the battery is depleted, ensuring uninterrupted access. Top Features: Improves Access Control Capabilities Hands-Free Key fob Long-Lasting Battery Bluetooth Range up to 10 Meters Dimensions: 28mm (W) x 11mm (H) x 49mm (D) 5-Year Warranty  ..

Prints per ribbon:  1500 Manufacturer part number:  532000-003 Model No: 323-1003 Colour: Blue Datacard Dark Blue Ribbon Kit 532000-003 This ribbon is compatible with the following printers: Datacard SP35, Datacard SP55, Datacard SP75, Datacard SD360, Datacard SD460, Datacard SD160, Datacard SD260 Dark Blue Ribbon Kit (PMS 287C) - 1500 images As one of the three primary colours, blue is an essential part of the design and printing process. Offering a cool and calming tone to your ID cards. Trust in the quality of this dark blue ribbon kit for all your datacard printing needs Please ensure that you are purchasing the correct ribbon for your printer.  Please note that this ribbon may not be compatible with a printer purchased outside of the EU due to region restrictions – if you are unsure, please check before purchase. Prints up to 1500 images  ..

FARGO Blue Ribbon - 1000 images. Includes a cleaning roller. Manufacturer Code: 45103..

Prints per ribbon:  1000 Manufacturer Code:  MA1000k-Blue Model No: 316-8340 Colour: Blue Compatible Magicard Printers: Enduro+ / Enduro3E / Pronto / Rio Pro / Rio Pro 360 / 300 / 600 / E+ Magicard Monochrome Blue Ribbon - 1000 images Give your ID cards a cool blue colour with this stunning blue ribbon. Capable of handling the larger prints of images and logos as well as the fine details of text, outlines and other details Quality from the first print to the last Please ensure that you are purchasing the correct ribbon for your printer.  Please note that this ribbon may not be compatible with a printer purchased outside of the EU due to region restrictions – if you are unsure, please check before purchase. Easy Installation Prints up to 1000 images..

The Entrust Royal Blue Monochrome Ribbon is a monochrome ribbon that produces high-quality line work and text. Includes a cleaning card and cleaning roller for convenient ribbon replacement.  1500 Prints Per Ribbon Royal Blue Monochrome Ribbon Genuine Product For use with Entrust Sigma DS1, DS2 & DS3 ID Card Printers..

Pack Size: 25 lanyards ID Card Centre Part Number: 06-1005 About 10mm Plain Lanyard with Metal Dog Clip These 10mm wide flat, tubular polyester lanyards feature a metal dog clip attachment, a health and safety breakaway, and are available in the following 11 colours:          Lanyard Colour           Pantone Reference           Product Code Black    06-1005-BK Dark Green 3435C 06-1005-DG Light Green 356C 06-1005-LG Navy Blue 655C 06-1005-NB Orange 021C 06-1005-OR Purple 2685C 06-1005-PU Red 1797C 06-1005-RD Royal Blue 286C 06-1005-RB White   06-1005-WH Yellow 109C 06-1005-YW Pink 212C 06-1005-PI..

10mm Plain Lanyard with Plastic Dog Clip Pack size: 25 Lanyards Manufacturer Part Number: 06-1000 About 10mm Plain Lanyard with Plastic Dog Clip 10mm wide flat, tubular polyester lanyards with plastic dog clip attachment and a health and safety breakaway. Available in the following 10 colours.        Lanyard Colour        Plastic Fitting Colour        Pantone Reference        Product Code Black Black   06-1000BK Dark Green Black 341C 06-1000DG Light Green Black 357C 06-1000LG Dark Blue Black   06-1000DB Orange Black Orange C 06-1000O Purple Black 2665C 06-1000P Red Black 1797C 06-1000R Blue Black 286C 06-1000RB White White   06-1000W Yellow White 109C 06-1000Y  ..

Our 10mm plain lanyards are made from high-quality recycled polyester (RPET) and are available in a variety of bright and vibrant colours, making it easy to match your brand, event or organisation. They are comfortable to wear and extremely durable. Breakaway Lanyards for added safety. If the lanyard gets caught up in machinery or is grabbed in attack, the lanyard will automatically snap. It can then be reconnected thanks to the easy fastening mechanism. Length: 92cm (end to end) Width: 10mm Available in multiple colours: Black Dark Blue Light Blue Navy Blue Dark Green Light Green Grey Orange Pink Purple Red White Yellow 25 per pack..

Our 20mm plain lanyards are made from high quality polyester and are available in a variety of bright and vibrant colours, making it easy to match your brand, event or organisation. They are comfortable to wear and extremely durable. These premium lanyards also come with a metal trigger clip and black plastic health and safety breakaway clips so the lanyard can be pulled apart quickly for safe release. Measuring a total 90cm, the drop length from the back of the neck is approximately 45cm. The trigger clip is 2mm thick and suited for any holes of 3mm or bigger. Available in 25 colours 20mm wide 90cm full length/45cm from back of neck 2mm metal trigger clip Black plastic health and safety breakaway clip..

CardKeep 2 Badge holder with plastic swivel clip. Available in black, blue, clear and white. This badge holder has a swivel clip for vertical or horizontal use. Environmentally friendly and easy to handle with thumb grip on both short sides. 100 per pack..

Pack size: 100 Model Number: 329-4402 Fitting Type: Plastic Hook Material: Plastic Cardkeep YO-YO 2 Badge Holder with Retractable Cord. Available in 3 stylish colours: Black, blue and white. These plastic badge holders are designed for functionality and efficiency throughout the office. With the secure clasp attached to an extendable cord, this badge holder is ideal for ID cards or access cards that are in constant use through the day. Either a punched card or a badge holder Compatible with lanyards of your choice at the top end of the badge reel..

Pack size: 100 Colours available: yellow, orange, red, green, blue, black, grey, purple, brown, cream, burgundy, brown. These cards are the same size as a standard credit card (CR80). Create bright and bold designs with our Fotodek plain coloured PVC cards for all your staff cards, membership cards and event ticketing. Our coloured 760 micron thick cards are suitable for printing your organisation or brands designs onto with the use of an ID card printer. These are available in more than 12 colours, shop now! ..

These antimicrobial ID card holders are a great way to hold your ID card whilst helping to prevent the spread of harmful bacteria. These cardholders are available in a range of colours as our standard ID card/badge holders but we are stocking NHS Blue and Natural colours only for next day delivery. Please contact us if you require a different colour. 1. Biomaster helps to disrupt the bacteria cells from growing as they bind to the cell walls. 2. The Biomaster ions stop the bacteria cell from producing energy. 3. The cell’s DNA is interrupted by Biomaster’s active silver technology which prevents any replication. As Biomaster uses 3 ways of stopping bacteria from growing it is far more powerful and effective than regular disinfectants and other antimicrobial agents. Available Colours: In stock: NHS-BL – NHS Blue WH - White NA - Natural 2-3 day lead time: LB - Light Blue (closest Pantone match 300C) NB - Navy Blue (closest Pantone match 2746C) DB - Dark Blue (closest Pantone match 7463C) LG - Light Green (closest Pantone match 3435C) DG - Dark Green (closest Pantone match 356C) GY - Grey OR - Orange PI - Pink PU - Purple RD - Red YW - Yellow BK - Black Made in the UK from recycled, BPA free, food-safe plastic..

These landscape antimicrobial ID card holders are a great way to hold your ID card whilst helping to prevent the spread of harmful bacteria. As Biomaster uses 3 ways of stopping bacteria from growing it is far more powerful and effective than regular disinfectants and other antimicrobial agents: Biomaster helps to disrupt the bacteria cells from growing as they bind to the cell walls. The Biomaster ions stop the bacteria cell from producing energy. The cell’s DNA is interrupted by Biomaster’s active silver technology which prevents any replication. Packs of 100 Evohold landscape holders are available in: NHS-BL – NHS Blue (next day delivery) WH – White (next day delivery) LB – Light Blue (2-3 days) NB – Navy Blue (2-3 days) DB – Dark Blue (2-3 days) LG – Light Green (2-3 days) DG – Dark Green (2-3 days) GY – Grey (2-3 days) OR – Orange (2-3 days) PI – Pink (2-3 days) PU – Purple (2-3 days) RD – Red (2-3 days) YW – Yellow (2-3 days) BK – Black (2-3 days) Made in the UK from recycled, BPA free, food-safe plastic...

These antimicrobial ID card holders are a great way to hold your ID card whilst helping to prevent the spread of harmful bacteria. These cardholders are available in a range of colours as our standard ID card/badge holders but we are stocking NHS Blue and Natural colours only for next day delivery. Please contact us if you require a different colour.  1. Biomaster helps to disrupt the bacteria cells from growing as they bind to the cell walls.  2. The Biomaster ions stop the bacteria cell from producing energy.  3. The cell’s DNA is interrupted by Biomaster’s active silver technology which prevents any replication.   As Biomaster uses 3 ways of stopping bacteria from growing it is far more powerful and effective than regular disinfectants and other antimicrobial agents.       Available Colours:    In stock:   NHS-BL – NHS Blue WH - White Please note that the clear/natural option has been discontinued by the manufacturer and White will be the replacement  (WH - White)   2-3 day lead time:   LB - Light Blue (closest Pantone match 300C) NB - Navy Blue (closest Pantone match 2746C) DB - Dark Blue (closest Pantone match 7463C) LG - Light Green (closest Pantone match 3435C) DG - Dark Green (closest Pantone match 356C) GY - Grey OR - Orange PI - Pink PU - Purple RD - Red YW - Yellow BK - Black   Made in the UK from recycled, BPA free, food-safe plastic..

The EvoHold Antimicrobial Cardholders carry and protect your essential cards. These cardholders feature an antimicrobial surface that stops the growth of harmful bacteria, ensuring you are protected.  With the easy-slide function and multiple compartments, EvoHold is great for people that are always on the move and like to keep their cards safe.. From credit cards to IDs, business cards, and more, these cardholders cater all your essential needs. These cardholders are available in a range of colours as our standard ID card/badge holders but we are stocking NHS Blue and Natural colours only for next day delivery. Please contact us if you require a different colour.  1. Biomaster helps to disrupt the bacteria cells from growing as they bind to the cell walls.  2. The Biomaster ions stop the bacteria cell from producing energy.  3. The cell’s DNA is interrupted by Biomaster’s active silver technology which prevents any replication.   As Biomaster uses 3 ways of stopping bacteria from growing it is far more powerful and effective than regular disinfectants and other antimicrobial agents. Available Colours in stock:  NHS-BL – NHS Blue WH - White Please note that the clear/natural option has been discontinued by the manufacturer and White will be the replacement  (WH - White) 2-3 day lead time: LB - Light Blue (closest Pantone match 300C) NB - Navy Blue (closest Pantone match 2746C) DB - Dark Blue (closest Pantone match 7463C) LG - Light Green (closest Pantone match 3435C) DG - Dark Green (closest Pantone match 356C) GY - Grey OR - Orange PI - Pink PU - Purple RD - Red YW - Yellow BK - Black Made in the UK from recycled, BPA free, food-safe plastic..

The perfect solution if you need to carry 2 cards. Slot one card in the front and one in the back. Available in black, navy blue, royal blue and clear, and also in horizontal and vertical orientation. 100 per pack..

The EvoHold Cardholders, a high quality product with great style and many colours to choose from. With an easyslide function, EvoHold keeps your cards organized and accessible.  Open faced badge holder for ID cards and membership cards. Slotted for clip and necklace. This rigid, economical card holder is a favourite. Made of moulded polypropylene with two ridges on the back of the holder to protect magnetic stripe cards from scratching. Features: 100 cardholders per pack Single-sided card holder capable of securely holding one card Many colours available Offers protection to all cards used to prevent any damage Available colours: WH - White BK - Black (closest Pantone match 6C) NA - Natural (Clear) LB - Light Blue (closest Pantone match 3005C) NB - Navy Blue (closest Pantone match 662C) DB - Dark Blue (closest Pantone match 2965C)DB LG - Light Green (closest Pantone match 348C) DG - Dark Green (closest Pantone match 343C) GY - Grey (closest Pantone match 1485C) OG - Orange (closest Pantone match 2018C) PI - Pink (closest Pantone match 806C) PU - Purple (closest Pantone match 268C) RD - Red (closest Pantone match 185C) YW - Yellow (closest Pantone match 109C) MN - Maroon (closest Pantone match 208C)..

Open-Faced Badge holders - Vertical format. Made of moulded polypropylene with a slot for attaching a clip and two holes for a necklace. The vertical rigid holder is used to display photo ID cards, ID badges, staff identity badges, and membership ID cards. Worn with strap clip or necklaces to prolong the life of ID cards. This rigid, economic badge holder is a favourite. Made with two ridges on the back of the holder to protect magnetic stripe cards from scratch. Available in many colours. 100 per pack..

Clear credit card sized PVC Holders for ID cards and passes. Available with a variety of coloured tops for easy identification of staff or visitors. Colours available: Black, Blue, Green, Red, White, Yellow For inserts of 86x54mm. 100 per pack..

These flexible holders are made of a tough, welded PVC, with a slot ready punched for attaching clips, necklaces or lanyards. Available in a variety of colours for easy colour coding of staff, visitors, etc. Colours available: Black, Blue, Green, Red, Clear and Yellow Pouch Dimension: 100 x 70mm. 100 per pack..